Jobs
>
Chester

    Mill Machinist 1st Shift - Chester, United States - Aerocision

    Aerocision
    Aerocision Chester, United States

    4 weeks ago

    Default job background
    Description
    4 Day Work Week Set up and operate CNC milling machines (3, 4 and 5 axis)

    Verify tool lengths (including:
    setting of tool geometries and offsets)Set up and change fixtures, clamp fixtures and clamps as requiredLoad and unload of fixtures using overhead cranes, slings, chains etc.

    Adjustment of offsetsProduce conforming first piece products to process drawing and quality specificationsAchieve specified quality standardsReport any issues or problems to Supervision immediatelyWork within the designated workgroup to plan, prioritize and perform work to satisfy customer and company needsCarry out daily TPM activities as requiredExecute a 'Zero Defects' & 'Right First time' culture.

    Propose Operational Excellence & Continuous Improvements to management.
    Provide Root Cause & Corrective Action (RCCA) support.
    Ensure parts are handled and protected in a suitable manner to prevent damage during operations and movement.
    Comply with any other guidelines as defined in the Employee Handbook.
    Comply with company housekeeping standards.
    Adhere to company EH&S Policies.
    To perform other such duties as generally correspond to the nature of the position and its level of responsibility.

    RequirementsAeroCision, LLC is a covered federal contractorAll offers are contingent on a successful completion of aA background check with results acceptable to the Company.

    An authorization and relevant forms will be forthcomingA post-offer drug screen with a negative resultA post-offer physical assessment AeroCision is an Equal Opportunity Employer including Veterans and Individuals with Disabilities and provides reasonable accommodation for qualified individuals with disabilities and disabled veterans in the job application process.

    We only accept applications or resumes for current open positions.

    If you have any difficulty using our online system and you need an accommodation due to a disability, you may contact Taylor Rose in the Human Resources Department at to contact us about your interest in employment.

    This option is reserved for individuals who are unable to use or require assistance as the result of a disability and is not intended for other purposes.

  • Aerocision

    1 Shift Manual Machinist

    3 weeks ago

    Aerocision Chester, United States

    4 Day Work WeekSet up and operate CNC Lathe machines (Horizontal and/or Vertical). · Verify tool lengths (including: setting of tool geometries and offsets). · Set up and change fixtures, clamp fixtures and clamps as required. · Load and unload fixtures using overhead cranes, ...

  • International Staff Consulting

    CNC Milling Machinist 2nd Shift

    4 weeks ago

    International Staff Consulting Chester, United States

    Position: CNC Milling Machinist (2nd Shift)Shift: 2nd | Hours: 3:30 pm - 11pmType: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with 5-Axis Experience. The Candidate will be required to perform Se ...

  • Aerocision

    1 Shift Manual Machinist

    4 weeks ago

    Aerocision Chester, United States

    4 Day Work WeekSet up and operate CNC Lathe machines (Horizontal and/or Vertical).Verify tool lengths (including: setting of tool geometries and offsets).Set up and change fixtures, clamp fixtures and clamps as required.Load and unload fixtures using overhead cranes, slings, chai ...

  • Aerocision

    1st Shift VTL Machinist

    3 weeks ago

    Aerocision Chester, United States

    4 Day Work Week Set up and operate CNC Lathe machines (Vertical). · Verify tool lengths (including: setting of tool geometries and offsets). · Set up and change fixtures, clamp fixtures and clamps as required. · Load and unload fixtures using overhead cranes, slings, chains et ...

  • Aerocision

    1st Shift VTL Machinist

    4 weeks ago

    Aerocision Chester, United States

    4 Day Work WeekSet up and operate CNC Lathe machines (Vertical).Verify tool lengths (including: setting of tool geometries and offsets).Set up and change fixtures, clamp fixtures and clamps as required.Load and unload fixtures using overhead cranes, slings, chains etc.Adjustment ...

  • Aerocision

    Mill Machinist 1st Shift

    3 weeks ago

    Aerocision Chester, United States

    4 Day Work Week Set up and operate CNC milling machines (3, 4 and 5 axis) · Verify tool lengths (including: setting of tool geometries and offsets) · Set up and change fixtures, clamp fixtures and clamps as required · Load and unload of fixtures using overhead cranes, slings, ...

  • Gables Search Group

    CNC Milling Machinist 2nd Shift

    4 weeks ago

    Gables Search Group Chester, United States

    Position: CNC Milling Machinist (2nd Shift)Shift: 2nd | Hours: 3:30 pm - 11pmType: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with 5-Axis Experience. The Candidate will be required to perform Se ...

  • International Staff Consulting

    CNC Milling Machinist 2nd Shift

    3 weeks ago

    International Staff Consulting Chester, United States

    Position: CNC Milling Machinist (2nd Shift)Shift: 2nd | Hours: 3:30 pm - 11pmType: Full-Time | Mode: Direct Placement Pay Scale: $26 - 30/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with 5-Axis Experience. The Candidate will be required to perform Se ...

