Controls Technician III - Andover - MANTIS INNOVATION

    MANTIS INNOVATION
    MANTIS INNOVATION Andover

    5 hours ago

    $60,000 - $90,000 (USD) per year *
    Description

    Mantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility-inside and out-and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation.
    ***This job is NOT located in Houston, TX***
    As a Controls Tech II and/or III on our team, you will be responsible for installing and servicing Building Automation Systems, including project start-up, commissioning, routine and emergency service, and preventive maintenance.
    ***This role will require 100% permanent relocation to one of the following locations ASAP:
    Atlanta, GA
    Ashburn, VA
    San Diego, CA
    Seattle, WA
    Lubbock, TX
    Starting around March 2026 we will need people in:
    Oregon (city TBD)
    If you are not open to relocating to one of the areas above, please still apply as we might have other positions that open later with more flexible location options.
    MUST HAVE:
    At least 3+ strong years of hands-on experience with BMS software, Tridium Niagara is required and also able to understand wire sheet programming and logic.
    Responsibilities

    • Service of existing building control systems.
    • Startupof complete building control systems.
    • Install building control components(controllers, panels, conduit, sensors, etc.)
    • Low voltage control panel building.
    • Work closely with our installation subcontractors and coordinate work with them to ensure projects are completed on time as per code, standards and contract requirements.
    • Perform a point-to-point checkout per standard procedures.
    • Perform software/hardware calibration required for proper equipment and system operation.
    • Perform low voltage cable installation/termination for small projects if needed.
    • Take on project commissioning activities to include daily meetings and documenting results.
    Qualifications
    • At least 3+ strong years of hands-on experience with BMS software, Tridium Niagara is required and also able to understand wire sheet programming and logic.
    • Ability to own a task from beginning to end. Effectively communicating progress and/or issues about assigned task.
    • Can work both independently and as a part of a team.
    • Must be able to multi-task, it is very probable you will be assigned multiple tasks over multiple customers at any given time.
    • Basic proficiency in Microsoft suite (Word, Outlook, Visio, Excel, PowerPoint)
    • Can read schematics (network topologies, electrical one-lines, device wiring drawings, control drawings, etc...)
    • Familiarity with CAD, construction drawings
    • Strong understanding of open protocols (For Example... BACnet IP/BACnet MSTP/Modbus TCP/Modbus RTU)
    • Knowledge of terminating wire to terminal blocks to include RS-232, RS-485 and CAT 5/6
    • Troubleshooting skills, the ability to understand a problem and work toward reasonable solutions
    • Maintain proper understandings of code requirements for indoor and outdoor electrical infrastructure, and knowledge of handling higher voltage (120, 240, 480V) for controls purposes
    • Basic networking, ability to manipulate pc settings to access, set up and commission devices on a network.
    • Ability to visit job construction hard hat areas and climb stairs, climb ladders, maneuver in and around pipework and air ducts and work safely near exposed line voltage and low voltage wiring and terminations.
    • Possess valid state motor vehicle license and possess safe driving record as required by company's insurance carrier.
    • Able to pass State and Federal security screening.
    • Out-of-state travel will be required (estimated to be between 25% - 30% throughout the year)
    • Understanding of Mechanical and Electrical equipment in a typical Data Center application
    $140,000 - $180,000 a year
    *The above pay range is Total Cash; a combination of base salary (dependent upon experience/Tech level) and additional bonus potential through internal programs (annual bonus, living expenses, profit sharing)
    This role is open to and may offer additional compensation in the form of relocation assistance to candidates willing to relocate permanently
    Note: Employees are held accountable for all duties of this job. This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position.
    What else can we offer you?
    We offer a fantastic lineup of benefits, including Medical, Dental, Vision, FSA, HSA, 401k Matching, Paid Vacation, Paid Sick, Paid Holidays, Paid Parental Leave, Paid Short Term & Long Term Disability, Tuition Reimbursement, and a flexible hybrid work schedule (for office-based employees). Working at Mantis also brings tremendous professional development opportunities that allow you to make a real impact on both the company and your career
    Not sure you meet every single requirement?
    Studies show that women and individuals from underrepresented groups often hesitate to apply unless they check every box. At Mantis, we're committed to building an inclusive and equitable team-so if this role excites you, we'd love to hear from you, even if your experience doesn't match every single qualification.
    Mantis Innovation is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.
    * This salary range is an estimation made by beBee
  • Work in company

    Technician III

    Only for registered members

    +We are seeking highly motivated individuals to join our Minneapolis Prototype Network team as Electro-Mechanical Technicians.We are a leading Defense contractor and our mission is to create next generation sustainable solutions for the most complex problems. · ++Fabricates and b ...

    Maple Grove

    1 month ago

  • Work in company

    Quality Technician III

    Only for registered members

    We anticipate the application window for this opening will close on - 27 Feb 2026 · At Medtronic you can begin a life-long career of exploration and innovation, while helping champion healthcare access and equity for all. You'll lead with purpose, breaking down barriers to inno ...

    Fridley, MN $52,000 - $78,000 (USD) per year

    1 week ago

  • Work in company

    Technician III

    Only for registered members

    We are seeking highly motivated individuals to join our Minneapolis Prototype Network team as Electro-Mechanical Technicians. As a member of our Minneapolis Prototype Network team, you will focus on supporting our design engineering team from concept to realization; fabricating, ...

    Maple Grove

    2 months ago

  • Work in company

    Maintenance Technician III

    Only for registered members

    Perform skilled maintenance and repair work on production equipment and facilities to ensure optimal performance and functionality.This position will require knowledge in hydraulics, pneumatics, electrical, and industrial mechanics. · ...

