Jobs
>
Vancouver

    CNC Machinist - Vancouver, United States - LaborWorks

    LaborWorks
    LaborWorks Vancouver, United States

    4 weeks ago

    Default job background
    Full time
    Description

    Position Summary:


    Set up, load, adjust and operate a multiple torch CNC Plasma/Oxy-fuel Burning Machine to produce metal parts to specified shapes and tolerances.


    Essential Duties and Responsibilities:

    • Confirm order requirements are met, including the proper selection of job priority, material, cutting method, speeds, etc.
    • First Article Inspection on all production runs to specified tolerances and dimensions.
    • End product quality, including dimensional conformance, cut edge quality, squareness of cut, etc.
    • Machine productivity, efficiency, and safe operation.
    • Material yield and utilization.
    • Make machine adjustments and program edits to optimize production quality and efficiency.
    • Feed back to CNC Programmer relative to program accuracy and efficiency.
    • Record changes made from "standard" in programming, cutting medium, machine adjustments, etc.
    • Routine maintenance, care, and cleaning of equipment and work area.
    • Training of new employees.
    • Fill out necessary forms and paperwork, including routing sheets, time cards, production reports, etc.
    • Mark all cut product with appropriate job order and routing information. Ensure proper
    routing of all cut material to the next workstation occurs.


    • Handle material with use of overhead crane and forklift.
    • Management selection and replacement of consumables.
    • Perform all work functions within established safety guidelines, policies, and procedures.
    • Other work as assigned by Supervisor.

    Physical Requirements/Environment:

    • Ability to lift 50 lbs., physically load and unload product from table.
    • Environment has moderate heat, noise and fume exposure.
    • Moderate physical requirements.
    • Full time hearing protection required.

    Education/Experience:

    • Minimum of three months operational experience with previous CNC equipment or burning
    experience preferred.


    • Must understand basic oxy-fuel and plasma cutting technology and capabilities.
    • Reading, basic math, and dimensional knowledge required. Able to read English SAE and
    metric tapes and micrometers.


    • Full understanding of material flow and specifications.

    Length of Position:
    Great 'temp to perm' opportunity Our customer is looking to bring someone on to the team full-time and start a lasting career


    HOW TO APPLY:
    Please call our office at to schedule an interview.

    LABORWORKS - Vancouver

    5000 E Fourth Plain Blvd, Ste D101

    Vancouver, WA 98661


    Phone:
    | ┃ WORK


    Note:
    Please allow 1 hour to complete application process. Be sure to bring employment eligibility documents. LaborWorks is an EEO company.
  • Dometic Group

    CNC Machinist

    3 weeks ago

    Dometic Group Vancouver, United States

    Job Type · Full-time · Description · Reports to: Machining Supervisor · Direct Report: None · Travel: None · Schedule: On-Site · Vancouver: · Dometic Marine's headquarters are in Vancouver, British Columbia in Canada. The facility develops and manufactures hydraulic, elec ...

  • Dometic Group

    CNC Machinist

    4 weeks ago

    Dometic Group Vancouver, United States

    Job Type Full-timeDescriptionReports to: Machining SupervisorDirect Report: None Travel: NoneSchedule: On-SiteVancouver: Dometic Marine's headquarters are in Vancouver, British Columbia in Canada. The facility develops and manufactures hydraulic, electronic, and combustion-based ...

  • Aerotek

    CNC Machinist

    1 week ago

    Aerotek Portland, United States

    **CNC Machinist** · **Oak Grove, OR, US** · **Great Opportunity APPLY SOON ** · **Description:** · + Small family owned fabrication shop looking for a CNC Machinist to work on their swing shift. They need someone who has set up experience. Programming experience not required. ...

  • Aerotek

    Cnc Machinist

    1 day ago

    Aerotek Portland, United States

    **Job Title: CNC Machinist** · **Job Description** · We are looking for experienced CNC Machinists to operate 3 - 5-axis CNC Mills (Mori SEIKI, Haas, etc.) and fabricate aluminum and titanium components. Our business mix involves machining parts primarily for Boeing (70%) and H ...

  • Aerotek

    CNC Machinist

    2 weeks ago

    Aerotek Oregon City, United States

    Aerotek - JobID: JP [Production Operator / Machinist] As a CNC Machine Operator at Aerotek, you'll: Operate machinery; Perform maintenance and monitor the output of machinery; Visually inspect production for flaw; Sort, organize, and prepare output for shipment...Hiring Immediate ...

  • Aerotek

    CNC Machinist

    2 days ago

    Aerotek Portland, United States

    **CNC MACHINIST** · **PAY RATE - $25/HR - $32/HR** · **LOCATION - MILWAUKIE, OR / OAK GROVE, OR** · **Day shift and Swing shift** · **Job Description:** · + Small family owned fabrication shop looking for 2 CNC Machinists to work on their day and swing shift. · + Need someo ...

  • Aerotek

    CNC Machinist

    1 week ago

    Aerotek Oregon City, United States

    Aerotek - JobID: JP [Production Operator / Machinist] As a CNC Machine Operator at Aerotek, you'll: Operate machinery; Perform maintenance and monitor the output of machinery; Visually inspect production for flaw; Sort, organize, and prepare output for shipment...Hiring Immediate ...

