- Operates & evaluates all process and metrology equipment within assigned area, upon successful completion of certification by trainer and engineer.
- Assures equipment meets all qualification and maintenance schedules as required by specification before processing product.
- Evaluates both product and qualification wafers through measurement and/or visual inspection. Responsible for accurate entry of that data into workstream system for assessment of processing using SPC controls.
- Escalates any failure of product and/or qualification wafers to engineering for evaluation.
- Escalates any process or metrology equipment errors to the equipment technicians for repair and recovery.
- Follows safe work practices and procedures to assure the safety of oneself and others, Escalates any safety violations or concerns to supervisor to address.
- Responsible for proper disposal of any and all waste generated on site as required by Cleanroom Protocol specification.
- Must be able to carry pods weighing up to 12 pounds using two hands repetitively over a 12 hour period. Must be able to pick pods from and place pods to storage racks ranging in height from the knees to the shoulders.
- Must be able to push/pull carts of pods ranging from 50 to 100 pounds as necessary for transport of material from one area to the next.
- Must be able to stand and walk for extended time periods during a 12 hour shift.
- Must be able to comply with clean room specifications that require all technicians to wear a clean room suit, including hood, mask, protective eye-wear and clean room boots.
- Manual process areas (CMP, Sort, BGBM) also required to grasp cassette handle with one hand while supporting cassette, weighing up to 12 pounds, with the other hand to manually load process equipment in the area.
- Must have basic computer skills needed to run automated process controls.
- Must be able to make calculations required for data entry to SPC controls, using a calculator as needed.
- Must be able to visually inspect wafers, pods, process tools, etc. for evaluation of processes.
- Must be able to read and comprehend specifications to achieve certifications required for technician duties.
- Must be able to communicate effectively with team, supervisor, and support personnel to achieve productive goals while maintaining commitments to the safety and quality of the workplace.
-
Manufacturing Technician
4 days ago
Principal Service Solutions Hillsboro, United StatesJob Description · Job DescriptionJoin our dynamic team as we transform the way high-tech companies work Principal Service Solutions is a leading technical workforce provider entrusted to safeguard the quality of operations at companies large and small. Help us create innovative s ...
-
Manufacturing Technician
1 day ago
TechOne Staffing San Francisco, United States PermanentManufacturing Technician (Intel - Hillsboro/ Aloha) · Location: Hillsboro, OR. (in Aloha, OR too) · Duration: 18 months · Day and Night Shifts are available in compressed work weeks (with overtime pay) · Are you ready to join a dynamic team in a state-of-the-art facility? We a ...
-
Manufacturing Technician
2 weeks ago
Principal Service Solutions Hillsboro, United StatesJob Description · Job DescriptionJoin our dynamic team as we transform the way high-tech companies work Principal Service Solutions is a leading technical workforce provider entrusted to safeguard the quality of operations at companies large and small. Help us create innovative s ...
-
Manufacturing Technician
1 week ago
INTEL Careers HILLSBORO, United States Permanent, Full timeJob Description · Oregon Assembly Technology Development Factory (OATDF) Manufacturing Technicians within Assembly and Test Technology Development (ATTD) will be responsible for, but are not limited to: · Perform functions associated with all wafer production including operations ...
-
Manufacturing Technician
1 week ago
INTEL Careers HILLSBORO, United States Permanent, Full timeJob Description · Oregon Assembly Technology Development Factory (OATDF) Manufacturing Technicians within Assembly and Test Technology Development (ATTD) will be responsible for, but are not limited to: · Perform functions associated with all wafer production including operations ...
-
Manufacturing Technician
1 week ago
INTEL Careers HILLSBORO, United States Permanent, Full timeJob Description · Oregon Assembly Technology Development Factory (OATDF) Manufacturing Technicians within Assembly and Test Technology Development (ATTD) will be responsible for, but are not limited to: · Perform functions associated with all wafer production including operations ...
-
Manufacturing Technician
1 week ago
INTEL Careers HILLSBORO, United States Permanent, Full timeJob Description · Oregon Assembly Technology Development Factory (OATDF) Manufacturing Technicians within Assembly and Test Technology Development (ATTD) will be responsible for, but are not limited to: · Perform functions associated with all wafer production including operations ...
-
Manufacturing Technician
2 days ago
Intel Corporation Hillsboro, United StatesJob Details:Job Description:Oregon Assembly Technology Development Factory (OATDF) Manufacturing Technicians within Assembly and Test Technology Development (ATTD) will be responsible for, but are not limited to: · Perform functions associated with all wafer production including ...
-
Manufacturing Technician
2 days ago
Intel Corporation Hillsboro, United StatesJob Details:Job Description:Oregon Assembly Technology Development Factory (OATDF) Manufacturing Technicians within Assembly and Test Technology Development (ATTD) will be responsible for, but are not limited to: · Perform functions associated with all wafer production including ...
-
Manufacturing Technician
2 days ago
Intel Corporation Hillsboro, United StatesJob Details:Job Description:Oregon Assembly Technology Development Factory (OATDF) Manufacturing Technicians within Assembly and Test Technology Development (ATTD) will be responsible for, but are not limited to: · Perform functions associated with all wafer production including ...
-
Mask Manufacturing Technician
1 week ago
INTEL Careers HILLSBORO, United States Permanent, Full timeJob Description · Intel's Technology & Development team is looking for Mask Manufacturing Technician (MMT). The MMT performs functions associated with mask manufacturing including successful operation of the assigned module in meeting factory safety quality and output goals MMT. ...
