Jobs
>
Montgomery

    Mold Setter - Montgomery, United States - Mobis Alabama, LLC

    Default job background
    Description

    Job Description

    Job Description

    Summary

    The Mold Setter is responsible for completing mold changes (Setups) when changes (Setups) are required as dictated by the molding production schedule.

    Essential Functions (To perform within this position successfully, the incumbent must be able to perform each essential duty satisfactorily. Other duties may be assigned.)

    Perform mold changes according to production schedule.
    - Perform End of Arm Tool changes as needed.
    - Prioritize mold changes with supervisor, manager, and Production Control when multiple orders need to be completed.
    - Operate overhead cranes to move mold tools in a safe manner.
    - Follow and complete mold change checklist as the mold change progresses.
    - Communicate mold change activities with Maintenance, Process Technicians, Resin Handlers, and Team Leaders to ensure efficiency of mold change process.
    - Communicate to appropriate parties any developments that will create safety, quality, or production issues.
    - Preform start of shift Crane safety inspection daily and verify via Crane inspection check sheet.
    - Maintain mold management system by entering data after each mold change.
    - Continuously seek opportunities for improvement in safety, quality, and productivity.
    - Perform all work within the specification of the mold change procedures.
    - Perform in-press mold cleanings as needed as well as cleaning of tool back plates along with any other preventative maintenance as needed.
    - Maintain IMM Mag Plates by making sure that they are always clean and free of any debris that may cause damage to tool or back plate.
    - Troubleshoot issues with hydraulic, pneumatic, and electrical connections, as well as Thermolator equipment.
    - Maintain 3R5S of machines and work area.
    - Comply with all safety rules and guidance such as ISO 14001, OHSAS 18001 and IATF16949
    - All other duties as assigned.

    Supervisory Responsibilities: None or Yes (Feel free to describe if clarification would be helpful.)

    No Click here to enter text.

    Basic Qualifications (The requirements listed below are representative of the knowledge, skills, and/or ability required and preferred for this position.)

    Required Education & Experience:

    High school diploma or equivalent, plus 3 years of experience in a high-volume manufacturing environment

    Required Knowledge, Skills, & Abilities:

    Good written and verbal communication skills
    - Strong problem solving and mechanical skills
    - Ability to make good decisions and take decisive action in a fast-paced environment

    Preferred Education & Experience:

    Just-in-Time manufacturing experience
    - Just-in-Sequence manufacturing experience
    - Knowledge of Lean Manufacturing Practices
    - Overhead crane operator certification

    Certificates, Licenses, and Registrations: List any if required.

    Click here to enter text. Click here to enter text.

    Working Conditions

    Traversing around Molding Department

    Operating heavy equipment

    Ascending/descending stairs and ladders

    Maneuvering on top of mold tools up to 15 feet high

    Lifting minimum of 50 lbs.

    Work overtime as needed (Including Weekends)

    Company DescriptionWho is Hyundai MOBIS?

    Hyundai MOBIS forms the parts and service arm for South Korean automakers Hyundai Motor Company, Genesis Motors, and Kia Motors. The company offers chassis, cockpit, and front-end modules; safety products, including airbags, headlights, anti-lock brake systems, and electronic stability control products; steering parts; multimedia systems; UVO systems; injection-molded plastic parts, such as instrument panels, carriers, and bumpers; and steel wheel rims and decks. It also supplies after-sales service parts for vehicles. Concentrating its resources on after-sales parts, module parts manufacture, and parts export, Hyundai MOBIS has firmly established its position as one of the leading auto parts specialist companies in the world.

    Hyundai MOBIS's Module Division, of which MOBIS Alabama, LLC is part, has supplied the three major modules, chassis module, cockpit module, and front-end module, to automakers in the just-in-sequence (JIS) system. Participating in the initial stages of a new vehicle development process, Hyundai MOBIS performs research and development of auto-parts, taking into account the specifications for modules, including designing and testing for production applications. Through system integration of modularization, Hyundai MOBIS is contributing to increased competitiveness and in-sequence processing, reducing total weight and the number of parts needed. This allows for easier assembly, effective inventory control, and cost reduction.

    Who is MOBIS Alabama?

