- Performs all types of mechanical inspection including dimensional, in-process machining and assembly, final inspection, receiving inspection, and routine first pieces on fabricated, subcontracted and/or purchased parts.
- Will be required to perform mechanical inspection utilizing Coordinate Measuring Machines and other technical inspection equipment.
- Must be familiar with and capable of learning the use of all measuring instruments, tools, and gages required to perform various mechanical inspection functions.
- Must have a good understanding of shop math and blueprint reading and interpretation including Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5.
- Must have a thorough knowledge of math and blueprint readings/interpretation. Must be familiar with and capable of learning all software associated with the mechanical inspection function and the calibration system including CMM program verification.
- Will be required to maintain inspection equipment and perform scheduled/routine upkeep of CMM's.
- Must be familiar with AS9102 First Article Process and documenting results.
- Must have a thorough knowledge of the correct procedures to follow and precautions to take when performing their work in order to prevent damage to equipment and/or material and injury to themselves and/or others.
- Must be able to properly document in a neat and legible manner all types of errors or discrepancies found.
- Maintains records of results.
- Must maintain a neat, orderly and safe work area.
- Performs miscellaneous duties as required.
- Physical condition allowing:
- May be required to create/learn CMM programming to meet blueprint and work instruction requirements.
- May monitor and verify quality in accordance with statistical process or other control procedures.
- May be required to perform Tool & Gage calibration.
- May be required to train or assist in training new personnel in all types of inspection.
- May be required to participate in off-site training.
- May be required to maintain communication with outside vendors for specific tasks.
- May be required to participate during internal and external audits as required.
- Must be able to read blue prints, work instructions and interpret engineering drawing requirements.
- Must be able to learn software associated with inspection equipment use, operate various CMM's and generate/validate/run programs.
- Proficient computing literacy.
- Proficient knowledge of GD&T per ASME Y14.5.
- Demonstrated ability to use basic measuring devices such as micrometers, gauges, and calipers.
- Familiar with AS9102 First Article Process and documenting results.
- Must be able to demonstrate good training skills and effectively apply them to peers.
- 5 years, formal education in experience/combined education, or equivalent experience/combined education, with additional specialized training in specific aspects of job functions and/or demonstrated ability to perform assigned tasks.
- Demonstrates strong written and verbal communication skills, with both internal and external customers.
- Experience working successfully in a team environment.
- Must be able to support a flexible work schedule supporting overtime, off-Fridays, weekends, and/or alternate shifts to support product schedules as required.
- Ability to pass visual acuity and color perception exam.
- Must be able to obtain a Government Secret security clearance.
- US Citizen.
- Experience working in various fabrication areas and/or previous inspection experience.
- Demonstrated computer skills areas of LM tools including SAP, Apriso, Command Media, PAL and Windchill.
- Navigating SAP/Apriso in areas concerning confirmations, reviewing characteristics, and Nonconformances.
- Technical writing for documenting issues on rejection paperwork.
- Knowledge of ISO 9000/ AS9100.
- Familiarity with CMM software programs (PCDMIS, Calypso, LaserQC).
-
Mechanical Inspector Sr
1 month ago
Lockheed Martin Archbald, United States Full timeJob ID: 666460BR · Date posted: May. 14, 2024 · Description:Lockheed Martin Missiles and Fire Control (MFC) is looking to hire a Mechanical Inspector Sr in Archbald, PA. · Job responsibilities include: · • Performs all types of mechanical inspection including dimensional, in-proc ...
-
Construction Inspector
3 weeks ago
Larson Design Group Scranton, United StatesAbout Us · Larson Design Group (LDG) is an award-winning, employee-owned Architecture, Engineering, and Consulting Firm. Guided by our core values, we're expanding our team, opening new offices, and adding new offerings to provide responsive, innovative solutions to clients nati ...
-
Construction Inspector
3 weeks ago
Larson Design Group Scranton, United StatesJob Description · Job DescriptionAbout Us · Larson Design Group (LDG) is an award-winning, employee-owned Architecture, Engineering, and Consulting Firm. Guided by our core values, we're expanding our team, opening new offices, and adding new offerings to provide responsive, inno ...
