- Reads and works from related blueprints and other schematic drawings.
- Calibrates, installs and/or removes various instrumentation devices.
- Cuts, bends and installs tubing needed for the proper installation of the instrumentation device.
- When needed, reads and understands quality control manuals and testing specifications in order to obtain data needed to test or calibrate specific devices.
- Sets controls to regulate factors, such as current flow, timing cycle, pressure or vacuum, or temperature according to specifications.
- As needed, disassembles instrument or device in order to determine cause of defective operation or failure.
- Rejects malfunctioning devices and routes to specified departments for repair or salvaging of survivable parts.
- Layout, fabricate and install tubing and tub trays.
- Apply knowledge of mathematics to instrumentation, such as ratio and proportions, numbers with power of 10's, algebra equations, English-to-metric conversion, inches of water to PSI, inches of mercury to PSI, etc.
- Read blueprints, schematics and loop drawings and prepare job reports.
- Assemble and disassemble all types of electronic process controls, pneumatic controls and hydraulic systems and components.
- Calibrate equipment using common calibration procedures and be able to read, interpret, apply and know where to find other procedures.
- Understand the principles of pH and redox and equipment needed to measure them and be able to control the pH and redox of a liquid.
- Work with and understand Ohm's Law and Kerchoff's Law and with Diodes, capacitors and other electrical components.
- Understand steam and how it reacts to different situations, (e.g. saturation properties).
- Work with the principles of chemistry and physics required in instrumentation such as specific gravity, density of liquids and solids, mechanical advantages, proportions of liquids, melting points, freezing points, boiling points of liquids, etc.
- Troubleshoot and check out electrical, pneumatic, and hydraulic systems using proper test equipment.
- Understand fundamental instrumentation loops and how they function as a loop, and what the function of each component part is in each type of loop.
- Understand common types of chemical plant process equipment such as distillation columns, heat exchangers, boilers, turbines and compressors.
- Apply the procedures for measuring pressure level, flow, temperature, weight, density, heat flux, humidity and moisture, etc.
- Maintain current electrician's license or identification card to meet state regulations.
- Other duties as assigned.
- See the "Know Your Rights" poster available in English and Spanish.
- See the "Pay Transparency Nondiscrimination Provision" poster available in English and Spanish.
- This Company does not accept and will not consider unsolicited resumes, or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so (e., payment must be required pursuant to the terms of a written agreement).
- If you are a job seeker with a disability and require reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the People Services Team at
-
REGIONAL HSE MANAGER
4 weeks ago
Austin Industries La Porte, United States Full timeAustin Industrial is looking for a qualified HSE Professional to join our team based in Decatur, IL. This position will provide leadership to Austin with regard to all aspects of Health, Safety & Environmental. The position provides direct oversight, leadership and direction to a ...
-
REGIONAL HSE MANAGER
2 weeks ago
Austin Industries, Inc. La Porte, United StatesAustin Industrial is looking for a qualified HSE Professional to join our team based in Decatur, IL. This position will provide leadership to Austin with regard to all aspects of Health, Safety & Environmental. The position provides direct oversight, leadership and direction to a ...
-
Maintenance Technician
2 weeks ago
Ingenia Polymers Inc. La Porte, United StatesJob Description · Job DescriptionMaintenance Technician/Mechanic · Ingenia Polymers is a world-class, fast-growing, global company looking for people that have the passion to lead, the desire to grow, and the ability to create and deliver solutions for our customers. We offer an ...
-
I&E Tech Heavy on Instrument
6 days ago
Austin Industries Deer Park, United States Full timeAbout Austin Industrial · Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, ...
-
Rais Mechanical Tech
3 weeks ago
Acuren Inspection, Inc. La Porte, United StatesPosition Summary: · The Rope Access technicians are responsible for managing the safety of crews engaged in rope access activities, to organize work functions specific to rope access jobs, and to supervise crews engaged in performing a broad range of technical and/or industrial s ...
-
I&E Tech Heavy on Instrument
2 weeks ago
Austin Bridge Deer Park, United StatesAbout Austin Industrial · Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, ...
-
Instrument Technician
3 days ago
Austin Industrial Baytown, United StatesInstrumentation and Electrician Technician · Must be able to test, calibrate, troubleshoot, overhaul and repair controlling, indicating and measuring instrument devices to ensure specified operating performance using hand tools, testing and calibrating instruments and equipment a ...
-
Analyzer Technician
1 day ago
Occidental Petroleum Corporation Pasadena, United StatesContribute. Grow. OxyChem. Looking for a challenge? Desire to achieve your true potential? OxyChem is a growing, action-oriented, safety driven chemical manufacturing company continually striving to be the best in the business while staying focused on environmental protection. T ...
