- Responsible for assisting unloading and loading of trucks, vans, flatbeds, forklift etc.
- Handling of material and product within the saw area and throughout the manufacturing departments as required.
- Manually or using hand truck, forklift, to perform various material handling duties in the facility.
- Load and stage raw bar and tube stock for tube lasers and saw area.
- Stack skids or pallets in designated areas. Clean up and dispose of scrap bracing, cardboard, and strapping and place in proper containers or designated areas.
- Use tools such as hammers, and crowbars to remove strapping, open crates, strap cars.
- Stage and store WIP in the fabrication area to keep material flow and organization by dates and locations.
- Work with Leads, techs, and supervisor to stage materials for daily production through the saw area.
- Cycle count raw bar, and round stock, tubes and angle and assist stockroom on raw material counts and assessment of damaged and deteriorated materials.
- Use scanning equipment to track material moves.
- Manually lift materials up to 50lbs. and utilize hoist, straps, and forklifts to move raw stock up to 24 ft in length.
- Use inspection equipment for quality assurance such as tape measure, square and calipers.
- Perform daily maintenance on saws up to and including changing saw blades, scrap and chip removal, filling of coolant and coolant storage tanks.
- Applicable training will be completed by following the syllabi (Human Resources, Safety, IFS - Timeclock, IFS - Navigation, ISO) for each new hire and that will be verified by the Employee Orientation & Job Qualification form within the first 60 days of employment.
- Applicable training will be completed by following the Press Room Training Matrix form (F The effectiveness of welding training guidelines will be determined by employee knowledge and demonstration of learned concepts. Additional training after the first several weeks of on-the-job training will be determined by the Supervisor in preparation to operate on their own as needed. Any follow-up training will be evaluated and provided at the 60-day review or as deemed necessary for the position.
-
2nd shift Saw Operator
3 weeks ago
Innovance Albert Lea, United StatesJob Description · Job DescriptionDescription:Innovance, Inc. · Innovance is the holding company for a family of four, 100% employee-owned, Minnesota-based manufacturing companies (Lou-Rich, ALMCO, Panels Plus, Mass Finishing). Our mission is to lead, nurture, and grow a team of i ...
-
2nd shift Saw Operator
4 weeks ago
Innovance Albert Lea, MN, United States: · Innovance, Inc. · Innovance is the holding company for a family of four, 100% employee-owned, Minnesota-based manufacturing companies (Lou-Rich, ALMCO, Panels Plus, Mass Finishing). Our mission is to lead, nurture, and grow a team of industrial manufacturing companies commi ...
-
2nd shift Saw Operator
2 days ago
Innovance Albert Lea, MN, United States Full time: Innovance, Inc. · Innovance is the holding company for a family of four, 100% employee-owned, Minnesota-based manufacturing companies (Lou-Rich, ALMCO, Panels Plus, Mass Finishing). Our mission is to lead, nurture, and grow a team of industrial manufacturing companies committ ...
-
2nd shift Saw Operator
3 weeks ago
Innovance Albert Lea, United States:Innovance, Inc. · Innovance is the holding company for a family of four, 100% employee-owned, Minnesota-based manufacturing companies (Lou-Rich, ALMCO, Panels Plus, Mass Finishing). Our mission is to lead, nurture, and grow a team of industrial manufacturing companies committed ...
-
2nd shift Saw Operator
2 days ago
Innovance Albert Lea, MN, United States Full timeInnovance is the holding company for a family of four, 100% employee-owned, Minnesota-based manufacturing companies (Lou-Rich, ALMCO, Panels Plus, Mass Finishing). Our mission is to lead, nurture, and grow a team of industrial manufacturing companies committed to making our OEM c ...
-
Training as a tool mechanic
1 week ago
Crimson Ventures Hollandale, United StatesAs one of the leading companies in Europe for furniture component fittings and technical wholesale, the family-owned company Paul Henke has been producing and developing plastic injection molding and zinc die-casting elements at the highest technical level since 1929, for custome ...
-
Wastewater Maintenance/Operator
4 days ago
City of Albert Lea, MN Albert Lea, United StatesSalary: $ $38.71 Hourly · Location : Albert Lea, MN · Job Type: Full-time · Job Number: 00086 · Department: Public Works · Division: Wastewater Treatment Plant · Opening Date: 05/24/2024 · Closing Date: 6/14/2024 11:59 PM Central · Description · General Statement of Dutie ...
-
Glass Tech
1 week ago
inSync Staffing Faribault, United States ContractPay rate: $21.00/hr · Hours: 5:45 am 2:15 pm , M-F · Location: Faribault, MN · Duration: 6 months · Summary:The Glass Technician assists with the fabrication of fire-rated Glass. · This includes but is not limited to operating a Cutting Table, Product Assembly via Glass Wash, Gla ...
-
Maintenance Technician
4 days ago
Balchem Faribault, United StatesPOSITION SUMMARY · : Installs, maintains, and repairs machinery, boilers, equipment, physical structures, and pipe and electrical systems by performing the following duties. Responsible for the operation of the boiler. Required to work towards First Class boilers license. Embrac ...
-
Foreperson (Driver License Required) - ATE
3 weeks ago
Asplundh Tree Expert, LLC - 163 Owatonna, United States Full timeEssential Functions · & Responsibilities: Plans, coordinates, and assigns daily work for the crew after receiving/interpreting orders from a General Foreperson/Line Clearance Supervisor. · Conduct field training/retraining, instructing crew on new or revised job units. · Promote ...
