Jobs
>
Chester

    CNC Lathe Machinist - Chester, United States - International Staff Consulting

    International Staff Consulting
    International Staff Consulting Chester, United States

    4 weeks ago

    Default job background
    Description

    Position:
    CNC Lathe Machinist (2nd Shift)

    Shift: 1 Hours: 7AM-3:30PM Type: Full-Time | Mode:

    Direct Placement Pay Scale:
    $2- 30/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with at least 5-Axis Experience. The Candidate will be required to perform Setup, Operate Machines and Adjust Machines with minimal supervision.


    Job Responsibilities:
    Set up and operate CNC Lathe machines (Horizontal and/or Vertical)

    Verify tool lengths (including:
    setting of tool geometries and offsets).Set up and change fixtures, clamp fixtures and clamps as required.
    Load and unload fixtures using overhead cranes, slings, chains etc.
    Adjustment of offsets.
    Produce conforming first piece products to process drawing and quality specifications.
    Achieve specified quality standards.

    Hold tight tolerances on large 28+ partsProficiently use a variety of manual gauges which includes but not limited to swing gauges, callipers and OD mics.

    Conform to specified health and safety standards.
    Report any issues or problems to Supervision immediately.

    Work within the designated workgroup to plan, prioritize and perform work to satisfy customer and company needsCarry out daily TPM activities as requiredProvide guidance and assistance to other team members as neededExecute a Zero Defects & Right First time culture.

    Propose Operational Excellence & Continuous Improvements to management.
    Provide Root Cause & Corrective Action (RCCA) support.
    Ensure parts are handled and protected in a suitable manner to prevent damage during operations and movement.
    Comply with any other guidelines as defined in the Employee Handbook.
    Comply with company housekeeping standards.
    Adhere to company EH & S Policies.
    To perform other such duties as generally correspond to the nature of the position and its level of responsibility.
    RequirementsHigh School Diploma or GED5 + years of CNC experience, 2+ years in Lathe/VTL experience preferred.
    Knowledge in Fanuc and OSP controls
  • Lincoln Search Consultants Inc

    CNC Lathe Machinist

    3 weeks ago

    Lincoln Search Consultants Inc Chester, United States

    Position: CNC Lathe Machinist (2nd Shift)Shift: 1 Hours: 7AM-3:30PM Type: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with at least 5-Axis Experience. The Candidate will be required to perform Se ...

  • Gables Search Group

    CNC Lathe Machinist

    3 weeks ago

    Gables Search Group Chester, United States

    Position: CNC Lathe Machinist (2nd Shift) · Shift: 1 Hours: 7AM-3:30PM · Type: Full-Time | Mode: Direct Placement · Pay Scale: $26 - 30/hr | Industry: Manufacturing · Our Client is Seeking a CNC Milling Machinist with at least 5-Axis Experience. The Candidate will be required ...

  • Bestlogic Staffing

    CNC Lathe Machinist

    3 weeks ago

    Bestlogic Staffing Chester, United States

    About the job CNC Lathe Machinist · Position: CNC Lathe Machinist (2nd Shift) · Shift: 1 Hours: 7AM-3:30PM · Type: Full-Time | Mode: Direct Placement · Pay Scale: $26 - 30/hr | Industry: Manufacturing · Our Client is Seeking a CNC Milling Machinist with at least 5-Axis Exper ...

  • Wilcox Industries

    CNC Lathe Operator Machinist

    1 week ago

    Wilcox Industries Newington, United States

    If you are ready to take on a fresh challenge, grow your career, and contribute to supporting homeland defense and armed services, Wilcox Industries is ready to help you achieve your goals. We are currently seeking a full-time CNC Lathe Operator Machinist for our second shift (Mo ...

  • Adecco

    CNC Milling/Lathe Machinist

    1 week ago

    Adecco Wethersfield, United States

    Job Description · Job DescriptionAdecco is assisting a client in Wethersfield, CT in hiring for CNC Milling/Lathe Machinists. If you have milling or lathe experience, please apply now · Our client is a well-established, family-owned aerospace manufacturer in Wethersfield for 75+ ...

  • Wilcox Industries

    CNC Lathe Operator Machinist

    3 weeks ago

    Wilcox Industries Newington, United States

    If you are ready to take on a fresh challenge, grow your career, and contribute to supporting homeland defense and armed services, Wilcox Industries is ready to help you achieve your goals. We are currently seeking a full-time CNC Lathe Operator Machinist for our second shift (Mo ...