-
Rope Access NCCER Pipefitter
3 weeks ago
IRISNDT Inc Houston, United StatesJob Description · Job DescriptionSalary: · IRISNDT is currently seeking an experienced Rope Access Technician with NCCER Industrial Pipefitter Certification for a full-time position in Houston, TX. We offer competitive pay, full benefits, and rewarding career advancement opportu ...
-
Wingo Service Company, Inc. Houston, United States Full timeJob Description · Job DescriptionPosition Summary: · The I&E technician is responsible for repairing all I&E equipment across the site interacting with Operations, Site Technical and Line Management. This position is assigned to the Maintenance Team and reports directly to the Ma ...
-
I&e Tech
1 week ago
Austin Industrial Deer Park, United States**About Austin Industrial** · Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemic ...
-
IRISNDT Inc Houston, United StatesJob Description · Job DescriptionSalary: · IRISNDT is actively seeking the following manpower for two (2) long-term projects in East Texas tentatively to start July 1st · Project #1 ~ Corrosion Under Insulation (CUI): · Anticipated Duration 3 to 4 Months · Schedule, 50 Hours per ...
-
Maintenance I&E
2 weeks ago
Ascend Performance Materials Alvin, United StatesPOSITION OVERVIEW · Ascend Performance Materials is the premium provider of high-quality chemicals, fibers and plastics. With world scale integrated manufacturing facilities, we are able to develop new products from our core technologies and provide flexibility to respond to the ...
-
Safety Technician
23 hours ago
Piping Technology & Products Houston, United StatesJob Description · Job DescriptionThe Safety Technician is a self-motivated individual who monitors workplace activities to promote and ensure employee compliance with applicable Health, Safety and Environmental regulations. The Safety Technician assists the safety staff by identi ...
-
Maintenance Millwright Technician 1
1 month ago
Lyondell Basell North America Deer Park, United StatesLyondellBasell · Basic Function · Mechanical Maintenance Techs / Millwrights are tasked to apply mechanical expertise to insure the safe and reliable operation of site process plants and reduce operating costs. This is accomplished by executing assigned work according to plan and ...
-
Analyzer Technician
2 weeks ago
Occidental Petroleum Corporation Pasadena, United StatesTitle: Analyzer Technician · Location: United States-Texas-Pasadena · Other Locations: · *Description* · Contribute. Grow. OxyChem. Looking for a challenge? Desire to achieve your true potential? OxyChem is a growing, action-oriented, safety driven chemical manufacturing compan ...
-
IRISNDT Inc Houston, United States**IRISNDT** is actively seeking the following manpower for two (2) long-term projects in East Texas tentatively to start July 1st** · **Project #1 ~ Corrosion Under Insulation (CUI)**: · **Anticipated Duration 3 to 4 Months** · **Schedule, 50 Hours per week / Per Diem paid 7 days ...
-
HHPC - Contract Service Technician
1 week ago
GeoControl Systems, Inc. Houston, United StatesGeoControl Systems, a HUBZone company, is required to maintain a Federally mandated level of employees that reside (home residence) in a qualified HUBZone. ONLY applicants whose home address lies in a qualified HUBZone will be considered for this position. · You can verify wheth ...
-
Laboratory Technician
1 week ago
GeoLogics Corporation Houston, United States**Position**: Laboratory Service Technician · **W2 Hourly** Temporary Position with Limited Benefits · **Location**:Houston, TX · Hourly Rate is Negotiable Based on Experience · **Required**: U.S. Citizenship is Required · Do you have experience with equipment maintenance to incl ...
-
Facilities Ops Technician Ii
1 week ago
UTMB Health Galveston, United StatesPlease visit UTMB career site to apply: · **Minimum Qualifications**: · High School diploma or recognized equivalent and one journeyman level industrial/commercial craft/trade as approved by Property Services Leadership (i.e. Plumbing, Mechanical, HVAC, Structural, Instrumentatio ...
I&E Technician NCCER - La Porte, United States - Austin Bridge
Description
About Austin IndustrialAustin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S.
An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries.
Our team of 4,000 employee-owners, equipped with innovative technology and optimized procedures, helps owners optimize safety, productivity, profit margins, and cost-efficiency.
Instrumentation & Electrician Technician
Must be able to test, calibrate, troubleshoot, overhaul and repair controlling, indicating and measuring instrument devices to ensure specified operating performance using hand tools, testing and calibrating instruments and equipment and precision measuring instruments.
Specific Duties and Responsibilities:
Physical Demands:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms.
The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell.
The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.
Qualifications Required for this Position:
Education:
High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience.
NCCER certified and State Electrical License. Plant Maintenance experience preferred.Certifications/ Licenses:
NCCER, TDLR Electrical License, TWIC and DL
Experience: 5+10 years of Journeyman level experience.
Austin Industrial is an Equal Opportunity Employer.