- Responsible for the Front-End Engineering and production design deliverables for large capital projects, TIC in excess of $100MM
- Responsible for the technical oversight and leadership of other engineers and designers.
- Must have experience with development of project scope, work hour estimates, project budgets, schedules and mechanical construction deliverables. Shall be capable of working as a member of an integrated engineering team to produce a coherent, executable construction package.
- Ability to be able to work independently as well as monitor / mentor more junior engineers to meet the required deliverables on one large project or several simultaneous smaller projects.
- May be required to conduct vendor drawing reviews, client interface, model reviews, and related calculations.
- Deep knowledge of HVAC, Plumbing and Fire Protection.
- Bachelors degree in engineering required; Mechanical discipline preferred.
- 10+ years (minimum) of experience in industrial and commercial design of HVAC and Plumbing systems.
- Fire protection experience preferred.
- Professional Engineering License (P.E.) preferred.
- Proven leadership skills with small engineering design teams and a wide range of very diverse clients from multi-nationals to start-up companies.
- Working Experience with the following:
- Cooling towers, Chillers, Fans, Boilers, Pumps, AHUs, Heat Pumps, Humidification Systems, Hot Water Heaters.
- Designing Clean Room Environments
- Designing Dust Collection Systems
- Design of plumbing systems including domestic hot/cold water lines and sanitary/waste lines.
- Ventilation for potential hazard mitigation
- Fluent with national codes and standards (ICC, ASHRAE, SMACNA, and NFPA)
- HVAC Design Programs Including CHVAC, Trane Trace, AutoCAD and MicroStation.
- Building Automation and Control Systems.
- FP design codes.
- Working knowledge of other engineering disciplines and the ability to coordinate with them to meet design requirements.
- Ability to travel as needed to survey client sites.
- Excellent interpersonal and communication skills with supervisory experience.
- Travel to client sites will comply with all KBR and Client Safety Rules, Processes and Procedures
- Work at client sites may require using and wearing personal protective equipment such as fire-retardant clothing, hearing and eye protection, hard hat and steel-toed boots.
- Work at client sites may require moderate physical exertion including walking to operating areas, ascending/descending stairs, walking the client property.
- This may include climbing ladders, lifting to up to 35 lbs., etc.
-
Mechanical Engineer
7 hours ago
Technical Staffing Resources Newark, United StatesTSR is seeking to employ a few Mechanical Engineers to perform engineering calculations, writing specifications, scope of work, sizing equipment, and designing. These are contract positions with one of the country's largest EPC firms. The expected duration of the project is 1 yea ...
-
Mechanical Engineer
1 day ago
Fort Point, LLC Christiana, United StatesMECHANICAL ENGINEER – Fire Protection · HOT JOB Work with a leading EPC specializing in Chemical, Refinery, BioFuels, Petrochemical, Oil and Gas projects. Work with a talented team on projects that will keep you engaged and challenged work/life balance. Great work environment an ...
-
Mechanical Engineer
1 week ago
PEAK Technical Staffing USA Newark, United StatesOur client is seeking talented and forward-thinking Mechanical Engineers for a direct hire opportunity. This position offers the potential to play a strategic role in the company's growth and development. We would want the candidate to have experience in a consulting engineering ...
-
Mechanical Engineer
1 week ago
Penn Technical Staffing Newark, United StatesDetails: A well-established MEP firm located near Newark, DE is seeking a Mechanical Engineer to join their team. The ideal candidate will have 5+ years experience in commercial buildings HVAC & plumbing design. Experience with AutoCAD and Revit is required. Job Requirements · ...
-
Mechanical Engineer
1 day ago
Penn Technical Staffing Newark, United StatesA well-established MEP firm located near Newark, DE is seeking a Mechanical Engineer to join their team. The ideal candidate will have 5+ years experience in commercial buildings HVAC & plumbing design. Experience with AutoCAD and Revit is required. Job Requirements · ...
-
Mechanical Engineer
1 week ago
Penn Technical Staffing Newark, United StatesDetails: A well-established MEP firm located near Newark, DE is seeking a Mechanical Engineer to join their team.The ideal candidate will have 5+ years experience in commercial buildings HVAC & plumbing design. Experience with AutoCAD and Revit is required. Interested candidates ...
-
Mechanical Engineer
1 week ago
Phoenix Industries Newcastle, United StatesThe Berufsgenossenschaft Rohstoffe und chemische Industrie (BG RCI) is part of the German social security system. We are a statutory accident insurance provider and responsible for approximately 1.6 million employees in our nationwide network of member companies. Our main focus i ...
-
Mechanical Engineer
5 days ago
Tech USA Newark, United StatesJob Description · Job DescriptionResponsibilities: · The person we hire will have many of the following skills and job responsibilities: · Technical · Develop project basic data · Work with clients to define and confirm project scopes of work · Perform field surveys · Perform eng ...
