- Follow all safety procedures and work as safe as possible at all times.
- Maintain Good Manufacturing Practices (GMP's).
- Perform basic metal fabrication using hand tools.
- Repair bearings, belt sprockets, chains, and gearboxes.
- Repair compressed air systems.
- Repair conveyor controls and devices.
- Perform conveyor lubrication and inspection.
- Repair and inspect hydraulic powered equipment.
- Perform Lock Out Tag Out (LOTO) procedures when necessary.
- Install and repair PVC, copper, stainless and steel pipe systems.
- Troubleshoot and repair pumps and valves.
- Adjust, repair, and maintain various production equipment including, dud detector, cap sorter, bulk unloading system, silo system, chlorine injection systems, conveyors, depalletizers, palletizers, seamers, labeling equipment, fillers, rinsers, shrink wrap machines, air dryers, case coders, blend room equipment, and other production systems and equipment.
- Maintain and repair HTST processing systems.
- Maintain and repair Nitrogen Injection systems.
- Maintain and repair Clean in Place (CIP) systems.
- Change over, maintain, troubleshoot and repair all packaging equipment.
- Maintain and repair inspection systems, such as vision level sensors, X ray systems, and dud detection.
- Assist with training Maintenance Mechanics.
- Observes mechanical devices in observation and listens to their sounds to locate the cause of trouble.
- Dismantles devices to gain access to and remove defective parts.
- Adjust functional parts of devices and control instruments.
- Repairs and/or replaces defective parts.
- Install special functional and structural parts on equipment.
- Lubricates and clean parts.
- Start devices to test their performance.
- Set up and operate drill press, grinder, and other metalworking tools to make and repair parts.
- Maintain and document preventative maintenance program.
- Troubleshoot and repair electrical equipment.
- Initiate Purchase Orders (PO) for parts.
- Respond to line service calls in support of production.
- Other duties as assigned at discretion of management.
- Maintain a positive work atmosphere and interaction with customers, co-workers, and management.
- Regular and punctual attendance.
- Work scheduled shift, weekends, and extended hours as required.
- To perform this job successfully, must be able to perform each fundamental task listed above satisfactorily.
- Ability to add, subtract, multiply and divide in all units of measures, using whole, numbers, common fractions, and decimals.
- Ability to interpret a variety of instructions finished in written, oral, diagram or schedule form.
- Ability to understand, record and communicate product description and codes.
- Strong problem-solving skills.
- Demonstrated ability to meet productivity standards.
- Ability to read, analyze and interpret mechanical drawings, required for parts identification.
- Ability to read, analyze and interpret electrical schematics, required for troubleshooting electrical circuits.
- Effective written and verbal communication skills with the ability to communicate professionally with customers and co-workers.
- Have a strong work ethic and be able to work independently as well as working in a team.
- Demonstrates attention to detail, a professional attitude, and produces accurate work product.
- Must be proactive.
- Must have a cooperative attitude.
- Must have the ability to follow-up.
- Must be able to work in a fast-paced environment.
- High school diploma or general education degree (GED) required.
- Two years related experience and/or training; or equivalent combination of education and experience.
- Experience in a Beverage/Food Manufacturing environment or equivalent technical training is preferred.
- Ability to weld, ARC and MIG (TIG), desired.
- Upholds mental, spiritual and physical safety.
- Asks for and provides feedback.
- Holds self and others accountable.
- Supportive and collaborative of team members
- Participates in self-development and encourages the development of those who report/to him or her and peers.
- Demonstrates flexibility and desire for growth.
-
Construction mechanic
1 week ago
Velocity Solutions Fullerton, United StatesConstruction Mechanic (m/f/d) Due to our extensive experience in the German job market, renowned and future-oriented companies have trusted the personnel service of the expertum Group for 30 years. We bring together the ideas and wishes of excellent candidates with the requiremen ...
