Jobs
>
Torrance

    CNC Grinder - Torrance, United States - RBC Bearings

    RBC Bearings
    RBC Bearings Torrance, United States

    2 weeks ago

    Default job background
    Description
    CNC Grinder

    GENERAL RESPONSIBILITIES
    • Setup and perform complex grinding operations on ID, OD, surface grinders, honing and lapping equipment.
    • Responsible for inspecting ground parts.
    SPECIFIC RESPONSIBILITIES OR AREAS UNDER INCUMBENTS CONTROL

    Works with minimal supervision:
    • Performs ID, OD, and surface grinding.
    • Set-up and operate precision grinding equipment.
    • Consistently work to close tolerances (typically one tenth or less) on all grinding equipment.
    • Work from blueprints and/or set up sheets.
    • Select proper wheels for various applications.
    • Perform honing and lap operations to close tolerances (typically one tenth or less).
    • Check work using precision measuring equipment, optical flats, micrometers, indicators, etc.
    • Assist in training other employees.
    • Perform Statistical Process Control (SPC).
    • Maintain necessary records.
    • Perform preventative maintenance on grinding equipment.
    • Make repairs within scope of ability.
    Qualifications

    EDUCATION/PRIOR EXPERIENCE REQUIREMENTS
    • Three to five years of experience working with precision grinders (Surface and O.D.), honing and lapping equipment.
    • Must be familiar with both internal dimensions (ID), and outside dimensions (OD) and have worked with close tolerances.
    • Must have good knowledge of shop math.
    • Must be able to read blueprints.
    • Must be familiar with precision measuring equipment.
    U.S. Citizenship or Resident Alien (green card holder) status required to support work on government projects.

    PHYSICAL/MENTAL REQUIREMENTS

    Restrictions are limited only by the individual's inability to perform essential job duties and where an unsafe condition would result for the individual or surrounding employees.
    • Required Lifting Weight: 35 lbs. Lifting Frequency: Daily
    • Frequent lifting or standing for extended periods.
    • Frequent lifting to 20 pounds from floor to bench level, occasional lifting to 50 pounds.
    Experience
    • CNC grinding experience is required.
    • 5+ years of machining experience
    • Vast experience in metrology including calipers, micrometers, bench centers with indicators, height gages and optical comparators;
    • Experience with manual machinery is preferred,
    • Excellent attention to detail and willingness to approach difficult, small run projects.
    • Ability to read and interpret complex drawings and work instructions.
    • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
    • Demonstrates use of intermediate computer operations and intermediate software packages.
    • Ability to handle multiple tasks and projects simultaneously.
    • Use and be familiar with assembly and measuring tools, interpret visual aids and must be able to perform simple shop math.
  • RBC Sonic Industries, Inc

    CNC Grinder

    4 days ago

    RBC Sonic Industries, Inc Torrance, United States

    CNC Grinder - 2nd Shift Weekend · **GENERAL RESPONSIBILITIES** · - Setup and perform grinding operations on OD, surface grinders equipment. · - Responsible for inspecting ground parts. · **SPECIFIC RESPONSIBILITIES OR AREAS UNDER INCUMBENTS CONTROL** · Works with mínimal supervis ...

  • RBC Bearings

    CNC Grinder

    3 weeks ago

    RBC Bearings Torrance, United States

    CNC GrinderGENERAL RESPONSIBILITIESSetup and perform complex grinding operations on ID, OD, surface grinders, honing and lapping equipment.Responsible for inspecting ground parts.SPECIFIC RESPONSIBILITIES OR AREAS UNDER INCUMBENTS CONTROLWorks with minimal supervision:Performs ID ...

  • RBC Sonic Industries, Inc

    CNC Grinder Weekend 1st Shift

    4 days ago

    RBC Sonic Industries, Inc Torrance, United States

    **CNC Grinder - 1st Shift Weekend (Thursday - Monday)** · **GENERAL RESPONSIBILITIES** · - Setup and perform grinding operations on OD, surface grinders equipment. · - Responsible for inspecting ground parts. · **SPECIFIC RESPONSIBILITIES OR AREAS UNDER INCUMBENTS CONTROL** · Wor ...

  • Flag Solutions

    CNC Grinder

    1 week ago

    Flag Solutions Gardena, United States

    Job Description · Job DescriptionPosition Summary: · Level Three: Working without supervision, level three operators perform all levels of centerless grinding operations including intermediate setups. This includes the ability to hand dress grinding wheels to achieve customer spe ...

  • Aerotek

    CNC Grinder

    1 week ago

    Aerotek Santa Ana, United States

    **Description:**One day shift (6am-2:30pm) and two second shift (3:00PM - 11:30PM) Grinders needed for large aerospace facility in Santa Ana, CA. Pay will be based on experience but typically will be between $25-$32 an hour. Looking for candidates ideally with CNC Studer S-33 & S ...

  • Aerotek

    CNC Grinder

    1 week ago

    Aerotek Santa Ana, United States

    Aerotek - JobID: JP [Production Operator / Machinist] As a Grinder at Aerotek, you'll: Operate different types of grinding machines; Operate CNC machines, performing a variety of machine shop functions; Perform tool room work; Set up and operate specified machining centers and gr ...