-
Mask Manufacturing Technician
1 week ago
INTEL Careers HILLSBORO, United States Permanent, Full timeJob Description · Intel's Technology & Development team is looking for Mask Manufacturing Technician (MMT). The MMT performs functions associated with mask manufacturing including successful operation of the assigned module in meeting factory safety quality and output goals MMT. ...
-
Mask Manufacturing Technician
4 days ago
INTEL Careers HILLSBORO, United States Permanent, Full timeJob Description · Intel's Technology & Development team is looking for Mask Manufacturing Technician (MMT). The MMT performs functions associated with mask manufacturing including successful operation of the assigned module in meeting factory safety quality and output goals MMT. ...
-
Manufacturing Operator Technician
2 weeks ago
Principal Service Solutions Hillsboro, United StatesJob Description · Job DescriptionJoin our dynamic team as we transform the way high-tech companies work Principal Service Solutions is a leading technical workforce provider entrusted to safeguard the quality of operations at companies large and small. Help us create innovative s ...
-
Manufacturing Technician x
2 weeks ago
Principal Service Solutions Hillsboro, United StatesJob Description · Job DescriptionPrincipal Service Solutions is hiring a Manufacturing Technician. No Experience Necessary. · Join our dynamic team as we transform the way high-tech companies work Principal Service Solutions is a leading technical workforce provider entrusted to ...
-
Semiconductor Manufacturing Technician
2 weeks ago
Principal Service Solutions Hillsboro, United StatesJob Description · Job DescriptionPrincipal Service Solutions is hiring Manufacturing Technicians. No experience is necessary, we provide training. Entry Level individuals are encouraged to apply · Join our dynamic team as we transform the way high-tech companies work Principal S ...
-
Manufacturing Technician
1 week ago
INTEL Careers HILLSBORO, United States Permanent, Full timeJob Description · Oregon Assembly Technology Development Factory (OATDF) Manufacturing Technicians within Assembly and Test Technology Development (ATTD) will be responsible for, but are not limited to: · Perform functions associated with all wafer production including operations ...
-
Manufacturing Technician
1 week ago
INTEL Careers HILLSBORO, United States Permanent, Full timeJob Description · Oregon Assembly Technology Development Factory (OATDF) Manufacturing Technicians within Assembly and Test Technology Development (ATTD) will be responsible for, but are not limited to: · Perform functions associated with all wafer production including operations ...
-
OWLA Manufacturing Technician
1 week ago
INTEL Careers HILLSBORO, United States Permanent, Full timeJob Description · Performs electrical or mechanical troubleshooting to determine problems in nonfunctioning equipment used in the manufacturing process. Dismantles, adjusts, repairs, and installs/assembles equipment according to layout plans, blueprints, operating or repair manua ...
-
Manufacturing Technician
1 week ago
INTEL Careers HILLSBORO, United States Permanent, Full timeJob Description · Oregon Assembly Technology Development Factory (OATDF) Manufacturing Technicians within Assembly and Test Technology Development (ATTD) will be responsible for, but are not limited to: · Perform functions associated with all wafer production including operations ...
Manufacturing Technician - Hillsboro, United States - Jireh Semiconductor
Description
Job Description
Job DescriptionPOSITION SUMMARY
Jireh Semiconductor in Hillsboro, OR is looking for several entry-level Manufacturing Technicians for their Semiconductor Fab. This position performs functions associated with all wafer production operations, including photolithography, thin film, etch, BGBM and diffusion. Performs set-up, calibration and preventative maintenance tasks on wafer fabrication equipment. This posting is for back-end nights (details below).
RESPONSIBILITIES AND DUTIES
PHYSICAL DEMANDS/WORK ENVIRONMENT
Temp to hire opening 6-12 months, conversion based on company needs as early as 180 days. This position will be staffed by an existing agency partner.
Shift Details:
D shift Back Nights Wed-Fri every other Saturday, 15% shift differential
EXPERIENCE/EDUCATION
No experience required.
(Preferred) Experience in a fast-paced environment.
(Preferred) AA Degree or higher, 1 yr +. experience.
QUALIFICATIONS AND OTHER REQUIREMENTS
COMPANY INFORMATION:
Alpha and Omega Semiconductor (AOS) is committed to excellence in design, manufacturing, and responsiveness to our customers through the continued development of new technologies, products and innovative solutions. We bring to the market devices designed to benefit our customers by meeting their product specific needs. Our mission is to bring value to our customers, shareholders and employees.
AOS differentiates itself by integrating its Discrete and IC semiconductor process technology, product design, and advanced packaging know-how to develop high performance power management solutions. AOS's portfolio of products targets high-volume applications, including but not limited to portable computers, flat panel TVs, LED lighting, smart phones, battery packs, consumer and industrial motor controls and power supplies for TVs, computers, servers and telecommunications equipment.
EEO Statement:
Jireh Semiconductor prohibits discrimination based on race, color, religion, gender, national origin, age, disability, veteran status, marital status, pregnancy, gender expression or identity, sexual orientation or any other legally protected status.
Jireh Semiconductor, Inc., a wholly owned subsidiary of Alpha and Omega Semiconductor Ltd., is the in-house wafer fab for AOS and is located in Hillsboro, Oregon.
Job Posted by ApplicantPro