-
Maintenance Test Pilot
2 days ago
M1 Support Services San Francisco, United States PermanentM1 is looking for a Maintenance Test Pilot with the following knowledge and experience: · SUMMARY: Performs flights and demonstrates proficiency during standardization flights on aircraft. Performs mathematical calculations required for weight and balance, performance data for ta ...
-
Maintenance Test Pilot
2 weeks ago
M1 Support Services Fort Rucker, United StatesM1 is looking for a Maintenance Test Pilot with the following knowledge and experience: · SUMMARY: Performs flights and demonstrates proficiency during standardization flights on aircraft. Performs mathematical calculations required for weight and balance, performance data for ta ...
-
Aviation Military Analyst
4 weeks ago
Avyon Consulting Group Fort Novosel, United StatesJob Description · Job DescriptionAVYON Consulting Group is seeking a Senior Military Analyst to support the Army's Future Vertical Lift program in Fort Rucker, AL. The applicant would have been a Former Army Officer(s) with at least fifteen (15) years of Aviation flight/combat op ...
-
SFEI Manager
2 weeks ago
M1 Support Services Fort Rucker, United StatesSFEI Manager (UH-60) · Location · Fort Novosel, AL · Job Posting No · 111478 · To apply for this position, you will need to scroll (using outside bar) to the bottom of the page and click on the "Apply for this position" button. · Start Date · TBD · Contract · FT Novosel AMS · Sal ...
-
SFEI Manager
5 days ago
M1 Support Services Fort Novosel, United StatesSFEI Manager (UH-60) · Location Fort Novosel, AL · Job Posting No · Start Date TBD · Contract FT Novosel AMS · Salary Range DOE · Posting Date 1/16/24 · Union No · FLSA Status Exempt · Shift Work Possible FT/PT Full-time · Relocation No · Travel Possible · M1 is looking fo ...
-
Spectrum Dynamics Geneva, United StatesSenior Consultant Data Analytics (m/w/d) · Introduction · As a data science team, we accompany Lidl on its journey towards becoming a data-driven and AI-enabled company. In close collaboration with the business departments, we drive innovative AI applications within the company. ...
-
Family Physician
3 weeks ago
KurzSolutions Fort Novosel, United StatesFind your "sweet home Alabama " in Dothan, a city with a rich history · The Community: Fort Rucker/Dothan, AL · The town of Dothan, AL, located in the southeastern corner of AL 20 miles from Georgia and 16 miles from Florida, was established as Poplar Head in 1885 as a trading ...
-
AH-64E Maintenance Pilot SME
5 days ago
General Dynamics Daleville, United StatesResponsibilities for this Position · Location: USA AL Daleville - 500 Industrial Blvd (ALS002) · Full Part/Time: Full time · Job Req: RQ167443 · Type of Requisition: · Regular · Clearance Level Must Currently Possess: · None · Clearance Level Must Be Able to Obtain: · ...
-
UH-60M Maintenance Pilot SME
4 weeks ago
NES Associates Daleville, United StatesType of Requisition: · Pipeline · Clearance Level Must Currently Possess: · None · Clearance Level Must Be Able to Obtain: · Secret · Suitability: · Public Trust/Other Required: · None · Job Family: · Quality Assurance · Job Qualifications: · Skills: · Army Aviation, Aviation Mai ...
-
AH-64E Maintenance Pilot SME
2 weeks ago
General Dynamics Information Technology Daleville, United StatesAH-64E Maintenance Pilot SME · Seize your opportunity to make a personal impact as an · AH-64E Maintenance Pilot SME · the Flight School Program. GDIT is your place to make meaningful contributions to challenging projects and grow a rewarding career. · At GDIT, people are our dif ...
-
UH-60M SME/Quality Advisor
2 weeks ago
General Dynamics Information Technology Daleville, United StatesUH-60M SME/Quality Advisor · Seize your opportunity to make a personal impact as a · UH-60M SME/Quality Advisor · supporting the Flight School Program. GDIT is your place to make meaningful contributions to challenging projects and grow a rewarding career. · At GDIT, people are o ...
-
UH-60M Maintenance Pilot SME
4 weeks ago
General Dynamics Daleville, United StatesResponsibilities for this Position · Location: USA AL Daleville - 500 Industrial Blvd (ALS002) · Full Part/Time: Full time · Job Req: RQ166176 · Type of Requisition: · Pipeline · Clearance Level Must Currently Possess: · None · Clearance Level Must Be Able to Obtain: ...