  • Express Employment Professionals - Meriden

    CNC Machinist

    1 week ago

    Express Employment Professionals - Meriden Hartford, United States

    Please do not apply if you don't live in the US or if you do not have CNC experience. · Experienced CNC Machinists for full-time 1st shift positions. The ideal candidates would be as follows: · 3-5+ years' experience in setup and operation of CNC mills and/or lathes, with a prim ...

  • Regal Rexnord

    Machinist

    2 weeks ago

    Regal Rexnord New Hartford, United States Full time

    The Machinist will operate and adjust various pieces of equipment to perform any combination of machinery operations. Operators in this classification are required to read part prints, specifications, and sketches. They are also required to read operation sheets and method sheets ...

  • Regal Rexnord

    Machinist

    4 weeks ago

    Regal Rexnord New Hartford, United States Full time

    The Machinist will operate and adjust various pieces of equipment to perform any combination of machinery operations. Operators in this classification are required to read part prints, specifications, and sketches. They are also required to read operation sheets and method sheets ...

  • Regal Rexnord

    Machinist

    2 weeks ago

    Regal Rexnord New Hartford, United States Full time

    The Machinist will operate and adjust various pieces of equipment to perform any combination of machinery operations. Operators in this classification are required to read part prints, specifications, and sketches. They are also required to read operation sheets and method sheets ...

  • Monroe Staffing

    CNC Machinist

    3 days ago

    Monroe Staffing Manchester, United States

    Job type: Contract Town/City: manchester State: CT Salary/Rate: $ $36 per hour Business Sector: Light Industrial/Manufacturing Job ref: VT Post Date: May 31, 2024 CNC Machinists CNC Machinist Summary Summary : Small family owned company located in Manchester, CT, looking for a CN ...

  • A.R. Mazzotta

    CNC Milling

    1 week ago

    A.R. Mazzotta Hartford, United States

    Job Description · Job DescriptionApply Now Experienced CNC Milling and Lathes Machinist needed. Are you a skilled CNC Milling or CNC Lathes Machinist seeking a fresh start in the new season? Look no further Join our client's dynamic team at a well-established manufacturing compan ...

  • Exact Engineering, LLC

    CNC Programmer Machinist

    4 weeks ago

    Exact Engineering, LLC Newington, United States

    Job Description · Job DescriptionWe have an immediate position for a CNC Programmer/machinist for direct employment. This position will provide a varied and unique experience it requires both machining and precision assembly of inhouse designed and on 3-axis, 4-axis and 5-axis mi ...

  • Aerotek

    CNC Machinist

    1 week ago

    Aerotek Newington, United States

    **Description: Great company, great pay and benefits**Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, ...

  • Aerotek

    CNC Machinist

    1 week ago

    Aerotek Newington, United States

    **Description: Great company, great pay and benefits** · Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connectic ...

  • Randstad

    Cnc machinist

    11 hours ago

    Randstad Newington, United States Full time

    We are seeking a CNC Machinist for a manufacturing company in CT. As a CNC Machinist, you will be responsible for operating computer numerically controlled (CNC) machinery to produce precision parts and instruments. Your role will involve interpreting technical drawings, setting ...

  • New England CNC Inc

    CNC Machinist

    3 weeks ago

    New England CNC Inc Hamden, United States

    Job Description · Job DescriptionNew England CNC Inc., A frontrunner in CNC machining is looking for an experienced CNC machinist for a full time position. · The Ideal candidate will be experienced in programming, setting up and inspecting parts made on both CNC lathes and mills. ...

  • Peter Paul Electronics Co., Inc.

    CNC Lathe Setup 2nd Shift

    5 days ago

    Peter Paul Electronics Co., Inc. Hartford, United States

    Job Description · Job DescriptionLocated in New Britain · Are you an experienced CNC Machinist looking for a challenge? Do you enjoy working in a fast-paced environment with a variety of projects and materials? Are you interested in developing your skills? We might have the right ...

  • Sheffield Pharmaceuticals

    Machinist

    3 weeks ago

    Sheffield Pharmaceuticals New London, United States

    Job Description · Job DescriptionMechanic/Machinist Position · Job Responsibilities: · Contribute to team effort by accomplishing repairs and maintenance tasks as needed · Troubleshoot and repair production equipment · Set up and operate manual lathes and milling machines · Progr ...

  • Aegis Worldwide

    CNC Machinist

    3 weeks ago

    Aegis Worldwide New Britain, United States

    Job Description · Job DescriptionMachinists Levels I, II, & III · Pay Range is $21-$32 per hour · First or Second Shift (Weekdays) or First Shift (Weekends) Available: · Aegis Worldwide is partnered with a major medical device manufacturing company located near the New Britain, C ...