Civil Engineer - El Portal, United States - U.S. Department of the Interior

Description

Clarification from the agency

Applications will be accepted from any U.S. Citizen. DIRECT HIRING AUTHORITY will be used to fill this position.

Duties

Major Duties include:

Provides or manages project scoping, data and asset management, design phases (pre-design, schematic design, design development, construction documents), value analysis, and administration for a broad range of facilities and related maintenance operations, including construction, rehabilitation, and renovation and re-purposing.

Work may include, but is not limited to, the following type of structures or facilities: campsites, visitor centers, lodging, employee housing, potable water systems, wastewater systems, communication systems, roads, bridges, trails, parking, bus facilities, transportation systems, administrative structures as well as meeting budget and schedule requirements.

Work includes multiple simultaneous projects, ranging from small, single-discipline to large multi-disciplinary design and construction projects involving both single and multiple-year phasing, potentially funded from multiple funding sources and the employee will encounter work components requiring creative solutions that balance cultural and natural resource compliance issues and/or politically sensitive issues.

Provides professional guidance based on understanding of major principles and industry standards.

Performs contracting officer's representative duties for AE services and construction contracts. Serve as contracting officer's technical representative on construction projects.

Yosemite National Park, California, known worldwide for its spectacular natural beauty is the backdrop for this position. Sitting astride the Sierra Nevada Mountains, the park covers 1,182 square miles of varied wilderness ecosystems, from river valleys to alpine meadows to lofty 13,000 foot high peaks. Yosemite Valley is located 208 miles from San Francisco, 81 miles from Merced, and 94 miles from Fresno. Shopping, medical, postal and laundry services are available in the park. Elevation at the Valley floor is approximately 4,000 feet and 2,200 feet in El Portal. The park is open year-round with the majority of activities occurring during the busy season March through October. For more information, visit: .

Requirements

Conditions of Employment

U.S. Citizenship required.

Appointment subject to background investigation and favorable adjudication.

Meet Selective Service Registration Act requirement for males.

Selectee will be required to participate in the Direct Deposit Electronics Funds Transfer Program.

You will be required to operate a government (or private) motor vehicle as part of your official duties; a valid driver's license is required. You will be required to submit a Motor Vehicle Operator's License and Driving Record. You must also submit (within a State sealed envelope or submitted directly by the State authorities), and at your own expense, all certified driving records from all States that disclose all valid driver's licenses, whether current or past, possessed by you.

You will be required to wear a uniform and comply with the National Park Service uniform standards. A uniform allowance will be provided.

Overtime may be required.

If you are a new employee in the Federal government, you will be required to complete a one-year probationary period.

You may be required to travel overnight away from home up to 2 nights per month. You must obtain a government charge card for travel purposes.

You may be required to complete training and obtain/maintain a government charge card with travel and/or purchase authority.

You will be required to complete a Confidential Financial Disclosure Report, OGE-450 on an annual basis.

Qualifications

All qualifications must be met by the closing date of this announcement-05/09/2024-unless otherwise stated in this vacancy announcement.

Credit will be given for all appropriate qualifying experience. To receive credit for experience, your resume MUST clearly indicate the nature of the duties and responsibilities for each position, starting and ending dates of employment (month/year), and the resume must reflect full and/or part-time or total number of hours worked (i.e., work 40+ hours a week, rather than indicating full-time). If part-time, the hours must be annotated to be able to pro-rate the amount qualified specialized experience.

To qualify, you must meet following BASIC EDUCATION AND SPECIALIZED EXPERIENCE requirements:

BASIC EDUCATION: You must meet one of the following:

You must possess a degree in professional engineering. To be acceptable, the program must: (1) lead to a Bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. YOU MUST INCLUDE TRANSCRIPTS.

-OR-

Possess a combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by ONE of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. YOU MUST INCLUDE TRANSCRIPTS.

-AND-

SPECIALIZED EXPERIENCE: At least one year of professional engineering experience equivalent to at least the GS-11 grade level in the Federal service which required use of professional engineering expertise to perform the following types of duties: serving as a senior staff specialist performing civil engineering work in design and construction programs for utilities, buildings, facilities, structures, roads, etc.; design, preparation and review of project plans, specifications and scopes of work; establish inspection requirements and perform site surveys/inspections; project management and providing engineering expertise and technical guidance on relevant topics. You must include hours per week worked on your resume.

There is no substitution of education for experience at the GS-12 grade level of this announcement.

Volunteer Experience: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

CTAP/ICTAP Statement: Current surplus and current or former displaced Federal individuals who have special priority selection rights under the Agency Career Transition Assistance Program (CTAP) or the Interagency Career Transition Assistance Program (ICTAP) must be well qualified for the position to receive consideration for special priority selection. Well qualified means that the applicant meets the following: OPM qualification standards for the position; all selective placement factors, where applicable; special qualifying conditions that OPM has approved for the position, where applicable; is physically qualified with reasonable accommodation, where appropriate to satisfactorily perform the duties of the position upon entry; and is rated by the organization at least at the well qualified level on all competencies. Federal employees seeking CTAP/ICTAP eligibility must submit proof that they meet the requirements of 5 CFR for CTAP and 5 CFR for ICTAP. This includes a copy of the agency notice, a copy of their most recent Performance Rating, and a copy of their most recent SF-50 noting current position, grade level, and duty location.

Education

To qualify based on education, you must submit a legible copy of transcripts from an with your name, school name, credit hours, course level, major(s), and grade-point average or class ranking. Transcripts do not need to be official, but if you are selected for this position and you used your education to qualify, you must provide official transcripts before you begin work.

If you are using to meet qualification requirements, you must show that your education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university.