-
Global 6500 Instructor Pilot
2 weeks ago
CAE Dothan, United StatesSUMMARY · Responsible for the delivery of flight training in a flight simulator and ground school in accordance with the appropriate regulatory agency, CAE approved curriculum, and customer requirements. Act as subject matter expert (SME) ready to lead client(s) through their tra ...
-
Software Engineer
2 weeks ago
CAE Dothan, United StatesRole and Responsibilities · Summary · CAE USA is seeking an experienced Software Engineer to work with high fidelity real-time immersive training systems for multi-domain military platforms. This position will work with the Research & Development Engineering team to develop, inte ...
-
Grob G120TP Instructor Pilot
2 weeks ago
CAE Dothan, United States OTHERRole and Responsibilities · Summary · The Grob 120TP Instructor will work directly for the Chief Pilot/Grob Deputy Chief Pilot and will be responsible for student pilot training in the Grob G120TP and associated training devices, supporting the Army Fixed Wing Program and other p ...
-
Grob G120TP Instructor Pilot
2 weeks ago
CAE Dothan, United States OTHERAbout This Role · Who We Are: · CAE Vision: Our vision is to be the worldwide partner of choice in defense and security, civil aviation, and healthcare by revolutionizing our customers' training and critical operations with digitally immersive solutions to elevate safety, efficie ...
-
Grob G120TP Instructor Pilot III
2 weeks ago
CAE Dothan, United States OTHERAbout This Role · Who We Are: · CAE Vision: Our vision is to be the worldwide partner of choice in defense and security, civil aviation, and healthcare by revolutionizing our customers' training and critical operations with digitally immersive solutions to elevate safety, efficie ...
-
Global 6500 Instructor Pilot
2 weeks ago
CAE Dothan, United States OTHERRole and Responsibilities · Who We Are: · CAE Vision: Our vision is to be the worldwide partner of choice in defense and security, civil aviation, and healthcare by revolutionizing our customers' training and critical operations with digitally immersive solutions to elevate safet ...
Maintenance Test Pilot - Fort Novosel, United States - System Dynamics Intl
2 weeks ago
Description
Job Description
Job DescriptionSUMMARY: Performs flights and demonstrates proficiency during standardization flights on aircraft. Performs mathematical calculations required for weight and balance, performance data for take-off, cruise, and landing configurations of aircraft in which the individuals are qualified.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
1. Performs pre-flight, in-flight and post-flight procedures in accordance with Company, Army or Air Force directives depending on assignment.
2. Performs operational ground checks, taxi checks, hover checks on rotary wing aircraft; functional check flights, general and limited maintenance test flights, confirmation check flights of aircraft and aircraft systems undergoing maintenance and determines, in accordance with Army or Air Force technical publications and Company procedures, the airworthiness of an aircraft prior to its release for customer use.
3. Performs troubleshooting procedures of an aircraft on the ground and in flight, and makes appropriate (verbal or written log entry) recommendations to assist ground personnel in correcting deficiencies.
4. Performs recovery and ferry flights.
5. Instructs maintenance personnel for aircraft ground run-up and taxi operations to prepare employees for certification.
6. Keeps abreast of, and complies with FAA and local flying regulations and safety procedures as applicable for the job.
7. Maintains proficiency in basic flight maneuvers, appropriate aircraft emergency procedures and instrument flying consistent with Army or Air Force technical publications and Company requirements.
8. Briefs and demonstrates operational and emergency procedures to flight crew and non- crew members.
OTHER DUTIES AND RESPONSIBILITIES:
1. When not actually engaged in the physical operation of the aircraft, must be willing to be engaged in study, preparation and personal development to further physical and mental skills required to operate aircraft.
2. Operates motor vehicles in performance of assigned duties.
3. Completes records as required by TAMMS-A necessary to record aircraft and/or engine performance data. Completes maintenance documentation accurately using Integrated Maintenance Data System (IMDS) and required forms, and must show proficiency in IMDS within 90 days when assigned to the Air Force Project.
4. Required to participate in instrument flight simulator training.
5. May be required to fly profile flights, which may include NVG, PNVS, and tactics.
QUALIFICATION REQUIREMENTS:
1. Must demonstrate successfully the ability to start, run-up, fly, navigate and land aircraft that the individual is qualified to operate.
2. Must hold a valid and current FAA Commercial Pilot certificate with rotorcraft and instrument ratings in the aircraft class (fixed, rotary or both) for which a position is offered.
3. Must hold a valid FAA Instrument rating in the designated aircraft class for which job is offered.
4. Must have recorded (and proof presented) a minimum of 1,000 hours as pilot in command in the specific aircraft class for which a position is offered. Must have recorded (and proof presented) a minimum of 1,500 hours of pilot in command in the specific aircraft class for which a position is offered with 500 hours experience in helicopters of which at least 250 hours must have been in the UH-1H or Bell 205 when assigned to the Air Force Project. Fifty
percent of minimum flight time of pilot in command can be in commercial aircraft similar to or already in the Army
or Air Force's inventory when position is offered.
5. Must have satisfactorily completed a proficiency check, either Military (U.S. Army's UH- 1H Maintenance Test Pilot Course) or FAA Test Flight Program in the UH-1H or Bell 205 when assigned to the Air Force Project.
Other Requirements:
AH-64D/E Aircraft Qualification certificate(s)
AH-64D/E MTPC certificate
FAA commercial pilot certificate front/back
DA759 closeout, signed by an agent of the government
Class II FAA medical exam
DD214 member 4 (with honorable discharge required)
EDUCATIONAL EXPERIENCE:
1. High school diploma or equivalent General Educational Development (GED) certificate.
2. AMOC II graduation is a requisite for this job classification. Pilots flying OH-58D, CH-47, AH-64 or UH-60 aircraft must be a Phase II graduate in that particular aircraft before assuming Maintenance Test Pilot duties in those aircraft. Job candidates who meet qualifications 1 through 4 can be provided an AMOC Phase II course within 180 days from entering the classification to become Phase II AMOC II qualified, provided the Government approves AMOC Phase II flight training. Failure to successfully complete the required course will disqualify the employee for this job classification.
3. Maintenance Test Pilots flying the UH-60, CH-47, or AH-64 aircraft have successfully completed MTPC prior to assuming PC and MTP duties in those aircraft.
MATHEMATICAL SKILLS:
1. Ability to add, subtract, multiply and divide in all units of measure, using whole integers, common and decimal fractions.
2. Ability to compute rates, ratios, percentages, and interpolations necessary for aircraft and engine performance.
PHYSICAL REQUIREMENTS:
1. Must hold a valid and current FAA or military Class II Medical Certificate as prescribed by the Government. Must undergo initially and annually thereafter, flight physical(s) prior to piloting an U. S. Army or Air Force aircraft.
In addition, the candidate should possess the following requirements:
GENERAL REQUIREMENTS OF ALL CLASSIFICATIONS OTHER DUTIES:
1. Operates motor vehicles, machines and special purpose equipment as required by the job assignment.
2. Performs prescribed cleaning, preservation and operator maintenance on vehicles, tools and equipment. Performs housekeeping duties in immediate work area.
3. Ensures that tools and equipment used by the employee in the classification are properly calibrated.
4. When selected, attends schools and classes, which are designated by the Company for employees in the assigned classification.
5. Uses approved methods and publications in the performance of the assigned job.
6. Performs the duties of lower classified employees within the line of progression when assigned.
7. May be allowed to occasionally perform those assignments of employees holding the next higher classification in the line of progression in order to qualify for promotion except for Aircraft Mechanic to Aircraft Technical/NDT Inspector.
8. Completes and maintains records and reports as required by job assignment.
9. Demonstrates job procedures and assists in the on-the-job training (OJT) of employees within the classification as required.
10. Performs imaging technology (scanning and other related) functions as required by the job assignment.
11. Disposes of hazardous materials related to job assignment.
12. Performs duties using automated equipment and software utilized in the functional assignment.
13. May remove and reinstall cowlings, panels and fairings necessary to gain access to work within his classification.
14. When assigned to the flight line, provide customer support during launch and recovery and aircraft security as required.
LANGUAGE SKILLS:
1. Read, write, speak and understand English.
EDUCATION AND EXPERIENCE:
1. High school diploma or equivalent--General Educational Development (GED) certificate. This requirement is waived for employees with seniority dates prior to May 3, 1999.
PHYSICAL REQUIREMENTS:
1. Must be physically able to perform duties and responsibilities of the classification.
2. Must be able to work with required materials without debilitating irritation to skin, eyes or respiratory system while wearing the required personal protective equipment.
OTHER REQUIREMENTS:
1. Must have a valid state driver's license when required by job assignment.
2. Must obtain a valid government driver's license when required by job assignment.
3. Must obtain a valid commercial driver's license (CDL) to include hazardous material endorsement when required by job assignment.
4. Must obtain the level of Industrial Security Clearance required by the Government.