2nd Shift Metal Finisher - Lomira - Jor-Mac, Inc.

    Jor-Mac, Inc.
    Jor-Mac, Inc. Lomira

    1 day ago

    Description
    SUMMARY OF POSITION:
    Responsible for setting up and operating a variety of hand power tools used to remove excess materials or burrs from metal surfaces; sharpen edges or corners; sands surfaces of metals.
    ESSENTIAL DUTIES AND RESPONSIBILITIES:
    This list of duties and responsibilities is not all-inclusive and may be expanded to include other duties and responsibilities, as management may deem necessary from time to time.
    • Grinds, files, or sands metal surfaces to remove burrs and sharp edges using hand tools and grinders.
    • Visually and physically inspect parts for any dents or scratches that need to be removed.
    • Strong understanding in blueprint reading.
    • Interprets drawings, manuals, specifications, or sample parts to determine finish condition of work pieces, sequences of metal finishing operations, and set up requirements.
    • Smooth surface to specified finish with hammer, dolly blocks, and hand and power tools.
    • Perform general clean-up duties of the equipment and surrounding areas.
    • May perform basic material handling duties with the use of manual pallet jack and/or forklift to move material and stage materials.
    • Adhere to all Jor-Mac and OSHA safety related work rules and procedures.
    • Other duties as assigned or required.
    QUALIFICATIONS:
    To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or abilities required.
    • High school diploma or general educational development (GED) and one to two years related experience and/or training; equivalent combination of education and experience.
    • Previous experience in a weld fabrication environment preferred, but not required.
    • Ability to do count, add, subtract, multiply and divide in all units of measure including whole numbers, fractions, and decimals.
    • Ability to read and comprehend instructions, specifications, and memos. Ability to prepare timesheets and job related paperwork. Ability to effectively communicate with other employees of the organization.
    PHYSICAL REQUIREMENTS:
    While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel; occasionally required to sit and talk; frequently required to hear, walk and continuously stand and reach with hands and arms. The employee will frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this position include close vision and the ability to adjust focus. Continuously exposed to manufacturing noise.
    The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an all-encompassing list of responsibilities, duties and skills required of personnel so classified. Reasonable accommodations to essential functions of the job will be made if necessary.
  • Work in company

    Metal Finish

    Only for registered members

    Metal fabricator looking for candidates with strong work ethic and dependability to fill metal finishing position. · Examine and feel surfaces of metal to detect defects such as dents or breaks in metalRemove dents and fills even surfaces with weldPrepares metal surfaces for pain ...

    Mayville

    2 months ago

  • Work in company

    Metal Finish

    Only for registered members

    We are looking for candidates that exhibit a strong work ethic and dependability and who also believe in our company values. · ...

    Mayville

    2 months ago

  • Work in company

    Metal Finish

    Only for registered members

    Metal fabricator looking for candidates with strong work ethic and dependability to fill Metal Finisher position. · ...

    Mayville, WI

    1 month ago

  • Work in company

    2nd Shift Metal Finisher

    Only for registered members

    Responsible for setting up and operating a variety of hand power tools used to remove excess materials or burrs from metal surfaces; sharpen edges or corners; sands surfaces of metals. · ...

    Lomira Full time

    2 weeks ago

  • Work in company

    Metal Finisher

    Only for registered members

    The Metal Finisher is primarily responsible for grinding, filing, or sanding surfaces of metal items or parts. · ...

    West Bend, WI

    1 month ago

  • Work in company

    Metal Finisher

    Only for registered members

    · Light Industrial Assignment to Hire · Metal Finisher · Are you meticulous, detail-oriented, and skilled with hand and power tools? We are looking for a dedicated Metal Finisher to join our Oshkosh client's team and play a critical role in preparing and perfecting hollow metal ...

    Oshkosh, WI

    20 hours ago

  • Work in company

    Metal Finisher

    Only for registered members

    The Metal Finisher is primarily responsible for grinding, filing or sanding surfaces of metal items or parts. · Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations. · Ensure compliance with corporate and plant safety s ...

    West Bend

    3 weeks ago

  • Work in company

    Metal Finisher

    Only for registered members

    +Job summary · Metal Finisher is primarily responsible for grinding, filing, or sanding surfaces of metal items or parts.Examines and feels surface of metal to detect defects such as dents, scratches, or breaks in metal. · Smooths surface of item to specified finish using handtoo ...

