- Proficient with the set-up and operation of up to 2 CNC machines (lathes and mills) according to blueprints, specifications, manufacturing orders and work instructions.
- Selects proper material and tool holders and tooling for the job. Prepares tool kits for incoming work orders. Designates required tooling and modifies as needed to manufacture parts to specification.
- Maintains correct dimensions of parts while running the job using measuring instruments such as micrometers, comparators, calipers, and gauges. Verifies the conformity of parts to blueprints/specifications during and/or after the run. Replaces and aligns dull and broken cutting tools as required to maintain conformity of parts.
- Assists supervisors, mechanical engineers and planners with work organization to implement continuous improvement strategies, reduce cycle and down-time for set-ups. Prepares the projects' layout, tooling, inspection gauges, and material.
- Recognizes improper machine functioning and reports findings to lead or supervisor.
- Able to identify, perform and troubleshoot operations and programming issues for improved product quality and tooling life. Ability to conduct and report findings from tool life studies.
- Uses passdown logbooks and face-to-face turnover meetings to communicate status of machine(s) to include: times tools were last changed, maintenance issues that occurred during the shift, performance of the machine during the shift, and status of ongoing setup (to include if collets were changes, tooling at each position changed and aligned, program loaded, 1st article pieces complete and verified, etc)
- Must be able to prioritize workload. Individual must be able to proficiently demonstrate the ability to measure and work to close tolerances.
- Relies on work instructions and pre-established guidelines to perform the functions of the job.
- Demonstrated technical knowledge and experience in reading and interpreting blueprints, the use of shop tools and measuring instruments.
- Demonstrated ability to perform Statistical Process Control (SPC) checks per specification and acts in accordance with output. Demonstrated knowledge and use of Shop Floor Systems.
- Familiar with standard practices, procedures and concepts within the metalworking field.
- Ability to work under general supervision with a wide-degree of creativity and latitude is required.
- Reports any safety violation, machining equipment misusage and/or improperly performed work to supervisor.
- Responsible for complying with the rules and regulations set forth by federal, state and local government, LISI Aerospace, and HSE procedures.
- Responsible for attending all HSE provided training. All employees are responsible for complying with HSE procedures, policies, plans, reporting requirements, and safe operating procedures at all times.
- Required to bring any known or suspected non-conformance for all company procedures or legal requirements to management's attention immediately.
- Continually seeks opportunities to improve HSE performance by establishing objectives, targets, benchmarks, and reporting results.
- Implements and suggests waste elimination initiatives specifically related to the department such as recycling opportunities to elimination of production and waste.
- Performs a variety of other tasks and duties.
- Analytical - Synthesizes complex or diverse information; Collects and researches data; Uses experience to complement data; understands the work flows and procedures. Ability to calculate and set controls which regulate machining factors (tool sequencing, speed, feed, depth & angle of cut).
- Technical Skills – Technical skills in manufacturing processes and methods including flow, layout, assembly and production equipment. Advanced knowledge of CNC controls and G-Codes. Ability to design and optimize CNC programs for fastening components. Demonstrated mechanical aptitude in troubleshooting machine problems and initiating repairs of machines.
- Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens intently to others and seeks clarification; Provides clear and pleasant responses to inquires regardless of the situation; Presents complex concepts in a simple manner to achieve understanding of benefit plans at all levels of the organization. Demonstrates group presentation skills; Participates in meetings.
- Team Work - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Places success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed; Recognizes accomplishments of team members.
- Business Acumen - Understands business implications of decisions; Displays orientation to profitability; Demonstrates knowledge of market and competition; Aligns work with strategic goals.
- Cost Consciousness - Works within approved budget; Develops and implements cost saving measures; Contributes to profits and revenue; Conserves organizational resources.
- Adaptability - Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.
- Planning/Organizing - Prioritizes and plans work activities of self; Uses time efficiently; Plans for resources in a creative way only adding cost as absolutely necessary; Sets goals and objectives; Develops realistic action plans.
- Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments.
- High School Diploma or GED. Technical Schooling preferred.
- Work experience in a fastener manufacturing environment
- Advanced knowledge of CNC programming, machinery and operating procedures, preferred.
- Proficient in blueprint interpretation, key process parameters and SPC data acquisition.
- A minimum of five (5+) years of combined technical education and experience.