  • Aerotek

    CNC Grinder

    3 weeks ago

    Aerotek Santa Ana, United States

    **_CNC GRINDERS NEEDED_****Description:**One day shift (6am-2:30pm) and two second shift (3:00PM - 11:30PM) Grinders needed for aerospace facility in Santa Ana, CA. Pay will be $20-$28 an hour and will be based on experience. Ideally looking for CNC Studer S-33 & S-40 grinding ex ...

  • Aerotek

    CNC Grinder

    1 week ago

    Aerotek Santa Ana, United States

    Aerotek - JobID: JP [Production Operator / Machinist] As a Grinder at Aerotek, you'll: Operate different types of grinding machines; Operate CNC machines, performing a variety of machine shop functions; Perform tool room work; Set up and operate specified machining centers and gr ...

  • Aerotek

    CNC Grinder

    4 days ago

    Aerotek Santa Ana, United States

    **Description:** · 1st shift (6am-2:30pm) and 2nd shift (3:00PM - 11:30PM) Grinders needed for aerospace facility in Santa Ana, CA. Pay will be $20-$28 an hour and will be based on experience. Ideally looking for CNC Studer S-33 & S-40 grinding experience but open to candidates ...

  • Aerotek

    CNC Grinder

    1 week ago

    Aerotek Santa Ana, United States

    Aerotek - JobID: JP [Production Operator / Machinist] As a Grinder at Aerotek, you'll: Operate different types of grinding machines; Operate CNC machines, performing a variety of machine shop functions; Perform tool room work; Set up and operate specified machining centers and gr ...

  • Amratec Engineering

    CNC Grinder Set-up/Operator

    2 weeks ago

    Amratec Engineering Torrance, United States

    Job Description · Job DescriptionBusy Aerospace Machine Shop looking for CNC O.D. Grinding SET-UP/OPERATOR to run Studer equipment. Must be reliable, detail oriented. Must be able to work independently including programming using Studer Picto-Gramming on a Fanuc control, set-up, ...

  • Recruit Staff HR

    CNC Studer Grinder Machine

    2 weeks ago

    Recruit Staff HR Santa Ana, United States

    Job Description · Job DescriptionPOSITION SUMMARY: · The Grinder is responsible for the set-up and operation of precision cylindrical machine. Will perform precision cylindrical grinding of parts · per customer specification. Will perform required quality workmanship through the ...

  • Aerotek

    Traveling CNC Grinder Mechanic

    7 minutes ago

    Aerotek Los Angeles, United States Full time

    Intermediate LevelYou Will Train in Europe for 2 Weeks · *Candidates must have experience working on CNC machines Bonus points if you have worked on STUDER brand machines* · Description: · Traveling CNC Mechanic that will be working on precision grinding equipment for a Swiss-bas ...

  • FLAG Solutions

    Thread Roll Operator

    2 weeks ago

    FLAG Solutions Gardena, United States

    **Qualifications** · - Minimum of 3 years of experience as a Tool and Die Maker · - Proficient in the use of calipers, micrometers, and other precision measuring instruments · - Experience with lathe operation and tooling assembly · - Knowledge of GD&T (Geometric Dimensioning and ...

  • NC Dynamics, LLC

    Bench Hand

    3 weeks ago

    NC Dynamics, LLC Long Beach, United States

    **Job Title**: Bench Hand / Deburr · Job Category · - Manufacturing ? Greater Los Angeles · **About Us**: · We are a leading diversified full servicing manufacturing company in greater Los Angeles area that services the · Aviation and Defense Industries since 1979. We provide our ...

  • ALL METALS PROCESSING OF ORANGE COUNTY LLC

    Grinder 1

    3 weeks ago

    ALL METALS PROCESSING OF ORANGE COUNTY LLC Santa Ana, United States

    ***: · - Under close supervision and in accordance to level of knowledge and experience, the Grinder is responsible for the set-up and operation of precision cylindrical machine. Will perform precision cylindrical grinding of parts per customer specification. Will perform require ...

  • ALL METALS PROCESSING OF ORANGE COUNTY LLC

    Grinder 1

    2 weeks ago

    ALL METALS PROCESSING OF ORANGE COUNTY LLC Santa Ana, United States

    ***: · - Under close supervision and in accordance to level of knowledge and experience, the Grinder is responsible for the set-up and operation of precision cylindrical machine. Will perform precision cylindrical grinding of parts per customer specification. Will perform require ...

  • Hale Glass

    Glazier Trainee

    3 weeks ago

    Hale Glass Placentia, United States

    **JOB SUMMARY**: · Founded 46 years ago, Hale Glass has grown from humble beginnings to earning its place as one of Southern California's most trusted and respected names in commercial glass & glazing. Hale Glass wouldn't exist today without our stellar team - our most valued ass ...

  • Aerotek

    1st Shift-grinder/shop

    1 week ago

    Aerotek Torrance, United States

    Aerotek - JobID: JP [Production Operator / Machinist] As a Grinder at Aerotek, you'll: Operate different types of grinding machines; Operate CNC machines, performing a variety of machine shop functions; Perform tool room work; Set up and operate specified machining centers and gr ...

  • Aerotek

    Grinder/shop Labor

    1 week ago

    Aerotek Torrance, United States

    Aerotek - JobID: JP [Production Operator / Machinist] As a Grinder at Aerotek, you'll: Operate different types of grinding machines; Operate CNC machines, performing a variety of machine shop functions; Perform tool room work; Set up and operate specified machining centers and gr ...