-
Transportation Worker I
2 weeks ago
State of North Carolina Hertford, United StatesSalary: $31, $52,813.00 AnnuallyLocation : Hertford County, NCJob Type: Permanent Full-TimeJob Number: Department: Dept of TransportationDivision: State Hwy Administrator - Div of HwysOpening Date: 04/22/2024Closing Date: 8/2/2024 11:59 PM EasternJob Class Title: Transportation W ...
-
Transportation Worker I
1 week ago
State of North Carolina Hertford, United StatesSalary: $31, $52,813.00 Annually · Location : Hertford County, NC · Job Type: Permanent Full-Time · Job Number: · Department: Dept of Transportation · Division: State Hwy Administrator - Div of Hwys · Opening Date: 04/22/2024 · Closing Date: 8/2/2024 11:59 PM Eastern · Jo ...
-
Full Time
3 weeks ago
Lowe's Glenville, United States Full timeEssential Functions: · NOTE: Minors in this role may not be responsible for some of the activities listed below · Assisted Self Check Out · * Demonstrates ability to monitor and identify customers who need assistance at multiple self-checkout registers simultaneously · * Appr ...
-
welder fabricator days
3 weeks ago
Spherion Austin, United StatesThe Welder Fabricator will perform the function of lay-out, fabricating and mig welding under minimum supervision.Perks & Benefits: Day Shift: 6:30AM-4PMHourly Wage: $24-$25.50/HR, depending on experienceDIRECT HIRE position (meaning you start working for this employer immediatel ...
-
welder fabricator days
21 hours ago
Spherion Austin, United StatesThe Welder Fabricator will perform the function of lay-out, fabricating and mig welding under minimum supervision. · Perks & Benefits: · Day Shift: 6:30AM-4PM · Hourly Wage: $24-$25.50/HR, depending on experience · DIRECT HIRE position (meaning you start working for this empl ...
-
Welder, Fabrication
1 day ago
Spherion Staffing Austin, MN, United States Full timeThe Welder Fabricator will perform the function of lay-out, fabricating and mig welding under minimum supervision. · *Perks & Benefits* · * Day Shift: M-TH 6:30AM-4PM, FRI 6:30-10:30AM · * Hourly Wage: $24-$25.50/HR, depending on experience · * DIRECT HIRE position (meaning yo ...
-
Metal Machine Operator
3 weeks ago
Wenger Corporation Owatonna, United StatesJob Details · Job Location Corporate Headquarters - Owatonna, MN Travel Percentage None Job Shift M - W 3:25pm - 3:35am, Th 3:25pm - 9:05p Description · Wenger Corporation is a privately-held, leading manufacturer of high-quality music education, performing arts and athletic pr ...
-
Metal Machine Operator
3 weeks ago
Wenger Corporation Owatonna, United StatesJob Details · Job Location · Corporate Headquarters - Owatonna, MN · Travel Percentage · None · Job Shift · Monday - Thursday, 5am - 3:30pm · Description · Wenger Corporation is a privately-held, leading manufacturer of high-quality music education, performing arts and athl ...
-
welder
2 weeks ago
Wells Concrete Wells, United StatesJob Description · Job DescriptionWELLS: A CAREER WORTH BUILDING · Wells is one of the largest prefabricated building solution providers with locations across the central U.S., providing meaningful work in many different regions. We are a family-owned company that has celebrated 7 ...
-
Metal Machine Operator
3 weeks ago
Wenger Corporation Owatonna, United StatesSet up, adjustment, and operation of a variety of metal fabrication equipment including, but not limited to press brake, punch presses, tube benders, saws, and wire forming machines Following engineering drawings and blueprints to perform the work Ac Machine Operator, Metal, Lase ...
2nd shift Saw Operator - Albert Lea, United States - Innovance
Description
:Innovance, Inc.
Innovance is the holding company for a family of four, 100% employee-owned, Minnesota-based manufacturing companies (Lou-Rich, ALMCO, Panels Plus, Mass Finishing).
Our mission is to lead, nurture, and grow a team of industrial manufacturing companies committed to making our OEM customers' products better.
About Lou-RichLou-Rich is a fully integrated contract manufacturer specializing in complex projects.
We provide precision machining, metal fabrication, assembly, and sourcing solutions to a variety of industries, including some of North America's largest OEMs.
Companies of all sizes from Fortune 500 companies to small, fast-growing operations trust Lou-Rich with their most vital and complex manufacturing projects.
Position Description:
Move materials, raw steel, supplies and finished goods on and off saw beds, racks, and to designated places within the facility.
Essential Functions:
OTHER DUTIES
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job.
Duties, responsibilities, and activities may change at any time with or without notice.Requirements:
High School diploma
Forklift training certificate
Basic math skills
Good communication skills
Computer skills with basic keyboarding and data entry
Well organized and accurate
Requires multi-tasking & flexibility to meet department needs.
Requires passing a pre-employment screening – drug screen included.
Lou-Rich Training Requirements:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this job, the employee is regularly required to use hands or fingers and talk and hear.
Work Environment:
The work environment characteristics described here are representative of those and employee encounters while performing the essential functions of this job.
Americans with Disabilities Act:
If you are a qualified individual with a disability, you have a right to request that the Authority make reasonable accommodations in order to help you accomplish your work, which must still be performed in all essential functions.