    Mounds View $31.67 - $47.52 (USD)

    1 month ago

  • Work in company

    Technician III

    Only for registered members

    We are seeking skilled technicians to join our production team in Automation division.We focus on accuracy, quality and resourcefulness and seek diverse people for our teams. · ...

    Shoreview $30 - $36 (USD)

    1 month ago

  • Work in company

    Technician III

    Only for registered members

    We are seeking a skilled Technician to join our Production team in our Automation division. The successful candidate will have experience in building robotics, laser systems, and vision systems within complex automated systems. · ...

    Shoreview $30 - $36 (USD) Full time

    2 months ago

  • Work in company

    Technician III

    Only for registered members

    +Job Summary · Performs a variety of duties in the electronic, mechanical, electromechanical, · & optical areas. · +Responsibilities · ...

    Minneapolis

    1 month ago

  • Work in company

    Technician III

    Only for registered members

    +Job summary · Our Technicians are builders of technology that brings innovation to life.Our focus on accuracy, quality, and resourcefulness extends beyond our products,+ · +,+Global team recognized for their passion of inventing,+First-of-a-kind product culture and project expos ...

    Shoreview $30 - $36 (USD)

    2 weeks ago

  • Work in company

    Facility Technician III

    Only for registered members

    Company:   · US0047 Sysco Minnesota, Inc.Sales Territory:   · NoneZip Code: · 55112Travel Percentage:   · 0Compensation Range: · $ $41.88The compensation range provided is in compliance with state specific laws.  Factors that may be used to determine your actual rate of pay incl ...

    Minnesota, United States $27.93 - $41.88 (USD) Full time

    1 week ago

  • Work in company

    Technician III

    Only for registered members

    We are seeking a skilled Technician III to join our Production team in our Automation division. The successful candidate will have experience in building robotics, laser systems or vision systems within complex automated systems and be able to read and interpret engineering docum ...

    Shoreview, MN

    1 month ago

  • Work in company

    Technician III

    Only for registered members

    We are seeking highly motivated individuals to join our Minneapolis Prototype Network team as Electro-Mechanical Technicians. · Provides direct support to design engineering through the entire product development life cycle. · ...

    Maple Grove, MN

    2 months ago

  • Work in company

    Quality Technician III

    Only for registered members

    · Additional Location(s):  N/A · Diversity - Innovation - Caring - Global Collaboration - Winning Spirit - High Performance · At Boston Scientific, we'll give you the opportunity to harness all that's within you by working in teams of diverse and high-performing employees, tackl ...

    Minnesota, United States $52,000 - $78,000 (USD) per year

    6 days ago

  • Work in company

    Quality Technician III

    Only for registered members

    At Medtronic you can begin a life-long career of exploration and innovation while helping champion healthcare access and equity for all. · A Day in the Life · At Medtronic we bring bold ideas forward with speed and decisiveness to put patients first in everything we do.We lead gl ...

    Fridley $52,800 - $79,200 (USD)

    2 weeks ago

  • Work in company

    Calibration Technician III

    Only for registered members

    We anticipate the application window for this opening will close on - 7 Mar 2026At Medtronic you can begin a life-long career of exploration and innovation, while helping champion healthcare access and equity for all. You'll lead with purpose, breaking down barriers to innovation ...

    Mounds View $59,600 - $89,400 (USD) Full time

    6 days ago

  • Work in company

    Facility Technician III

    Only for registered members

    Pay: up to $38.00 per hour, based on experience; with the opportunity to move up to low $40's · 1st Shift Differential · $600 Annual Tool Allowance · Annual Boot Allowance · Outstanding benefits: · Excellent full-time career with a stable and growing company · Move your career F ...

    Mounds View $52,000 - $76,000 (USD) per year

    6 days ago

  • Work in company

    Quality Technician III

    Only for registered members

    We anticipate the application window for this opening will close on -26 Jan 2026 · At Medtronic you can begin a life-long career of exploration and innovation while helping champion healthcare access and equity for all You'll lead with purpose breaking down barriers to innovation ...

    Fridley, MN

    1 month ago

  • Work in company

    Calibration Technician III

    Only for registered members

    We anticipate the application window for this opening will close on - 7 Mar 2026 · At Medtronic you can begin a life-long career of exploration and innovation, while helping champion healthcare access and equity for all. You'll lead with purpose, breaking down barriers to innovat ...

    Mounds View $59,600 - $89,400 (USD)

    6 days ago

  • Work in company

    Quality Technician III

    Only for registered members

    We anticipate the application window for this opening will close on - 20 Feb 2026. At Medtronic you can begin a life-long career of exploration and innovation, while helping champion healthcare access and equity for all. · You'll lead with purpose, breaking down barriers to innov ...

    Fridley $52,800 - $79,200 (USD)

    2 weeks ago

  • Work in company

    Quality Technician III

    Only for registered members

    We anticipate the application window for this opening will close on - · 16 Feb 2026You’ll lead with purpose, breaking down barriers to innovation in a more connected, compassionate world. · A Day in the Life · At Medtronic , we bring bold ideas forward with speed and decisivenes ...

    Fridley $52,800 - $79,200 (USD)

    1 month ago

  • Work in company

    Quality Technician III

    Only for registered members

    We anticipate the application window for this opening will close on - 16 Feb 2026. · You'll lead with purpose, breaking down barriers to innovation in a more connected, compassionate world. · ...

    Fridley, MN

    1 month ago

  • Work in company

    Quality Technician III

    Only for registered members

    We anticipate the application window for this opening will close on - 26 Jan 2026At Medtronic you can begin a life-long career of exploration and innovation, while helping champion healthcare access and equity for all. · You'll lead with purpose, breaking down barriers to innovat ...

    Fridley $52,800 - $79,200 (USD)

    1 month ago

Jobs
>
Controls technician iii
>
Jobs for Controls technician iii in Andover