- MasterCAM certification preferred
- Respecting and ensuring respect for the instructions and rules established in the field of health, safety and the environment (in particular the LISI golden rules)
- Immediately correcting, whenever possible, or reporting to his or her superiors and/or the HSE department, any malfunction or risky situation in the fields of health, safety and environmental protection
- Implementing preventive actions to reduce the environmental footprint and control health and safety risks
- Participate, upon request, in analyses (of risks, incidents) and HSE working groups related to his/her professional scope
- Be familiar with the main health and safety risks and the main environmental impacts relating to the scope of his/her work
- Be familiar with the site's HSE policy and objectives
- To be able to make proposals for improving working conditions and limiting environmental impact
- 401(k)
- 401(k)
- 401(k)
- Dental insurance
- Employee assistance program
- Flexible spending account
- Health insurance
- Health savings account
- Life insurance
- Paid time off
- Professional development assistance
- Referral program
- Retirement plan
- Tuition reimbursement
- Vision insurance
- 5x8
- 8 hour shift
- Evening shift
- Monday to Friday
- Overtime pay
- CNC Lathe: 3 years (Required)
- Night Shift (Required)
-
CNC Machinist
3 weeks ago
LISI Aerospace Garden Grove, CA, United StatesSUMMARY · The CNC Machinist utilizes both analytical and technical knowledge to maximize efficiency through the operation of CNC lathe machines and CNC mill machines used in the manufacturing of various types of fasteners, special products, and new or revised products. The CNC Ma ...
-
CNC Machinist
1 day ago
Aerotek Santa Ana, United States**Description:** · Two 2nd shift (1:00pm-9:30pm) and three 3rd shift (9:00pm-5:30am) CNC Machinist needed for large machine shop in Santa Ana, CA. Pay will be between $25-$35 an hour with overtime available. Machinist role will perform set ups and operate various CNC mills, lath ...
-
CNC Machinist
2 weeks ago
Aerotek Santa Ana, United States**Description:**Two 2nd shift (1:00pm-9:30pm) and three 3rd shift (9:00pm-5:30am) CNC Machinist needed for large machine shop in Santa Ana, CA. Pay will be between $25-$35 an hour with overtime available on Saturday.Machinist role will perform setups and operate various CNC Haas ...
-
CNC Machinist
4 days ago
Aerotek Santa Ana, United States: · Two 2nd shift (1:00pm-9:30pm) and three 3rd shift (9:00pm-5:30am) CNC Machinist needed for large machine shop in Santa Ana, CA. Pay will be between $25-$35 an hour with overtime available on Saturday. · Machinist role will perform setups and operate various CNC Haas mills, ...
-
CNC Machinist
1 week ago
Aerotek Santa Ana, United States**CNC Machinist** · **(Pay Rate $25/hr to $35/hr)** · **Description:** · + Machinist role will perform set ups and operate various CNC mills, lathes and manual machines to support a production-paced environment. · **Responsibilities** · + Set-up CNC lathes, mills, manual mac ...
-
CNC Machinist
1 week ago
FusionTech Villa Park, United StatesFor our client, a leading provider of technology, software, and engineering at the Villa Park location in Korschenbroich, we are currently looking for a CNC Turner (m/f/d) with a specialization in machining. · Your responsibilities: · Independent and responsible operation, setup, ...
-
CNC Machinist
2 weeks ago
Aerotek Santa Ana, United StatesAerotek - JobID: JP [Production Operator / Machinist] As a CNC Machine Operator at Aerotek, you'll: Operate machinery; Perform maintenance and monitor the output of machinery; Visually inspect production for flaw; Sort, organize, and prepare output for shipment...Hiring Immediate ...
-
CNC Machinist
4 weeks ago
Aerotek Anaheim, United States**_1ST SHIFT CNC MACHINIST OPENING_** · **_NEW CHALLENGES EVERYDAY_** · **Description:** · Day shift 6am-2:30pm setup machinist needed for machine shop in Anaheim, CA. Ideally looking for candidates with strong mill machining experience as well. Pay will be $25-$28 depending o ...
-
CNC Machinist
1 week ago
Aerotek Santa Ana, United StatesAerotek - JobID: JP [Production Operator / Machinist] As a CNC Machine Operator at Aerotek, you'll: Operate machinery; Perform maintenance and monitor the output of machinery; Visually inspect production for flaw; Sort, organize, and prepare output for shipment...Hiring Immediate ...
-
Cnc Machinist
3 weeks ago
Aerotek Santa Ana, United States**Description:** · Will start on the day shift (7am-3:30pm) and then move to the mid/2nd shift (12pm-8:30pm) CNC Machinist needed for CNC Lathe machines. Need to have setup experience. Pay will be between $24-$28 an hour and based on experience. · Details: · Setup and operates ...
-
CNC Machinist A
4 weeks ago
Hydraflow Anaheim, United StatesEOE Statement · We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by ...
-
CNC Machinist
1 week ago
BlueWave Solutions Dana, United StatesWe are currently seeking a permanent CNC Machinist (m/f/d) for our location in Selmsdorf near Lübeck to strengthen our team. Your responsibilities will include: · Operating CNC-controlled and conventional machining machines · Processing production orders according to specificatio ...