-
Auto glass mechanic
1 week ago
NovaTech Solutions Fullerton, United StatesWe, Autoglas Darmstadt Blechmann GmbH, are an established craft business with 40 years of experience in the field of glazing for cars, trucks, and buses. As a specialized workshop with the highest quality standards, we offer immediate installation without prior appointment and ar ...
-
Mechanical Engineer
3 weeks ago
Lumicity Anaheim, United StatesMechanical Engineer / Energy / Anaheim, CA · This position is for an Energy company located in Anaheim, CA and is an on-site position. The successful person will have a Mechanical Engineering background with experience working on rotating equipment, ideally in an industrial, oil ...
-
Mechanical Engineer
2 weeks ago
Insight Global Anaheim, United StatesRequired skills and experience · B.S. Aerospace/Mechanical Engineering or equivalent with 3+ years of experience · Experience with sheet metal, machined parts, and composite parts · Experience with Catia V5 or Catia 3DX · Day to day responsibilities: · Design Brackets for support ...
-
Plant mechanic
1 week ago
SilverLinx Orange, United StatesOur client company in the trade industry, located in Paderborn, is in need of your support. We are currently looking for a plumber (m/f/d) to join our team as soon as possible. WHAT TO EXPECT: * Installation work (new and existing buildings) in the areas of plumbing, heating, and ...
-
Dual Study Mechanical Engineering
1 week ago
Infinity Systems Fullerton, United StatesAbout the Company · Our company provides safety, stability, and ultimate performance to glass manufacturers in over 80 countries. We are a family-owned business founded in 1872 and still run by the Sorg family in its fifth generation. We produce highly advanced glass furnaces for ...
-
Training as a wood mechanic
1 week ago
Infinity Ventures Garden, United States"Gone are the days of just being a carpenter in the garden. At our company, we offer a forward-thinking apprenticeship program for Wood Mechanics (M/F/D) where you will learn to work with materials that go beyond just wood. With our state-of-the-art machinery in our production fa ...
-
Mechanic
1 day ago
Sulzer Orange, United StatesMechanic - Full Time - Orange (TX), United States · At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expert ...
-
Plant mechanic
1 week ago
Stellar Ventures Villa Park, United StatesAbout SPIE Wiegel GmbH: · With over 50 years of experience in the building technology industry, our company, headquartered in Kulmbach in Upper Franconia, delivers expertise for complex project solutions to our clients. Our success is driven by innovative visions that are brought ...
-
Mechanical Test Engineer
1 day ago
Lumicity Anaheim, United StatesMechanical Test Engineer / Energy / Anaheim, CA · This position is for an Energy company located in Anaheim, CA and is an on-site position. The successful person will have a Mechanical Engineering background with experience working on rotating equipment, ideally in an industrial ...
-
Apprentice for industrial mechanic
1 week ago
Infinity Enterprises Orange Park, United StatesCODAN Medical Devices GmbH specializes in the production and distribution of medical transmission systems. With over 60 years of research and development, CODAN is recognized as a supplier of high-quality products. At our headquarters in Lensahn, around 480 employees work success ...
-
Mechanical Engineer
2 weeks ago
Russell Tobin Anaheim, United StatesJob DescriptionJob DescriptionRussell Tobin has an opening for Ride & Show Mechanical Engineer in Anaheim This is a long-term contract opportunity Seeking candidates with 2-5 years of experience. · Compensation: $56.74/hr. · Hours: 7 a.m. to 4 p.m. (may need to come in on some ...
-
Maintenance Mechanic
3 weeks ago
Harvest Hill Beverage Company Anaheim, United StatesJob Description · Job DescriptionPLEASE READ JOB DESCRIPTION FULLY BEFORE APPLYING · PRIMARY PURPOSE: · The Maintenance Technician is responsible for setting up repairs, rebuilding and installing production equipment to insure continuous production of all products. Repairs malfun ...
