- Setup & Operate CNC Vertical Turret Lathe to fabricate metallic and nonmetallic parts by performing the following duties.
- Setup and operate VTLs – Utilize knowledge of working properties and machining processes for a wide variety of materials such as stainless steel, Monel, Hastalloy, other nickel alloys, cast iron, carbon steel, bronze, aluminum, plastics, etc.
- Manufacture components within the allotted time estimates provided on job travelers.
- Ensure customer satisfaction with products and service.
- Make process recommendations for improved efficiency and works with the CNC Programmer to optimize processes, programs and cutting tools.
- Take a proactive approach to continuous improvement including productivity, quality, safety, environmental and ergonomics.
- Setup, and operate VTLs with minimal supervision
- Must have Proficient Knowledge of G Code with the ability to perform manual CNC program edits as required to complete job work scope
- Read and interpret customer drawings with an understanding of Geometric Dimensioning and Tolerances per ANSI Y-14.5
- Inspect work produced (1st piece and in-process inspection) using precision measuring equipment including: micrometers, bore gauges, dial calipers, or other measuring instruments to verify conformance to specifications. Maintain tolerances as close as 0.002" over 55" diameter
- Where required, document inspection results on supplied IDS Sheets and/or Inspection Prints
- Keep equipment (machine, gauging, tooling, etc) clean and well maintained and maintain a clean and orderly work area
- Follow preventative maintenance procedures on equipment as prescribed by supervisor and report operating difficulties of equipment
- Document daily activities to assure performance in accordance with job standards
- Work effectively with peers and management in a team-oriented environment, assisting/training other employees as required
- Willing to work overtime when needed to satisfy customer requirements
- Employee may be required to operate forklifts and have the ability to safely rig and handle product up to 4 tons
- Must be able to stand, twist, bend, and repeatedly lift up to 50 lbs. Must be able to use hands and vision to complete coordinated actions
- Work practices to be in accordance with Company Policies including, but not limited to attendance, confidentiality, safety and substance abuse
- The employee may be required to follow other job-related instructions and to perform other job related tasks as required, subject to applicable state and federal law
- Mastercam Programming experience
- Ability to setup & operate Horizontal Boring Mills, and/or Horizontal/Vertical Machine Centers
- Experience working in an ISO-9001 or AS9100 Quality Environment.
- Medical / Dental / Vision / Life Insurance
- Vacation / PTO
- 10-Paid Holidays
- 401k with company match
- Profit Sharing
- Clean, Climate-Controlled working environment
-
CNC Vertical Turret Lathe Machinist
1 week ago
Billet Industries York, United StatesMain Job Duties · Setup and operate CNC Vertical Turret Lathe to fabricate metallic and nonmetallic parts by performing the following duties. · Key Objectives · Setup and operate VTLs - Utilize knowledge of working properties and machining processes for a wide variety of material ...
-
Machinist / Manual Lathe Mill
1 week ago
Cleveland Brothers Equipment Company Camp Hill, United StatesJob Description · Job DescriptionCleveland Brothers, the largest Cat dealer in Pennsylvania, northern West Virginia and western Maryland, has an immediate opportunity for a Machinist / Manual Lathe Mill. · Join our service experts and be part of a team using the latest tooling fo ...
-
CNC Machinist
1 week ago
Coupling Corporation of America York, United StatesAbout us · Join a family-owned company with growing capacities. Learn several new skills on the job within the machining, grinding, and assembly areas. · We are looking for a skilled Machinist to set up, maintain and operate CNC lathes and mills. A great machinist is reliable a ...
-
Machinist
3 weeks ago
Mauser Packaging Solutions Hershey Heights, United StatesMauser Packaging Solutions is a global leader in solutions and services across the packaging lifecycle, providing large and small metal, plastic, fiber and hybrid packaging worldwide to companies in industries from food, beverage, personal care and pharmaceuticals to chemicals, p ...
-
Manual Machinist I- 2nd Shift
2 weeks ago
Motor Technology, Inc York, United StatesJob Description · Job DescriptionMotor Technology, Inc. is committed to fostering a supportive, valued, and motivated work environment that encourages teamwork, innovation, personal and professional growth, and work-life balance. Our comprehensive employee benefits package includ ...
-
Cnc Setup Machinist
1 week ago
Aerotek York, United States**Description:** · The CNC Set-Up Machinist will be responsible for the setting up of CNC Lathes and some Mills in the Machine Shop. They are expected to be highly experienced in setting up CNC Machines of various axis and styles. They will be responsible for taking a blueprint ...
