No more applications are being accepted for this job
- Establish policies to ensure programs align with organizational goals and objectives.
- Develop project requirements to adhere with regulatory guidance.
- Deliver briefings on engineering programs to higher headquarters.
- Manage the command's construction planning programs for the sustainment command.
- Develop reports to provide management with cost estimates and cost justification for engineering programs
- Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
- This position requires the incumbent be able to obtain and maintain a determination of eligibility for a Secret security clearance or access for the duration of employment.
- Appointment to this position is subject to a one-year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 315.
- This position has a Temporary Duty (TDY) or business travel requirement of 25% of the time.
- This position requires the incumbent be able to obtain and maintain a determination of eligibility for a Secret security clearance or access for the duration of employment
- Current Department of Army Civilian Employees
- Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce
- Land Management Workforce Flexibility Act
- Military Spouses, under Executive Order (E.O
- Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
- Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
- Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
- Priority Placement Program, DoD Retained Grade Preference Eligible
- Veterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education or experience requirements described below
- Organizational Awareness
- Planning and Evaluating
- Technical Competence Time in
- Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
- You will be required to provide proof of U.S
- One year trial/probationary period may be required.
- Direct deposit of pay is required.
- Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
- If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
- This is a(n) Engineers and Scientists (Non-construction) Career Field position.
- Multiple positions may be filled from this announcement.
- Salary includes applicable locality pay or Local Market Supplement.
- Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
- Benefits Help A career with the U.S
General Engineer with Security Clearance - fort cavazos, TX, United States - Department of Defense
Description
DutiesQualifications Who May Apply:
Only applicants who meet one of the employment authority categories below are eligible to apply for this job
You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected
See Proof of Eligibility for an extensive list of document requirements for all employment authorities.
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g.
, professional; philanthropic; religious; spiritual; community; student; social)You will receive credit for all qualifying experience, including volunteer experience
Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application
Additional information about transcripts is in this document
Basic Requirement for General Engineer:
A
Degree:
Bachelor's degree (or higher degree) in engineering
To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics
OR B
Combination of Education and Experience:
College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering
The adequacy of such background must be demonstrated by one of the following: 1
Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico
Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration
For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions
2
Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico
3
Specified academic course s - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above
The courses must be fully acceptable toward meeting the requirements of an engineering program
4
Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance
Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g.
, in interdisciplinary positionsIn addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
Specialized Experience:
One year of specialized experience which includes 1) Developing engineering master plans for the organization 2) Reviewing engineering plans to ensure regulatory requirements are met, 3) Preparing project documentation to acquire project approval and funding, and 4) Advising leadership on facility standards
This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-12)
You will be evaluated on the basis of your level of competency in the following areas:
Grade Requirement:
Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12)
Education
FOREIGN EDUCATION:
If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.
Seducation program; or full credit has been given for the courses at a U.S
accredited college or university
For further information, visit:
Additional information
As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding
Opens in a new window Learn more about federal benefits
Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent
Contact the hiring agency for more information on the specific benefits offered
How You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications above
Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement
If you are minimally qualified, your resume and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience
If, after reviewing your resume and/or supporting docum