  • Lincoln Search Consultants Inc

    CNC Milling Machinist 2nd Shift

    3 weeks ago

    Lincoln Search Consultants Inc Chester, United States

    Position: CNC Milling Machinist (2nd Shift) · Shift: 2nd | Hours: 3:30 pm - 11pm · Type: Full-Time | Mode: Direct Placement · Pay Scale: $26 - 30/hr | Industry: Manufacturing · Our Client is Seeking a CNC Milling Machinist with 5-Axis Experience. The Candidate will be require ...

  • Wilcox Industries

    Machinists - Weekend Shifts

    3 weeks ago

    Wilcox Industries Newington, United States

    Wilcox is growing and we are currently seeking full-time machinists for the following departments: CNC Lathe, CNC Horizontal, and Vertical Mills. This is weekend work on Friday, Saturday and Sunday. There are 2 shifts available: 1st shift (20% shift differential) with the hours o ...

  • Wilcox Industries

    Machinists - Weekend Shifts

    3 weeks ago

    Wilcox Industries Newington, United States

    Wilcox is growing and we are currently seeking full-time machinists for the following departments: CNC Lathe, CNC Horizontal, and Vertical Mills. This is weekend work on Friday, Saturday and Sunday. There are 2 shifts available: 1st shift (20% shift differential) with the hours o ...

  • Raytheon Technologies

    Machinist - 3rd shift (Onsite)

    3 days ago

    Raytheon Technologies Middletown, United States

    Date Posted: Country:United States of AmericaLocation:PW102: Middletown Aircraft Rd P.O. Box 611, Middletown, CT, 06457 USAPosition Role Type:OnsitePratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the wor ...

  • AMETEK

    CNC Machinist, 3rd shift

    2 days ago

    AMETEK Middlefield, United States

    Come join a company where what you do makes a difference. For over 50 years, Zygo Corporation, located in Middlefield, CT has been a global leader in the design and manufacture of advanced optical metrology systems and ultra-precise optical components and assemblies. We are a wor ...

  • AMETEK

    CNC Machinist, 2nd shift

    3 weeks ago

    AMETEK Middlefield, United States

    Come join a company where what you do makes a difference. For over 50 years, Zygo Corporation, located in Middlefield, CT has been a global leader in the design and manufacture of advanced optical metrology systems and ultra-precise optical components and assemblies. We are a wor ...

  • International Staff Consulting

    CNC Milling Machinist 1st Shift

    4 weeks ago

    International Staff Consulting Portland, United States

    Position: CNC Milling Machinist Shift: 1st | Hours: 7am-3pm Type: Full-Time | Mode: Direct Placement Pay Scale: $20-28/hr | Industry: ManufacturingOur Client is Seeking a CNC Milling Machinist with at least 5-Axis Experience. The Candidate will be required to perform Setup, Opera ...

  • Component Engineering Inc.

    CNC Machinist-1st and 2nd Shift

    3 weeks ago

    Component Engineering Inc. Hartford, United States

    Job Description · Job DescriptionIMMEDIATE POSITION AVAILIBLE · Feel free to stop in and fill out an application at any time. Please bring resume if you have one. · Most interviews can be done on the spot if you stop in. All wages and benefits will be discussed at time of intervi ...

  • Pratt & Whitney

    Machinist - 3rd shift (Onsite)

    1 week ago

    Pratt & Whitney Middletown, United States

    Date Posted: Country:United States of America. Location:PW 102: Middletown Aircraft Rd P. O. Box 611, Middletown, CT, 06457 USA - Position Role Type:Onsite. Pratt & Whitney is working to once again transform the future of flightdesigning Machinist, 3rd Shift, Operations, Manufact ...

  • Raytheon Technologies

    Machinist - 3rd shift (Onsite)

    4 days ago

    Raytheon Technologies Middletown, United States

    Date Posted: · Country: · United States of America · Location: · PW102: Middletown Aircraft Rd P.O. Box 611, Middletown, CT, 06457 USA · Position Role Type: · Onsite · Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing ...

  • Ametek

    CNC Machinist, 3rd shift

    3 weeks ago

    Ametek Middlefield, United States Full time

    Come join a company where what you do makes a difference. For over 50 years, Zygo Corporation, located in Middlefield, CT has been a global leader in the design and manufacture of advanced optical metrology systems and ultra-precise optical components and assemblies. We are a wor ...

  • AMETEK

    CNC Machinist, 3rd shift

    1 week ago

    AMETEK Middlefield, United States

    Come join a company where what you do makes a difference. For over 50 years, Zygo Corporation, located in Middlefield, CT has been a global leader in the design and manufacture of advanced optical metrology systems and ultra-precise optical components and assemblies. We are a wor ...