-
Cnc Setup Machinist
1 week ago
Aerotek York, United States**Job Title: CNC Set-Up Machinist****Job Description**The CNC Set-Up Machinist will be responsible for setting up CNC Lathes and some Mills in our Machine Shop. The successful candidate will handle everything from taking initial blueprints and programs to documenting processes to ...
-
Cnc Setup Machinist
1 week ago
Aerotek York, United States**Job Title: CNC Set-Up Machinist** · **Job Description** · The CNC Set-Up Machinist will be responsible for setting up CNC Lathes and some Mills in our Machine Shop. The successful candidate will handle everything from taking initial blueprints and programs to documenting proc ...
-
Manual Machinist I
1 week ago
Motor Technology, Inc York, United StatesJob Description · Job DescriptionThis position is for experienced Manual Machinist only. Not intended for Machine Operators. · As a national leader in providing superior electro-mechanical repairs and services, we are currently seeking a 1st shift Manual Machinist for our machine ...
-
Manual Machinist I
6 days ago
Motor Technology, Inc York, United StatesJob Description · Job DescriptionMotor Technology, Inc. strives to create an environment where employees feel supported, valued, and motivated. We do this by providing a workplace that encourages teamwork, innovation, personal and professional growth, work-life balance, and a com ...
-
Manual Machinist I
2 weeks ago
Motor Technology, Inc York, United StatesJob Description · Job DescriptionMotor Technology, Inc. strives to create an environment where employees feel supported, valued, and motivated. We do this by providing a workplace that encourages teamwork, innovation, personal and professional growth, work-life balance, and a com ...
-
Manual Machinist I- 2nd Shift
1 week ago
Motor Technology Inc York, United StatesMotor Technology, Inc. strives to create an environment where employees feel supported, valued, and motivated. We do this by providing a workplace that encourages teamwork, innovation, personal and professional growth, work-life balance, and a commitment to doing what is best for ...
-
Machinist II
2 days ago
Voith Group York, United StatesAbout the Voith Group · The Voith Group is a global technology company. With its broad portfolio of systems, products, services and digital applications, Voith sets standards in the markets of energy, paper, raw materials and transport & automotive. Founded in 1867, the company ...
-
CNC Setup Machinist
3 weeks ago
Aerotek York, United States**Description:** · The CNC Set-Up Machinist will be responsible for the setting up of CNC Lathes and some Mills in the Machine Shop. Will be expected to be highly experienced in setting up CNC Machines of various axis and styles. · Each new job process will involve: · + Taking ...
-
Cnc Setup Machinist
3 weeks ago
Aerotek York, United States**Description:**The CNC Set-Up Machinist will be responsible for the setting up of CNC Lathes and some Mills in the Machine Shop. They are expected to be highly experienced in setting up CNC Machines of various axis and styles. They will be responsible for taking a blueprint and ...
-
CNC Setup Machinist
3 weeks ago
Aerotek York, United States**Description:** · The CNC Set-Up Machinist will be responsible for the setting up of CNC Lathes and some Mills in the Machine Shop. They are expected to be highly experienced in setting up CNC Machines of various axis and styles. They will be responsible for taking a blueprint ...
-
Machinist (York, Pennsylvania (US))
3 weeks ago
Voith Group York, United StatesAbout the Voith Group · The Voith Group is a global technology company. With its broad portfolio of systems, products, services and digital applications, Voith sets standards in the markets of energy, paper, raw materials and transport & automotive. Founded in 1867, the company ...
-
CNC Setup Machinist
3 weeks ago
Aerotek York, United States**Description:**The CNC Set-Up Machinist will be responsible for the setting up of CNC Lathes and some Mills in the Machine Shop. Will be expected to be highly experienced in setting up CNC Machines of various axis and styles.Each new job process will involve:+ Taking initial blu ...
-
Manual Machinist I
2 weeks ago
Motor Technology, Inc York, United StatesMotor Technology, Inc. strives to create an environment where employees feel supported, valued, and motivated. We do this by providing a workplace that encourages teamwork, innovation, personal and professional growth, work-life balance, and a commitment to doing what is best for ...
-
Machinist
3 weeks ago
Mauser Packaging Solutions York, United StatesMauser Packaging Solutions is a global leader in solutions and services across the packaging lifecycle, providing large and small metal, plastic, fiber and hybrid packaging worldwide to companies in industries from food, beverage, personal care and pharmaceuticals to chemicals, p ...
CNC Vertical Turret Lathe Machinist - York, United States - Cannonball Recruiting LLC
Description
Job Description
Job DescriptionFirst Shift: Mon - Fri (7am to 3pm)
$28-32/hr.
Located in York, PA
Position Summary:
Key Objectives and Expected Outcome:
Essential Job Functions:
These qualifications are a plus, but not required:
Benefits: