- Health Insurance - Centurum provides insurance for employee and dependent in a comprehensive package. Coverage for vision care is included. This option is available on a cost-sharing basis.
- Dental Insurance - Available in conjunction with Health Insurance for an additional cost. Provides oral maintenance care for employee and dependent.
- Basic Life Insurance - Company provided benefit for all full-time employees.
- Supplemental Life Insurance - Optional life insurance coverage to employees at group rates.
- Dependant Life Insurance - Optional coverage for dependents at a group rate.
- Long Term Disability Insurance - Optional coverage available to employees at group rates.
- Vacation and Sick Leave - Leave accrual is determined by length of service.
- Holidays - The company observes ten paid holidays each year.
- Retirement 401(k) Plan - Centurum's corporate benefits package includes 401K with a company bi-weekly match and a year-end profit sharing company match for all eligible employees. Investments can be made into selected funds under this plan.
-
Calibration Technician
3 weeks ago
The Mice Groups, Inc. San Diego, United StatesWe are looking for a Electro-Mechanical Calibration Technician for a direct Manufacturing client. · Job Title: Electro-Mechanical Calibration Technician · Location: San Diego CA · Type: Fulltime Permanent · Primary Role: · The Calibration and Testing Technician plays a crucial r ...
-
Calibration Technician
2 weeks ago
Orbis Sibro, Inc. San Diego, United StatesCalibration Technician San Diego, CA $60,000-$80,000 Responsibilities: Conducts electric/electronic or physical/mechanical calibration and preventive maintenance on a wide variety of General Purpose Test Equipment (GPTE) and Automated Test Equipment Technician, Calibration, Techn ...
-
Calibration Technician
3 weeks ago
Orbis Inc San Diego, United StatesJob Description · Job DescriptionJOB LOCATION: San Diego, CA · Responsibilities: · Conducts electric/electronic or physical/mechanical calibration and preventive maintenance on a wide variety of General Purpose Test Equipment (GPTE) and Automated Test Equipment (ATE) in accordanc ...
-
Calibration Technician
2 weeks ago
Mice Groups San Diego, United StatesWe are currently looking for an experienced Electro-Mechanical Calibration Technician to join our team with one of our clients. I would like to tell you a bit more about this position and learn a few things about you, as well. · Title: Electro-Mechanical Calibration Technician · ...
-
Calibration Technician
3 weeks ago
Centurum San Diego, United StatesDUTIES AND RESPONSIBILITIESConducts electric/electronic or physical/mechanical calibration and preventive maintenance on a wide variety of General Purpose Test Equipment (GPTE) and Automated Test Equipment (ATE) in accordance with Navy calibration procedures.Understands and appli ...
-
Calibration Technician
2 weeks ago
Centurum San Diego, United States Full timeDUTIES AND RESPONSIBILITIES · Conducts electric/electronic or physical/mechanical calibration and preventive maintenance on a wide variety of General Purpose Test Equipment (GPTE) and Automated Test Equipment (ATE) in accordance with Navy calibration procedures. · Understands and ...
-
Calibration Technician
2 weeks ago
Centurum San Diego, United States**DUTIES AND RESPONSIBILITIES** · Conducts electric/electronic or physical/mechanical calibration and preventive maintenance on a wide variety of General Purpose Test Equipment (GPTE) and Automated Test Equipment (ATE) in accordance with Navy calibration procedures. · Understands ...
-
Calibration Technician
3 weeks ago
Techmatrix inc San Diego, United States**Job Title**: Calibration Technician II · **Location**: 10020 Pacific Mesa Blvd, San Diego, CA, USA, 92121 · **Duration**: 12 Months · **Responsibilities** · - Calibrate the inspection, measurement, and test equipment (IM&TE) · - Follow BD calibration procedures, industry standa ...
-
Calibration Technician
2 days ago
Binding Minds San Diego, United StatesRate of pay is ** · Shift: First · Area: Final Inspection · Regarding the 3 must, the worker should possess. · - Product Inspection experience. · - Experience performing visual inspections as per inspection procedures. · - Oriented to detail. · Responsible for the efficient and e ...
-
Calibration Technician
2 weeks ago
Diedre Moire Corp. Chula Vista, United StatesField Service - Lab Instruments - HPLC GC-MS LC-MS - Chula Vista, CA · Install, certify, and repair HPLC, GC-MS, LC-MS, and similar lab instrumentation systems. · *** Validate analytical systems utilizing Installation, Operational, and Performance Qualification documents. · *** P ...
-
Pipette Field Calibration Technician
2 weeks ago
Transcat, Inc. San Diego, United StatesOverview · Who we are- · Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees-in technical, consulting, operational, sales, finance, and corpo ...
-
Gauge Calibration Technician II
2 weeks ago
EPSILON SYSTEMS San Diego, United States Full timeEpsilon Systems Solutions, Inc. is seeking a full-time Gauge Calibration Technician II in San Diego, CA. · Job Summary: · To provide Test, Measurement, and Diagnostic Equipment (TMDE) Management Support. · Duties and Responsibilities · : · Assists in the managing of the TMDE prog ...
-
Quality Control Calibration Technician
1 week ago
US Tech Solutions San Diego, United StatesDuration: · 12 Months Contract (Possible Extension) · Must Haves: · Regarding the 3 must, the worker should possess · Experience working in Quality Control/Assurance. (Calibration Activities desirable). · GD&T (Geometric Dimensioning and Tolerancing) knowledge. · Experience in ...