-
QC Site Representative
2 weeks ago
Bureau Veritas Group Pocono Pines, United States PermanentA WORLD LEADER IN TESTING, INSPECTION & CERTIFICATION SERVICES · Bureau Veritas offers dynamic, exciting employment opportunities with an attractive salary/benefit package and an opportunity to play a vital role with a global organization. If you would enjoy working in a dynamic ...
-
Print Operator I
1 week ago
Pactiv Evergreen Mountain Top, United StatesOverview: Printer Operator PAY: Starting at $23.22/HR-Paid WeeklySHIFT: 6:30PM till 4:30 AM (Mon.-Thur) ABOUT US: Fabri-Kal is now Pactiv Evergreen Inc. (NASDAQ: PTVE) is a leading manufacturer and distributor of fresh foodservice and food merchandising products and fresh beverag ...
-
Print Operator I
1 week ago
Pactiv Evergreen Mountain Top, United States Full timeOverview: Printer Operator · PAY: Starting at $23.22/HR · -Paid Weekly · SHIFT: 6:30PM till 4:30 AM (Mon.-Thur) · ABOUT US: Fabri-Kal is now Pactiv Evergreen Inc. (NASDAQ: PTVE) is a leading manufacturer and distributor of fresh foodservice and food merchandising products and fre ...
-
Site Superintendent
1 week ago
The H&K Group Pocono Lake, United StatesH&K · does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join ...
-
Pipe Foreperson
1 week ago
The H&K Group Pocono Lake, United StatesH&K · does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join ...
-
Vehicle Condition Inspector
5 days ago
ACV Auctions Scranton, United StatesIf you are looking for a career at a dynamic company with a people-first mindset and a deep culture of growth and autonomy, ACV is the right place for you Competitive compensation packages and learning and development opportunities, ACV has what you need to advance to the next le ...
-
Print Operator I
1 week ago
Pactiv Evergreen Mountain Top, United StatesOverview: · **Printer Operator** · **PAY**:Starting at $23.22/HR** · **SHIFT**:6:30PM till 4:30 AM (Mon.Thur)** · Our Hazleton, PA location is currently seeking dependable Inspector Packers to join our team. · Our Social Responsibility platform features a robust, employee-led Giv ...
-
Inspector Packer
10 hours ago
Pactiv Evergreen Mountain Top, United StatesOverview: · **ROLE**: Inspects and packages product, rotates throughout production lines as directed by the Team Leader. Works independently (though informed by line technician as well as other IP's) and assures the product that he/she is packing is free of defects and meets all ...
-
Inspector Packer
1 week ago
Pactiv Evergreen Mountain Top, United StatesOverview: · **ROLE**: Inspects and packages product, rotates throughout production lines as directed by the Team Leader. Works independently (though informed by line technician as well as other IP's) and assures the product that he/she is packing is free of defects and meets all ...
Mechanical Inspector Sr - Archbald, United States - Lockheed Martin Corporation
![Default job background](https://contents.bebee.com/public/img/bg-user-ex-1.jpg)
Description
:Lockheed Martin Missiles and Fire Control (MFC) is looking to hire a Mechanical Inspector Sr in Archbald, PA.
Job responsibilities include:
b) Standing, sitting, bending, walking, 10+ hours per day
c) Personal protective equipment including Steel-toed shoes, safety glasses, hearing protection, and wearing a respirator when required.
In addition, the selected candidate may be required to participate in the following:
Basic Qualifications:
Desired Skills:
Security Clearance Statement:
This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level:
Secret
Other Important Information You Should Know
Expression of Interest:
By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match.
Should this match be identified you may be contacted for this and future openings.Ability to Work Remotely:
Onsite Full-time:
The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules:
Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed.
These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position:
4x10 hour day, 3 days off per week
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within days of the requisition posting date in order to receive optimal consideration.
As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges.
Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Experience Level:
Hourly/Non-Exempt
Business Unit:
MISSILES AND FIRE CONTROL
Relocation Available:
No
Career Area:
QA/Test and Inspection
Type:
Full-Time
Shift:
Second