-
Junior Mechanical Engineer
1 week ago
Recooty Newark, United StatesA BS or higher degree in Architectural Engineering or Mechanical Engineering is required · 3+ years of mechanical engineering or technical design experience · Working Knowledge of design software (REVIT and AutoCAD) · Knowledge of building mechanical, plumbing, piping, and fire p ...
-
Mechanical Engineering Intern
1 week ago
J & J Staffing Resources Newark, United StatesOur client in Newark, DE is seeking a Mechanical Engineer Summer Intern. This is a paid internship that runs from June to September with a schedule of 8AM – 4:30PM. · Summer Project: Performs a variety of duties following established work instructions to perform the analysis of ...
-
Mechanical Project Engineer
1 week ago
Johnson, Mirmiran, and Thompson Inc. Newark, United StatesJohnson, Mirmiran & Thompson is a dynamic, 100% employee-owned consulting firm of more than 2,000 professionals that provides a full range of multi-disciplined engineering, architecture, information technology, and related services to public agencies and private clients throughou ...
-
Mechanical Engineer/Designer
1 week ago
Synerfac Newark, United StatesDetails: Job ResponsibilitiesOur client, a leading engineering and design consulting firm, is currently seeking a Staff Mechanical Engineer to perform the following, but not limited to:Experience in the design of mechanical/HVAC systems as well as sizing and selection of building ...
-
senior mechanical engineer
5 days ago
Technical Staffing Resources Newark, United StatesTSR is seeking a Sr · Mechanical Engineer to work with one of the largest EPC firms in the country to a support client site in Newark, DE · This is a part time contract position. · Under general supervision, independently applies advanced engineering techniques, makes decision ...
-
Mechanical Design Engineer
1 week ago
Johnson, Mirmiran, and Thompson Inc. Newark, United StatesJohnson, Mirmiran & Thompson is a dynamic, 100% employee-owned consulting firm of more than 2,000 professionals that provides a full range of multi-disciplined engineering, architecture, information technology, and related services to public agencies and private clients throughou ...
-
Senior Mechanical Engineer
4 days ago
Technical Staffing Resources Newark, United StatesTSR is seeking a SrMechanical Engineer to work with one of the largest EPC firms in the country to a support client site in Newark, DEThis is a part time contract position. · Under general supervision, independently applies advanced engineering techniques, makes decisions on eng ...
-
Dual Study Mechanical Engineering
1 week ago
Horizon Ventures Ardentown, United StatesDual Study - Bachelor of Engineering (m/f/d) from You have been fascinated by technical contexts since a young age and have a strong spatial imagination. You like to get an overall picture of a situation in order to question and work on individual building blocks. Technical produ ...
-
AirJoule LLC Newark, United StatesTitle: Senior Product Development Mechanical Engineer · Report: VP Operations · Location: Newark, DE · Position Type: Full Time Exempt · Travel: Occasional · About AirJoule, LLC · Are you passionate about making a difference in the fight against climate change? Then AirJoule ...
-
AirJoule LLC Newark, United StatesTitle: Senior Product Development Mechanical Engineer · Report: VP Operations · Location: Newark, DE · Position Type: Full Time Exempt · Travel: Occasional · About AirJoule, LLC · Are you passionate about making a difference in the fight against climate change? Then AirJoul ...
-
AirJoule LLC Newark, United StatesTitle: · Senior Product Development Mechanical Engineer · Report: · VP Operations · Location: · Newark, DE · Position Type : Full Time Exempt · Travel: · Occasional · About AirJoule, LLC · Are you passionate about making a difference in the fight against climate change? Then ...
-
Designer (m/f/d) Mechanical Engineering
1 week ago
FusionWorks Tavistock, United StatesAt FERCHAU, our clients value our ability to find the best minds for a variety of tasks and to connect people and technologies every day. Join us as an ambitious colleague who, like us, wants to take technologies to the next level. We work on exciting projects for renowned client ...
Lead Mechanical Engineer - Newark, United States - Technical Staffing Resources
Description
Technical Staffing Resources is looking for a Lead Mechanical Engineer to lead our building services design team in Fire Protection, HVAC & Plumbing. The Wilmington Operations Center supports multiple mechanical, HVAC/FP and plumbing design efforts from conceptual design through construction support for Chemical and Biofuel clients. Our clients range from large multi-nationals to start-up companies intensely focused on providing unique solutions which require creative and out of the box thinking. This role is a critical leadership role to manage our building services core group as well as oversee key subcontractors and international design office for work share.
Your experience must include managing small teams in both industrial building HVAC, plumbing systems, laboratory areas as well as process applications such as dust collection systems and vapor management systems. The ideal candidate will also have fire protection experience. In-depth knowledge of industry codes is mandatory. In this position, you will be developing scope of services, work hour estimates and schedules that role up into the overall Mechanical discipline.
Work location is a hybrid schedule; 2-3 days in the office with work assigned from the Newark, DE office and may require occasional travel to the client sites. Will consider REMOTE based on experience.
Functional job responsibilities will include but are not limited to:
Required Education, Experience, & Skills ?
PHYSICAL REQUIREMENTS