    West Bend

    1 month ago

  • Work in company

    Metal Finisher

    Only for registered members

    The Metal Finisher is primarily responsible for grinding, filing or sanding surfaces of metal items or parts. · ...

    West Bend Full time

    1 month ago

  • Work in company

    Metal Finisher

    Only for registered members

    We're looking for a Metal Finisher to work at our Fond du Lac, WI headquarters and be part of our great team. This role helps us deliver high-quality play and playground equipment to communities around the world by operating hand grinders and other tools to ensure smooth surfaces ...

    Fond du Lac Full time

    1 month ago

  • Work in company

    Metal Finisher

    Only for registered members

    We're looking for a Metal Finisher to work at our Fond du Lac, WI headquarters and be part of our great team. This role helps us deliver high-quality play and playground equipment to communities around the world by operating hand grinders and other tools. · ...

    Fond du Lac, WI

    1 month ago

  • Work in company

    Metal Finisher

    Only for registered members

    Motis Manufacturing Center is looking for a full-time Aluminum Polisher in Germantown, WI. · ...

    Germantown, WI

    1 month ago

  • Work in company

    Metal Finisher

    Only for registered members

    + Motis Manufacturing Center is looking for a full-time Aluminum Polisher in Germantown, WI.+ · + · +Motis Manufacturing Center has been manufacturing lightweight aluminum ramp systems for over 30 years. · +Polishes, grinds and cleans metal surfaces. · Removes excess weld as need ...

    Richfield $17 - $19 (USD) Full time

    1 month ago

  • Work in company

    Custom Metal Finisher

    Only for registered members

    We are seeking a skilled Finisher to join our manufacturing team. · The ideal candidate will possess a strong mechanical knowledge and experience with various machining processes. · Grinds and smooths surfaces of items. · ...

    Beaver Dam, WI

    1 month ago

  • Work in company

    Metal Finisher - 4 X 10 HR Shift

    Only for registered members

    Motis Manufacturing Center is looking for a full-time Aluminum Polisher in Germantown, WI. · Polishes, grinds and cleans metal surfaces. · Removes excess weld as needed. · ...

    Germantown, WI

    1 month ago

  • Work in company

    Metal Finisher - 4 X 10 HR Shift

    Only for registered members

    Motis Manufacturing Center is looking for a full-time Aluminum Polisher in Germantown,WI.Hours:Monday-Thursday,5:30am -3:30pm with limited overtime as needed. · Based in Germantown,Wisconsin,Motis Manufacturing Center has been manufacturing lightweight aluminum ramp systems for o ...

    Richfield $17 - $19 (USD) Full time

    1 month ago

  • Work in company

    Manufacturing Engineer

    Only for registered members

    The Manufacturing Engineer is responsible for new process development. · Participate in the development of manufacturing strategy within areas of responsibility. · Conceptualize, specify, install and qualify equipment and tooling. · ...

    Lomira

    1 month ago

  • Work in company

    Manufacturing Engineer

    Only for registered members

    The Manufacturing Engineer is responsible for new process development capital equipment procurement and driving continuous improvement in current processes relative to Safety Quality Delivery and Cost metrics. · Participate in the development of manufacturing strategy within area ...

    Lomira

    2 months ago

  • Work in company

    Production Helper

    Only for registered members

    Metalcraft of Mayville is seeking a Production Helper for 3rd Shift in our Mayville, WI facility. Apply today to join our team & a growing company  · ...

    Mayville Full time

    3 weeks ago

  • Work in company

    Tool & Die Apprentice - 1st Shift (Mayville)

    Only for registered members

    Metalcraft of Mayville is hiring a Tool & Die Maker Apprentice. The job involves analyzing specifications, laying out metal stock, setting up and operating machine tools to make and repair dies. · ...

    Mayville Full time

    1 month ago

  • Work in company

    Tool & Die Apprentice - 1st Shift (Mayville)

    Only for registered members

    Metalcraft of Mayville is hiring a Tool & Die Maker Apprentice. · Competitive PayPaid Holidays & Vacation · ...

    Mayville, WI

    1 month ago

Jobs
>
Lomira