- Competency for the following in all positions: MIG, TIG, Spool Gun, Push/ Pull.
- Experience with blue print/schematic reading.
- Successful completion of pre-employment welding test given onsite.
- Ability to individually lift pounds.
- Physical ability to work full day lifting, bending, twisting, kneeling in a non-environmentally controlled work environment in a loud work environment.
- Ability to judge distances and read signs.
- This position may require employee to wear a respirator during job performance for extended periods of time. Applicant should be prepared to successfully pass physical and FIT testing for respirator usage.
- Valid Welding Certification or Certification from a welding program is a plus.
- Must have 2+ years working with aluminum.
- Weld parts or vehicle components (dependent on department alignment).
- Utilization of work order processing software.
- Participate in departmental meetings and training.
- Abide by all OSHA safety requirements including use of personal protective equipment (PPE).
- Assists in performance of routine preventive maintenance as well as inspections of assigned equipment.
- Follow established safety rules and regulations.
- Maintain a safe and clean workstation and production facility.
- Assist in performance of periodic departmental and facility wide inventories.
- Assist in periodic facility expansion and upgrade projects.
- Familiarity with basic hand and power tools.
- Ability to work independently and within a group setting.
- Detail oriented.
- Verbal comprehension (understand oral and written communications).
- Communication skills (provide clear instructions/directions).
- Reasoning skills (problem solving and troubleshooting skills).
- Pre-Employment Drug Test
- Pre-Employment Physical
- Pre-Employment Respirator Test and Fitting
-
Welder/ Fabricator
3 weeks ago
PrideStaff Arvada, United StatesPrideStaff is actively looking for a Welder / Fabricator for a client located in Arvada. This is a temp to hire position based on client need and performance. Job Description for the Welder / Fabricator:Set up and operate welding and cutting equipmen Welder, Fabricator, Staff, Ma ...
-
Welder/ Fabricator
3 weeks ago
PrideStaff Arvada, United StatesPrideStaff is actively looking for a Welder / Fabricator for a client located in Arvada. This is a temp to hire position based on client need and performance. Job Description for the Welder / Fabricator:Set up and operate welding and cutting equipmentWorks within appropriate weld ...
-
Welder / Fabricator
2 weeks ago
PrideStaff Arvada, United StatesPrideStaff is actively looking for a Welder / Fabricator for a client located in Arvada. This is a temp to hire position based on client need and performance. · Job Description for the Welder / Fabricator: · Set up and operate welding and cutting equipment · Works within appro ...
-
Welder/Fabricator
1 week ago
Crusoe Arvada, United StatesJob Description · Job DescriptionCrusoe Energy is on a mission to unlock value in stranded energy resources through the power of computation. · Take a look at what we do - · We aim to align the long term interests of the climate with the future of global computing infrastructu ...
-
welder/Fabricator
2 weeks ago
The Employment Firm Denver, United StatesJob Description · Job DescriptionLight Manufacturing in the Denver area who built there custom lights from the bottom is in need of welder/fabricator. · Shift: Monday-Thursday, 7:30 AM - 6:00 PM · Welder/Fabricator job Description: · Weld or join metal components together using v ...
-
Welders And Fabricators
13 hours ago
Aerotek Denver, United States**ALL WELDERS NEEDED-HIRING IMMEDIATLY****LOCATIONS AVAILABLE:**HendersonLittleton/Englewood**PAY:**$22-26hr**Depending on the weld test**SHIFT:**1st shift*will do up to 10hrs of OT/week as needed**QUALIFICATIONS:**+ +1 year of MIG, Dual Shield, or Flux Core welding experience+ C ...
-
Welder And Fabricator
13 hours ago
Aerotek Henderson, United States**Hiring Welder/Fabricators in Henderson, CO**We are seeking a skilled Welder/Fabricator who will be responsible for various types of welding, fabrication, and assembly according to customer drawings, specifications, or other forms of instruction.**Pay: $ $26.00hr (based on exper ...
-
Welder/Fabricator Technician
1 week ago
JM Family Enterprises Commerce, United States Full timeWe are seeking a skilled Welder/Fabricator Technician to join our maintenance team. As a crucial member of our team, you will be tasked with performing welding and fabrication tasks to support maintenance operations, ensuring the continued functionality and safety of our equipmen ...
-
Welder - Metal Fabricator
3 weeks ago
PrideStaff Denver, United StatesWelder | Metal Fabricator: · Hours: Monday - Friday, 8:00 AM - 5:00 PM · Pay Rate: $22-35/hr., Depending on Experience · Location: Denver, CO 80216 · Experience: Minimum 6 months of professional welding experience. · We are seeking experienced, skilled welders to join our te ...
-
Welder - Metal Fabricator
2 weeks ago
PrideStaff Denver, United StatesWelder | Metal Fabricator:Hours: Monday - Friday, 8:00 AM - 5:00 PMPay Rate: $22-35/hr., Depending on ExperienceLocation: Denver, CO 80216Experience: Minimum 6 months of professional welding experience.We are seeking experienced, skilled welders to join our team. If you can lay d ...