-
Mechanical Engineer
2 weeks ago
J.S. Held Anaheim, United StatesJob Description · Job DescriptionSalary: · The Company · Are you looking to join an organization that is growing and dynamic? What about a high-energy, collaborative environment that rewards hard work? · J.S. Held is a global consulting firm that combines technical, scientific, ...
-
Maintenance Mechanic
3 days ago
Harvest Hill Beverage Company Anaheim, United StatesPLEASE READ JOB DESCRIPTION FULLY BEFORE APPLYING · PRIMARY PURPOSE: · The Maintenance Technician is responsible for setting up repairs, rebuilding and installing production equipment to insure continuous production of all products. Repairs malfunctioning production equipment; i. ...
-
Mechanical Engineer
1 week ago
J.S. Held LLC Anaheim, United StatesThe Company · Are you looking to join an organization that is growing and dynamic? What about a high-energy, collaborative environment that rewards hard work? · J.S. Held is a global consulting firm that combines technical, scientific, financial, and strategic expertise to advi ...
-
Pump Mechanic
17 hours ago
Axis Mechanical Services Anaheim, United StatesJob Description · Job DescriptionSeeking qualified individuals for troubleshooting, repair, maintenance, and installation of rotating equipment. This Job requires experience with repairs of pumps, motors, drives and rotating equipment for the water and waste-water industries. Wou ...
-
Sound Mechanic
1 day ago
Walt Disney Co. Anaheim, United States Full timeJob Summary: · Can you imagine walking around Disneyland, knowing you help the fun stay up and running? If you're interested in doing work that makes people feel happy and safe, keep reading... · We're looking for skilled, confident Electronic Technicians who have experience main ...
-
Sound Mechanic
1 week ago
Disneyland Resort San Francisco, United States PermanentCan you imagine walking around Disneyland, knowing you help the fun stay up and running? If you're interested in doing work that makes people feel happy and safe, keep reading · We're looking for skilled, confident Electronic Technicians who have experience maintaining and repai ...
-
Maintenance Mechanic
4 days ago
Disneyland Resort Sunkist, CA, United States Full timeWhen you visit Disneyland Resort, are you the one in your group looking at how things work? Are you an industrial-maintenance mechanic - and do you enjoy working with your hands and repairing large equipment? Are you tired of companies closing their doors or moving out of state? ...
Mechanic - Anaheim, United States - MBV-CA LLC
Description
Job Description
Job DescriptionJob Details
Shifts: Flexible
Location: Anaheim
Hourly: $ $38.70 DOE
**Incumbent eligible for a $500 signing bonus payable after 6 months of continuous service **
Medical benefits-eligible first of the month following 28 days of employment. All other benefits-eligible first of the month following 90 days of employment.
Benefits:
401(k) with generous Company match
Dental insurance
Health insurance
Health Savings Account
Flexible Spending Account
Life insurance
Paid time off
Employee Referral Program
Vision insurance
Position Overview: The Maintenance Mechanic is responsible for installing, maintain, and repair machinery and equipment, e.g.- Seamers, conveyor systems, motors, pumps, production machines, in a beverage manufacturing environment.
Language Skills: English proficiency required. Spanish is a plus.
Supervisory Responsibilities: None.
Amount of Travel Involved: None.
Essential Duties and Responsibilities:
Experience for success:
Education and/or Experience:
Behaviors & Competencies:
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to talk and hear. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to handle or feel and reach with hands and arms. The employee is regularly required to climb up and down stairs and perform repetitive motions. The employee is frequently required to climb or balance; stoop, kneel, squat, or crawl. The employee is occasionally required to sit. The employee must regularly push, pull, lift up to 25 pounds, frequently push, pull up to 30 pounds and occasionally push, pull lift up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception and ability to adjust focus.
Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The employee is regularly exposed to high, precarious places; fumes or airborne particles; toxic or caustic chemicals; extreme cold and extreme heat. The noise level in the work environment is usually very loud.
Manna Beverages & Ventures is an equal opportunity employer-----M/F/D/V