- Responsible for preparing parts and materials per company's welding procedure to insure proper welding of the materials.
- Analyzes engineering drawings and specifications to plan layout, fit up, and welding operations of structures.
- Skilled in the use of measuring tools or instruments, as provided and appropriate, to assure accuracy in dimensions of work in process.
- Must be able to work for sustained periods of time in the standing position, be capable of reading, comprehending and complying with Work Instruction Process Sheets and Blueprints.
- Must have a working knowledge of welding equipment controls for both processing and safety.
- Must be able to effectively utilize fixtures, jigs, grinders and clamps, as provided for effective positioning, holding and material preparation of parts to be welded.
- Weld correct weld procedure as instructed on drawing.
- Must be able to hold all dimensions on drawing within tolerances, ensure parts are straight and square when completed, allow for shrinkage control, prepare parts and material as required.
- Must maintain a clean and safe work environment by following all safety regulations.
- Basic Math (add, subtract, multiply, and divide)
- Read and comprehend written material, and be able to understand and follow verbal instructions.
- Lift and carry up to 32 lbs.
- Ability to bending, stooping, twisting, reaching, turning, and pushing/pulling of heavy parts, standing or walking 80% of the time, ability to see with or without corrective lenses.
- Willing and able to work overtime as business needs arise.
- Able to obtain and maintain a DoD Clearance.
- Requires fully proficient job knowledge/skills typically obtained through a combination of education and experience.
- Requires a High School Diploma or equivalent and a minimum of six (6) years of prior welding experience
- 2 years post-Secondary/Associates Degree with a minimum of two (2) years of prior welding experience.
- Must qualify to weld in accordance with the Inert-Gas Shielded Metal Arc Process (TIG) for aluminum, and/or (MIG/TIG) Mild and/or Stainless Steel as required to support specific product lines.
- Must be capable of qualifying and welding in accordance with company standards, and Military standards S9074-AR-GIB-101/278 and MIL-STD-22D.
- Must be a U.S. Citizen
- Experience with shop floor control along continuous improvement exposure.
-
Welder
2 weeks ago
L3Harris Technologies Tulsa, United StatesThe Welder is responsible for planning work and layouts, setting-up and welding/fabricating a wide variety of intricate, experimental and/or production sheet metal parts and final assemblies from raw material. Essential Functions:Responsible for prep Welder, Welding, Sheet Metal, ...
-
Welder
3 weeks ago
ASSA ABLOY Tulsa, United States Full timeWelder · Ameristar Perimeter Security USA, an ASSA ABLOY branded company, is looking for a Welder. · What you will be doing: This position will accurately weld gates and parts to dimensional drawings using mig and flux cored processes. · The skills and experience you need:High ...
-
Welder
1 week ago
Tradesmen International Tulsa, United StatesTradesmen International - JobID: 24CE6B6DDDCF482F9D1B FE03 [Fabricator] As a Welder at Tradesmen International, you'll: Read blueprints and other engineering drawings in order to perform efficiently; Read and interrupt technical manuals as applicable; Demonstrate knowledge of var ...
-
Welder
2 weeks ago
Trinity Employment Specialists Tulsa, United StatesStructural Welder · 1st shift M-F (currently 6:00 am-4:30 pm), some Saturdays (hours are usually 7:00 am - 3:00 pm M-F) · Temp to Hire · $20-$23 per hour DOE · Busy Tulsa job shop is seeking a great structural welder to join their team. · Steel toed boots required · Must be ...
-
Welder
1 day ago
ASSA ABLOY Tulsa, United StatesCareer Opportunities: Welder · Requisition ID Posted - Ameristar Perimeter Security USA Inc. - Perimeter Security Segment - USA: Oklahoma (Tulsa N Mingo Rd) - Production & Skilled Trades - Posting Country (1) - Yes - Associate - No Travel Required · ? Job Description Print Prev ...
-
Welder
2 weeks ago
Trinity Employment Specialists Tulsa, United StatesStructural Welder · 1st shift M-F (currently 6:00 am-4:30 pm), some Saturdays (hours are usually 7:00 am - 3:00 pm M-F) · Temp to Hire · $20-$23 per hour DOE · Busy Tulsa job shop is seeking a great structural welder to join their team. · Steel toed boots required · Must be able ...
-
Welder
1 week ago
L3 Harris Tulsa, United StatesJob Title: Welder C · Job Code: 10904 · Job Location: Tulsa, OK (On-Site) · Job Schedule: 1st Shift 9/80 · Job Description: · The Welder is responsible for planning work and layouts, setting-up and welding/fabricating a wide variety of intricate, experimental and/or production sh ...