-
Welder/Fitter/Fabricator
2 weeks ago
Mountain Man Welding and Fabrication Denver, United StatesJob Description · Job DescriptionOur custom fabrication and structural steel shop has open positions for talented and experienced welder/fitter/fabricators. We are looking for individuals with 7+ years of fitting/welding/fabrication experience in the heavy structural, miscellaneo ...
-
Structural Welder/Fabricators
3 weeks ago
Aerotek Denver, United StatesYou will be joining a great team and a long standing company here in CO. There will be opportunities to grow within the welding industry/trade. They cover almost every part of welding from shop, field/travel, and pipe that you could be a part of. Benefits will be offered and are ...
-
Structural Welder/Fabricators
1 week ago
Aerotek Denver, United StatesYou will be joining a great team and a long standing company here in CO. There will be opportunities to grow within the welding industry/trade. They cover almost every part of welding from shop, field/travel, and pipe that you could be a part of. Benefits will be offered and are ...
-
Welder - Metal Fabricator
1 week ago
PrideStaff Denver, United StatesPrideStaff [Fabricator] As a Metal Fabricator at PrideStaff, you'll: Perform fabrication and assembly of structural plate metal products such as machinery, ovens, tanks, buildings, etc; Construct, assemble or rebuild equipment used in industries such as construction, extraction, ...
-
Welders/Fabricators NEEDED ASAP
3 weeks ago
FlexTrades Denver, CO, United StatesCombo Welders – are you looking for a contract position that will offer exceptional pay, flexibility, and the opportunity to work with some of the nation's most prominent manufacturing organizations? As a Combo Welder with FlexTrades, you will work in manufacturing facilities for ...
-
Welder / Structural Fabricator
2 weeks ago
Professional Employment Group of Colorado Boulder, United StatesJob Description · Job DescriptionWe are seeking skilled Structural Fabricators / Welders to join our dynamic and growing team in the structural fabrication industry In this role, you will be responsible for operating production machinery, cutting, fitting, welding, and assembling ...
-
Welder/Fabricator- 1st Shift
1 week ago
Aerotek Denver, United StatesAerotek - JobID: JP [Fabricator] As a Fabricator at Aerotek, you'll: Perform cutting/drilling/assembling; Use a chop saw, read tape, and measure; Use hand tools/drills, drill presses, etc; Lift 50 lbs...Hiring Immediately >> ...
-
Welder/Fabricator- 1st Shift
6 days ago
Aerotek Denver, United StatesAerotek - JobID: JP [Fabricator] As a Fabricator at Aerotek, you'll: Perform cutting/drilling/assembling; Use a chop saw, read tape, and measure; Use hand tools/drills, drill presses, etc; Lift 50 lbs...Hiring Immediately >> ...
-
Welder/Fabricator - 1st Shift - Weekly Pay
6 days ago
Aerotek Denver, United StatesAerotek - JobID: JP [Fabricator] As a Fabricator at Aerotek, you'll: Perform cutting/drilling/assembling; Use a chop saw, read tape, and measure; Use hand tools/drills, drill presses, etc; Lift 50 lbs...Hiring Immediately >> ...
-
Welder/Fabricator - 1st Shift - Weekly Pay
1 week ago
Aerotek Denver, United StatesAerotek - JobID: JP [Fabricator] As a Fabricator at Aerotek, you'll: Perform cutting/drilling/assembling; Use a chop saw, read tape, and measure; Use hand tools/drills, drill presses, etc; Lift 50 lbs...Hiring Immediately >> ...
Welder/ Fabricator - Westminster, United States - FR Conversions Inc
Description
The Welding position at FR Conversions is a member of the Preproduction or Production Team whose primary duties center around welding specific assembly workstations. Associates in this category are assigned to a specified workstation to perform tasks from preparing a vehicle for modification through the assembly process with a focus on welding. Welding Associates are required to train on multiple workstations and will be assigned to stations as required by the production schedule. All Associates are required to be flexible and trained on multiple stations. This position reports to a Line Supervisor and then the Plant Manager.
Job Category: Hourly, Monday through Thursday 3:00 p.m. to 1:30 a.m.
Job Requirements
Education & Experience Requirements
Primary Responsibilities
Secondary Responsibilities
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
Skill Requirements
Screenings Required:
Salary & Compensation:
The Welding/ Fabricator position is a full-time hourly position with approximate pay dependent upon qualifications and experience.
All salary and compensation packages at FR Conversions are subject to applicable labor laws, FR Conversions standard company policies, and payroll law including taxes and withholdings.
Job Categorization:
The Welding/ Fabricator position is a full-time, hourly, FLSA non-exempt position. (SOC Code
This position is designated as a Safety Sensitive position.
A Safety Sensitive position at FR Conversions is subject to post-offer and random drug/alcohol screenings.
All positions at FR Conversions are subject to at cause and post-incident drug/alcohol screenings.