-
CNC Machinist
3 weeks ago
Essex Industries Seal Beach, United StatesEssex Industries, Huntington Beach, manufactures complex, tight tolerance parts, assemblies, and devices for the Aerospace and Medical market sectors. This requires skilled machinists with the ability to set-up, operate, and troubleshoot 3- and 5-axis CNC Machines. · Summary of J ...
-
CNC Machinist
2 weeks ago
Lisi Aerospace Garden Grove, United StatesSUMMARY · The CNC Machinist utilizes both analytical and technical knowledge to maximize efficiency through the operation of CNC lathe machines and CNC mill machines used in the manufacturing of various types of fasteners, special products, and new or revised products. The CNC M ...
-
CNC Machinist A
4 weeks ago
HydraFlow Fullerton, United StatesEOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by la ...
-
CNC Lathe Machinist
21 hours ago
RBC Bearings Incorporated Santa Ana, United States Full timeCNC Lathe Machinist - FRIDAY THROUGH SUNDAY STARTING AT 9:30 AM TILL 10:00 · RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace ind ...
-
CNC Machinist
1 week ago
Sandvik Coromant Westminster, United StatesSandvik Coromant In Westminster, SC Is Looking For A CNC MACHINIST SANDVIK COROMANT is the world's leading supplier of tools, tooling solutions, and know-how to the manufacturing industry. Our customers, which include major manufacturers within aerospace, automotive, medical, ene ...
-
CNC Machinist
1 week ago
Sandvik Coromant Westminster, United StatesSandvik Coromant In Westminster, SC Is Looking For A CNC MACHINIST SANDVIK COROMANT is the world's leading supplier of tools, tooling solutions, and know-how to the manufacturing industry. Our customers, which include major manufacturers within aerospace, automotive, medical, ene ...
-
CNC Machinist
5 days ago
Kimco Staffing Anaheim, United StatesJob DescriptionJob DescriptionOur client is a well established and reputable Electronic Manufacturer. They are currently hiring an experienced CNC Machinist for their North Orange County location. · All potential applicants are encouraged to scroll through and read the complete ...
-
cnc machinist
3 weeks ago
Coast Pneumatics Anaheim, United StatesJob Description · Job DescriptionOur company is seeking a skilled CNC Machinist with expertise in programming. The ideal candidate will possess a strong background in machining operations and hands-on experience in CNC programming. This role involves programming and operating CNC ...
CNC Machinist - Garden Grove, United States - Lisi Aerospace
Description
SUMMARY
The CNC Machinist utilizes both analytical and technical knowledge to maximize efficiency through the operation of CNC lathe machines and CNC mill machines used in the manufacturing of various types of fasteners, special products, and new or revised products.
The CNC Machinist is responsible for consistency in the operation and quality processes in accordance with product/process specifications and quality standards.
ESSENTIAL DUTIES AND RESPONSIBILITIES
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
To perform the job successfully, an individual should demonstrate the following competencies:
This position has no supervisory responsibilities.
May assist in the technical coaching of trainees and/or operators.
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
ESSENTIAL JOB REQUIREMENTS SKILLS AND ABILITIES
Education and/or Experience
Ability to read and comprehend correspondence and basic technical procedures.
Demonstrated ability to read code/machine language, write basic reports and instructions to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
Mathematical SkillsAbility to apply basic mathematical concepts and calculations: addition, subtraction, multiplication, division, ratios and standard units of measurements.
Reasoning Ability
Ability to define problems, collect data, establish facts and follow instructions in written and basic diagram formats.
Demonstrated application and execution of different problem solving techniques while prioritizing workload, tasks and functions to internal &/or external situations.
Computer Skills
To perform this job successfully, an individual should have basic knowledge and skill with CNC programming software/languages, Microsoft Word, SPC, and departmental applications (Shop Floor System).
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this job, the employee is frequently required to stand for extended periods of time, speak or listen, and walk.
The employee is frequently required to use eye-hand coordination, repetitive hand movement and manual dexterity use hands to finger, handle, or feel.
The employee must frequently bend, reach to shoulder level and lift, carrying, pushing and/or pulling up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, and ability to adjust focus. Hearing level within normal and average range.Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Safety and Environmental
The responsibilities of the position include compliance with company and governmental safety, environmental and hazardous materials regulations and procedures.
Employee will be required to wear personal safety equipment such as safety glasses, hearing protection, or proper footwear Personal Protective Equipment (PPE) in specified areas.
Participate in the development and promotion of the HSE culture, be exemplary in terms of health, safety and the environment, in particular by:Job Type:
Full-time
Pay:
$ $27.00 per hour
Expected hours:
No less than 40 per week
Benefits:
Schedule:
Supplemental pay types:
Experience:
Shift availability:
Work Location:
In person % % %%manufacturing%%