  • Aerotek

    CNC Machinist

    1 week ago

    Aerotek Oregon City, United States

    Aerotek - JobID: JP [Production Operator / Machinist] As a CNC Machine Operator at Aerotek, you'll: Operate machinery; Perform maintenance and monitor the output of machinery; Visually inspect production for flaw; Sort, organize, and prepare output for shipment...Hiring Immediate ...

  • Aerotek

    Cnc Machinist

    2 weeks ago

    Aerotek Portland, United States

    Aerotek - JobID: JP [Production Operator / Machinist] As a CNC Machine Operator at Aerotek, you'll: Operate machinery; Perform maintenance and monitor the output of machinery; Visually inspect production for flaw; Sort, organize, and prepare output for shipment...Hiring Immediate ...

  • Aerotek

    Cnc Machinist

    2 days ago

    Aerotek Portland, United States

    Aerotek - JobID: JP [Production Operator / Machinist] As a CNC Machine Operator at Aerotek, you'll: Operate machinery; Perform maintenance and monitor the output of machinery; Visually inspect production for flaw; Sort, organize, and prepare output for shipment...Hiring Immediate ...

  • Kyocera

    CNC Machinist Programmer 2

    4 weeks ago

    Kyocera Vancouver, United States

    Job Description · Kyocera International, Inc. is hiring a CNC Machinist Programmer 2 in our Vancouver, WA facility · Kyocera International, Inc. is a leading manufacturer of state-of-the-art, high-technology products which are used in a variety of industries including aerospace, ...

  • Randstad North America, Inc.

    CNC Machinist

    3 weeks ago

    Randstad North America, Inc. Hillsboro, United States

    Randstad is partnering with our client in Hillsboro, OR to find qualified machinists for their manufacturing center creating materials and tools used in the semi-conductor industry. These positions include training but will require either experience CNC Machinist, Machinist, CNC, ...

  • Aerotek

    CNC Machinist

    2 weeks ago

    Aerotek Hillsboro, United States

    *PLEASE CONTACT EDDY PONCE FOR A PHONE SCREEN AT or TEXT DIRECTLY AT *We are currently hiring CNC Machinists for our Hillsboro client.Job Description: Seeking CNC Mill Machinists with 3+ year of CNC machining experience with Haas or Mori Seiki machinery. This position is not entr ...

  • Aerotek

    CNC Machinist

    2 weeks ago

    Aerotek Hillsboro, United States

    Aerotek - JobID: JP [Production Operator / Machinist] As a CNC Machine Operator at Aerotek, you'll: Operate machinery; Perform maintenance and monitor the output of machinery; Visually inspect production for flaw; Sort, organize, and prepare output for shipment...Hiring Immediate ...

  • PrideStaff

    CNC Machinist

    1 week ago

    PrideStaff Hillsboro, United States

    SWING SHIFT: 3:15pm -11:45pm M-F ( not open at this time) · CNC Mill Machinist · Our client designs and manufacturestoolingand fixturesto streamline and improve everyaspect of the Printed Circuit Board assembly process. They combineManufacturing Engineering, an experienced andi ...

  • Aerotek

    CNC Machinist

    2 weeks ago

    Aerotek Beaverton, United States

    Aerotek - JobID: JP [Production Operator / Machinist] As a CNC Machine Operator at Aerotek, you'll: Operate machinery; Perform maintenance and monitor the output of machinery; Visually inspect production for flaw; Sort, organize, and prepare output for shipment...Hiring Immediate ...

  • Path Engineering

    CNC Machinist

    2 weeks ago

    Path Engineering Tualatin, United States

    Path Engineering - JobID: [Production Operator / Machinist] As a CNC Machinist at Path Engineering, you'll: Operate a variety of CNC and manual machining equipment; Inspect and maintain machinery to ensure optimal performance; Use standard machine tools, set up fixtures and parts ...

  • Aerotek

    CNC Machinist

    1 day ago

    Aerotek Beaverton, United States

    Aerotek - JobID: JP [Production Operator / Machinist] As a CNC Machine Operator at Aerotek, you'll: Operate machinery; Perform maintenance and monitor the output of machinery; Visually inspect production for flaw; Sort, organize, and prepare output for shipment...Hiring Immediate ...

  • Gpac

    CNC Machinist

    1 week ago

    Gpac Beaverton, United States Full time

    Position Overview: We are seeking a skilled CNC Mill Operator to join our team. The ideal candidate will have experience operating CNC milling machines and be proficient in reading blueprints and measuring instruments. The CNC Mill Operator will play a crucial role in ensuring th ...

  • Aerotek

    CNC Machinist

    1 week ago

    Aerotek Clackamas, United States

    Aerotek - JobID: JP [Production Operator / Machinist] As a CNC Machine Operator at Aerotek, you'll: Operate machinery; Perform maintenance and monitor the output of machinery; Visually inspect production for flaw; Sort, organize, and prepare output for shipment...Hiring Immediate ...