-
Welder
2 weeks ago
Waste Management Tulsa, United StatesWaste Management, Inc. - JobID: [Fabricator] As a Welder at Waste Management, Inc., you'll: Apply appropriate welds to fabricate or repair compactors, containers and carts; Perform minor repairs and apply basic welding processes; Repair compactors, containers and carts; Perform p ...
-
Welder
3 weeks ago
AMETEK Tulsa, United StatesPosition Summary: · AMETEK MRO is seeking an experienced Tig welder to fabricate and assemble parts through the use of welders, cutters, shapers, and measuring tools. The preferred candidate will have experience welding aluminum. · Essential Duties & Responsibilities: TIG weld ...
-
Welder
5 days ago
ASSA ABLOY Tulsa, United StatesWelder · Ameristar Perimeter Security USA, an ASSA ABLOY branded company, is looking for a Welder. This is a 1st shift position. · What you will be doing: This position will accurately weld gates and parts to dimensional drawings using mig and flux cored processes. · The skill ...
-
Welder
3 weeks ago
BuildSubmarines Tulsa, United StatesPosition Summary: · AMETEK MRO is seeking an experienced Tig welder to fabricate and assemble parts through the use of welders, cutters, shapers, and measuring tools. The preferred candidate will have experience welding aluminum. · Essential Duties & Responsibilities: · TIG we ...
-
Welder
3 weeks ago
AMETEK Tulsa, United StatesPosition Summary:AMETEK MRO is seeking an experienced Tig welder to fabricate and assemble parts through the use of welders, cutters, shapers, and measuring tools. The preferred candidate will have experience welding aluminum.Essential Duties & Responsibilities: TIG weld thin gau ...
-
Welder
3 weeks ago
Aerotek Tulsa, United States**Welder****$21-32 / HR | Tulsa, OK****_Overview:_**+ Contract to hire opportunity with a well known manufacturing company.+ Opportunity for growth & advancement.**_Responsibilities:_**+ Weld components for industrial heat exchangers.+ Complete various fabrication tasks.+ Read & ...
-
Welder
1 week ago
ASSA ABLOY Tulsa, United StatesWelderAmeristar Perimeter Security USA, an ASSA ABLOY branded company, is looking for a Welder. This is a 1st shift position.What you will be doing: This position will accurately weld gates and parts to dimensional drawings using mig and flux cored processes.The skills and experi ...
-
Welders
1 week ago
Quality Machine & Fab Tulsa, United StatesJob Description · Job DescriptionSeeking skilled Welders. Fitting experience is preferred. Seeking Structural, Pipe & Vessel Welders, Mig & Flux, Tig on stainless and aluminum. · ...
-
Welder
2 weeks ago
ASSA ABLOY Tulsa, United StatesWelderAmeristar Perimeter Security USA, an ASSA ABLOY branded company, is looking for a Welder. What you will be doing: This position will accurately weld gates and parts to dimensional drawings using mig and flux cored processes. · The skills and experience you need: High School ...
-
Welder
1 week ago
Key People Key Positions Tulsa, United StatesJob Description · Job DescriptionPay: $24.00/hr + DOE Hours: Weekend Shift – Friday – Sunday 4:30 AM – 5:00 Pm ($5 shift differential)West TulsaWelder · The company is seeking a Welder II who will require to perform procedural tasks under general supervision, and complex tasks in ...
-
Welder
1 week ago
Abundant Solutions Tulsa, United StatesJob Description · Job DescriptionNorth Tulsa Manufacturing Company is seeking a Welder ASAP Responsibilities & Duties:Fits, and welds carbon steel and galvanneal components to assemble structural forms (truck bodies/bumpers) · Lays out, positions, aligns, and fits components toge ...
-
Welder
5 days ago
Valmont Industries Tulsa, United States801 N Xanthus Tulsa Oklahoma Why ValmontWe're Here to Move the World Forward.Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable ener ...
-
Welder
2 weeks ago
Assa Abloy Tulsa, United StatesWelderAmeristar Perimeter Security USA, an ASSA ABLOY branded company, is looking for a Welder. What you will be doing: This position will accurately weld gates and parts to dimensional drawings using mig and flux cored processes. · The skills and experience you need: High School ...
Welder - Tulsa, United States - L3 Harris
Description
Job Description
Job Title: Welder CJob Code: 10904
Job Location: Tulsa, OK (On-Site)
Job Schedule: 1st Shift 9/80
Job Description:
The Welder is responsible for planning work and layouts, setting-up and welding/fabricating a wide variety of intricate, experimental and/or production sheet metal parts and final assemblies from raw material.
Essential Functions:
#LI-AH1