    Established in 2002 and operating on nearly 83 acres in Montgomery, Alabama, MOBIS Alabama, LLC is the largest Tier 1 supplier to both Hyundai Motor Manufacturing Alabama (HMMA) and KIA Motor Manufacturing Georgia (KMMG). With a commitment to quality, we pride ourselves on providing state-of-the-art Modules, Assemblies, and genuine Hyundai and KIA after-service parts. We hold both the ISO14001 and IATF16949 Certifications for Environmental Management and Quality Management.

    Our process begins in the sprawling 600,000 square-foot Plastics plant where we use injection molding to produce front and rear bumpers, instrument panel frames, and after-service parts. Our bumpers are molded and painted in-house. Bumpers for HMMA are also assembled in-house before transfer to HMMA for final assembly, while bumpers for KMMG are sent to our sister plant in Georgia for assembly. After molding, instrument panel frames move to the Module plant next door where we prepare them to receive additional parts to form a complete Cockpit (dashboard) assembly. Also in the Module building are our front and rear Chassis (vehicle suspension) assembly lines. Here, parts from Tier 2 and 3 suppliers are assembled into completed Chassis modules which are transported to nearby HMMA for final vehicle assembly.

    Our Redistribution Center (RDC) supplies genuine Hyundai and KIA after-service parts to dealerships, auto parts stores, and other parts distribution centers. We receive parts from suppliers globally which are distributed across North America to satisfy our customers' demand for high-quality automotive parts.

    Company Description

    Who is Hyundai MOBIS?\r
    \r
    Hyundai MOBIS forms the parts and service arm for South Korean automakers Hyundai Motor Company, Genesis Motors, and Kia Motors. The company offers chassis, cockpit, and front-end modules; safety products, including airbags, headlights, anti-lock brake systems, and electronic stability control products; steering parts; multimedia systems; UVO systems; injection-molded plastic parts, such as instrument panels, carriers, and bumpers; and steel wheel rims and decks. It also supplies after-sales service parts for vehicles. Concentrating its resources on after-sales parts, module parts manufacture, and parts export, Hyundai MOBIS has firmly established its position as one of the leading auto parts specialist companies in the world.\r
    \r
    Hyundai MOBIS's Module Division, of which MOBIS Alabama, LLC is part, has supplied the three major modules, chassis module, cockpit module, and front-end module, to automakers in the just-in-sequence (JIS) system. Participating in the initial stages of a new vehicle development process, Hyundai MOBIS performs research and development of auto-parts, taking into account the specifications for modules, including designing and testing for production applications. Through system integration of modularization, Hyundai MOBIS is contributing to increased competitiveness and in-sequence processing, reducing total weight and the number of parts needed. This allows for easier assembly, effective inventory control, and cost reduction.\r
    \r
    Who is MOBIS Alabama?\r
    \r
    Established in 2002 and operating on nearly 83 acres in Montgomery, Alabama, MOBIS Alabama, LLC is the largest Tier 1 supplier to both Hyundai Motor Manufacturing Alabama (HMMA) and KIA Motor Manufacturing Georgia (KMMG). With a commitment to quality, we pride ourselves on providing state-of-the-art Modules, Assemblies, and genuine Hyundai and KIA after-service parts. We hold both the ISO14001 and IATF16949 Certifications for Environmental Management and Quality Management.\r
    \r
    Our process begins in the sprawling 600,000 square-foot Plastics plant where we use injection molding to produce front and rear bumpers, instrument panel frames, and after-service parts. Our bumpers are molded and painted in-house. Bumpers for HMMA are also assembled in-house before transfer to HMMA for final assembly, while bumpers for KMMG are sent to our sister plant in Georgia for assembly. After molding, instrument panel frames move to the Module plant next door where we prepare them to receive additional parts to form a complete Cockpit (dashboard) assembly. Also in the Module building are our front and rear Chassis (vehicle suspension) assembly lines. Here, parts from Tier 2 and 3 suppliers are assembled into completed Chassis modules which are transported to nearby HMMA for final vehicle assembly.\r
    \r
    Our Redistribution Center (RDC) supplies genuine Hyundai and KIA after-service parts to dealerships, auto parts stores, and other parts distribution centers. We receive parts from suppliers globally which are distributed across North America to satisfy our customers' demand for high-quality automotive parts.