- Manage Staffing plan required showing all personnel, all shifts, hours planned to work.
- Handle inbound shipments including unloading, setting in place etc. Verify material routing from dock to floor at the job site.
- Arrange storage and handling if material cannot be immediately set in place.
- Site security – interface with customer to determine responsibility for inventory.
- Maintain a Site Whiteboard (or a convenient wall if needed). Whiteboard items:
- Schedule – (updated to show progress) – show plan vs. actual
- Check-off lists with a detailed task lists where appropriate (ex. Showing decking carts that have been worked on)
- Layout showing working area
- Open Issues
- Contact list with phone numbers (incl. customer and contractors)
- Emergency contact list (safety representative, medical attention)
- The Installation Manager to maintain a daily report that records:
- Number of workers by trade (Customer provided)
- Fori personnel
- Hours worked (start / finish times)
- Work accomplished
- Problems encountered
- Customer delays (e.g. lack of parts, plant labor, delays due to production, lack of access, etc)
- Site records:
- Maintain redline mark ups of drawings and return them to the office for updating
- Before each shift conduct a short 5-10 min meeting:
- Line up the team on the plan for the day
- Review / Discuss any issues from the previous shift
- Record who is working (on daily report)
- All workers on that shift should attend including contractor supervision
- Acceptance plan
- Understand and drive Acceptance Criteria to close project and get customer sign off.
- Document extras and get them acknowledged by the customer
- Track issues beyond our control on the daily reports
- Become familiar with the following site issues:
- Do we have all of the drawings (mechanical and electrical) required?
- What support is required / planned from third party equipment suppliers?
- Site spares plan (drive components, controls, motors, etc.)
- Contractor details – scope of work, timing plan, number of workers, supervisor names etc.
- Safety orientation / badges
- Staffing plan
- Reporting Requirements:
- Open Issues List – at least every 2 days – send to all project team members.
- Installation schedule – MS Project maintains changes if any and distribute – send to all project team members.
- Daily Report – Compile and send out weekly report to the Project Manager.
- 10 Years of General Experience and 3 Years of On-site Installation
- High School Diploma
- Technical Certification Preferred
-
Diesel Mechanic/Technician I
1 day ago
Penske Truck Leasing Anna, United States Full time$5,000 Sign On Bonus · $33+ per hour pending experience · What's the Job? · Ready to move your career forward? As an experienced Technician at Penske, you'll do exactly that. Here, you'll perform preventative maintenance and repairs of all levels on the newest and best maintained ...
-
System's Integrator
2 weeks ago
DebonAir Mechanical Miami Lakes, United States**System's Integrator** · **What You'll Be Doing** · - Determine equipment needs and parts required for customer's system performance and pro-actively identify problems. · - Provides technical guidance to diagnose control system concerns and ensure occupancy comfort. · - Troubles ...
-
Electrical Service Technician
1 week ago
Lincoln Electric Holdings Inc. Shelby Township, United StatesLocation: Shelby, MI, 48315 · Req ID: 23883 · Electrical Serivce Technician · Job Summary: · Candidate will work out of Fori's Shelby Twp. Michigan facility and will report to the Customer Service Manager. · Job Duties and Responsibilities · Candidate must demonstrate the followi ...
-
Advanced Manufacturing Engineer
3 weeks ago
Copeland Sidney, United StatesIf you are an Engineering professional looking to for an opportunity to grow, Copeland has an exciting opportunity for you As an Advanced Manufacturing Engineer, you will be responsible for developing, implementing, and supporting the manufacturing processes for a new global prod ...
-
Advanced Manufacturing Project Engineer
2 weeks ago
Copeland Sidney, United StatesIf you are an Engineering professional looking to for an opportunity to grow, Copeland has an exciting opportunity for you As an Advanced Manufacturing Project Engineer, you will require a pioneering talent to create manufacturing processes for new global products. Based in our S ...
-
Instrumentation and Controls Technician
1 week ago
Copeland Sidney, United StatesAS AN INSTRUMENTATION AND CONTROLS TECHNICIAN, YOU WILL: · * Install, calibrate, troubleshoot, and upgrade instrumentation (pressures, temperatures, electrical measurements) for Copeland performance test stands · * Install/load, troubleshoot, and upgrade controls packages for dif ...
-
Manufacturing Engineer
2 weeks ago
G&G Industries Inc Shelby Township, United StatesG & G Industries, an ISO/TS 16949 supplier of automotive interior trim components and engine compartment/underbody insulators, and industry leader in manufacturing composite molded substrates, is seeking a Manufacturing Engineer/Project Engineer. · Responsibilities will include: ...
-
Controls Engineer
3 weeks ago
The Lincoln Electric Company Shelby Township, United StatesLincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln ...