-
Electro Mechanical Technician
3 weeks ago
TalentZök San Diego, United StatesElectromechanical Test & Calibration Engineer- TalentZok · OVERVIEW · Are you looking for a new career opportunity with an exciting company? Then we've got the right team for you In this role, you're responsible for the duties listed below. · Immediate opening for an Electrom ...
-
Field Service Technician
1 week ago
LE002 Flagship Facility Services LLC San Diego, United StatesDescription · We are looking for ONE (1) full-time service technician. This full-time position as a field service engineer requires you to perform on-site calibration and repairs in house or at our client's facility. The candidate will use their troubleshooting, repair and calib ...
-
RF Test Tuner Technician 2
4 days ago
Knowles Precision Devices San Diego, United States Full timeRF Test Tuner Technician 2 · A RF Test Tuner Technician 2 is an entry level position with no to limited experience in pre-tuning of RF Microwave filters. The RF Tuner Technician 2 will focus in the area of microwave circuit test, learning to perform the set-up, calibration, tun ...
-
Mechanical Engineering Technician II
2 weeks ago
Manpower San Diego San Diego, United StatesThis person contributes to the completion of routine technical tasks and develops solutions to routine technical problems of specified scope. Their contacts are primarily with immediate supervisor, project leaders, and other professionals in the unit. · Duties and Responsibilitie ...
-
Pipette Calibration Specialist
2 weeks ago
Eppendorf SE San Diego, United States Full timeYour challengesResponsible for hands on mechanical cleaning, assembly or maintenance, and calibration of low complexity, small mechanical devices · Follow written test procedures, protocols, and documentation to ensure compliance and conformance to established specifications and ...
-
Technician, 1st Shift
5 days ago
AMETEK San Diego, United StatesAMETEK Programmable Power designs, manufactures and markets precision, AC and DC programmable power supplies, electronic loads, application specific power subsystems, and compliance test solutions for customers requiring & valuing differentiated power products and services. · Job ...
-
Mobile Automotive Mechanic
2 weeks ago
Wrench, Inc. San Diego, United StatesJob Type Full-timeDescriptionWHO WE AREFounded in 2016, Wrench is the fastest-growing, venture-backed automotive technology startup with a mission of removing the hassle around vehicle ownership. Our mobile-first automotive solutions span the vehicle lifecycle, ranging from pre-p ...
Calibration Technician - San Diego, United States - Centurum
Description
Job Description
Job DescriptionDUTIES AND RESPONSIBILITIES
Conducts electric/electronic or physical/mechanical calibration and preventive maintenance on a wide variety of General Purpose Test Equipment (GPTE) and Automated Test Equipment (ATE) in accordance with Navy calibration procedures.
Understands and applies uncertainties to measurements made.
Maintains calibration standards.
Follows written Quality Manual and Standard Operating Procedures (SOPs). Performs quality assignments such as 5S ("sort", "set in order", "shine", "standardize" and "sustain").
Performs calibration work with little to no supervision.
Researches requirements, technical documentation, parts, and obsolescence alternatives as necessary.
Conducts calibration work at customer sites (if applicable) with little to no direction.
Maintains lab compliance with external specifications, standards, and regulations.
Continues to develop working knowledge of all operating standards, practices, and procedures, including safety procedures.
Performs other duties as required.
REQUIRED SKILLS/YEARS OF EXPERIENCE
3 years of relevant experience in calibration, troubleshooting, maintenance, and repair of GPTE and calibration standards.
Relevant experience with ISO 17025, Joint Naval Audit Certification, Navy quality control, or similar. ISO 9001:2015 experience or equivalent is a plus.
Must be able to learn new skills in regard to calibration and processes.
Working knowledge and experience with basic hand tools and electronic tools.
Above average organizational and time management skills.
Requires Basic Electrical and Electronics formal education.
Requires Formal Calibration Education. Any of these classifications:
Navy NEC: 6673, 6718, I25A, I31A, 719B, 95AA, 1589, 729A, 4675, 765A.
Marine MOS Codes: 2871, 2874, 6492. Army MOS: 35H, 94H.
Air Force AFSCs: 2P031, 2P051.
ASQ Calibration Technician Certification.
Education: High School
Travel Required: 0%
Work Location: San Diego, CA
This position is required to have and maintain a Secret US DoD security clearance.
PREFERRED SKILLS
Highly desirable:
Precision Measurement Equipment Laboratory (PMEL)
Precision Measurement Equipment (PME)
Test, Measurement, and Diagnostic Equipment (TMDE)
American Society for Quality (ASQ) Certified Calibration Technician (CCT)
Metrology and Calibration (METCAL)
General Purpose Test Equipment (GPTE)
Experience with Navy's METBENCH Calibration Management System (MCMS) and Race is a plus.
REMARKS
Must be able to communicate effectively in English, both verbally and in writing.
Must possess basic math skills and be proficient with Microsoft Office products.
Must be able to interface effectively with all levels of technical and management personnel.
Compensation: $ $44.29 an hour.
Compensation for positions at Centurum vary depending on a wide range of factors including, but not limited to, location, responsibilities, skill set, and level of experience.
EOE M/F/Disability/Veteran
***When responding to this posting please reference job # SD24-57, Calibration Technician Depot***
Benefits
Full-time employees are eligible for the following benefits enrollment from their date of hire:
Centurum is an Equal Opportunity Employer, providing employment opportunities for all persons without discrimination on the basis of race, color, religion, sex, sexual orientation, national origin, age, disability, marital status, citizenship or any other characteristic protected by U.S. law. Centurum makes reasonable accommodations for persons with disabilities.
Powered by JazzHR
yxXcSMAUaO