-
Project Manager
3 weeks ago
Zobility Shelby Township, United StatesProject Manager - Industrial Automation (Direct Hire) · We are looking for a Project Manager to oversee BIW, Welding, Powertrain, Battery Pack, Engine, and EV Battery Assembly Automation for Auto OEMs. · Location: Shelby Township (100% On-site) · Travel: 20% · Base Comp + Annual ...
-
Revenue Cycle Informaticist
1 week ago
McLaren Health Care Shelby Township, United StatesPosition Summary: · Improves Revenue Cycle efficiency and automation, including but not limited to monitoring of Revenue Cycle systems, identifying root cause, documenting processes and related issues, and recommending improvements, and participating in and/or leading initiatives ...
-
Controls Technician 1st Shift
1 week ago
Magna International Inc. Shelby Township, United StatesJob Number: 66740 · Group: Magna Powertrain · Division: MPT Sterling Heights · Job Type: Permanent/Regular · Location: SHELBY TOWNSHIP · Work Style: · About us · We see a future where everyone can live and move without limitations. That's why we are developing technologies, syste ...
-
Controls Technician 2nd Shift
1 week ago
Magna International Inc. Shelby Township, United StatesJob Number: 66743 · Group: Magna Powertrain · Division: MPT Sterling Heights · Job Type: Permanent/Regular · Location: SHELBY TOWNSHIP · Work Style: · About us · We see a future where everyone can live and move without limitations. That's why we are developing technologies, syste ...
-
Controls Project Engineer
3 weeks ago
The Lincoln Electric Company Shelby Township, United StatesLocation: Shelby - Shelby Township, MI, United States (US) · Employment Status: Hourly Full-Time · Function: Engineering · Controls Project Engineer · Job Summary · This is an ideal opportunity for an experienced Controls Engineer with a background in electrical engineering. The ...
-
Controls Project Engineer
3 weeks ago
The Lincoln Electric Company Shelby Township, United StatesLocation: Shelby, MI, 48315 · Req ID: 23991 · Controls Project Engineer · Job Summary · This is an ideal opportunity for an experienced Controls Engineer with a background in Electrical Engineering. This candidate will initially support active projects and then manage specific p ...
-
On-Site Sr. IT Support Analyst
3 hours ago
Wright Technical Services Shelby Township, United StatesThis is position is Contract-to-Hire and fully ON-SITE in Shelby Township, Michigan. · Job Summary · The On-Site IT Support Analyst II is a Tier 2/3 position that supports all computer related functions. The Analyst II performs a variety of duties including, but not limited to, ...
-
Advanced Manufacturing Project Engineer
2 weeks ago
Copeland Sidney, United StatesIf you are an Engineering professional looking to for an opportunity to grow, Copeland has an exciting opportunity for you As an Advanced Manufacturing Project Engineer, you will require a pioneering talent to create manufacturing processes for new global products. Based in our S ...
-
Maintenance Supervisor
6 days ago
Schwan's Company Sidney, United States(Overview) · Who we are · Schwan's Company, a U.S. affiliate of the global lifestyle company, CJ CheilJedang Corporation, is a leading U.S. manufacturer and marketer of quality foods offered through retail-grocery and food-service channels. Our many popular brands include Red Bar ...
-
Senior Manufacturing Engineer
2 weeks ago
Spherion Northwest Ohio Sidney, United StatesSpherion is seeking a Senior Manufacturing Engineer for our client's manufacturing facility located in Sidney, OH. In this position, you will manage and coordinate the implementation of batching and converting process improvements. This results in daily operation efficiency impro ...
-
Maintenance Technician 1st Shift
1 week ago
Magna International Inc. Shelby Township, United StatesJob Number: 66737 · Group: Magna Powertrain · Division: MPT Sterling Heights · Job Type: Permanent/Regular · Location: SHELBY TOWNSHIP · Work Style: · About us · We see a future where everyone can live and move without limitations. That's why we are developing technologies, syste ...
-
Maintenance Technician 2nd Shift
1 week ago
Magna International Inc. Shelby Township, United StatesJob Number: 66738 · Group: Magna Powertrain · Division: MPT Sterling Heights · Job Type: Permanent/Regular · Location: SHELBY TOWNSHIP · Work Style: · About us · We see a future where everyone can live and move without limitations. That's why we are developing technologies, syste ...
Installation Lead - Shelby Township, United States - Fori Automation, LLC A Lincoln Electric Company
2 weeks ago
Description
Job Title: Installation Lead
Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding ExpertTM for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 11,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.
Location: Shelby - Shelby Township, MI, United States (US)
Employment Status: Hourly Full-Time
Function: Sales
Position Summary:
Candidate will work out of Fori's Shelby Twp. Michigan facility and will report to the Customer Service Manager. Candidate must demonstrate the following to be considered:
Requirements:
