Manufacturing Engineer - Dayton - Team Builder Staffing

    Team Builder Staffing
    Team Builder Staffing Dayton

    1 week ago

    Manufacturing / Mechanical
    Description

    Job Functions

    To perform this position successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required.

    Shall adhere to all safety, health and environmental procedures, policies and practices such as; utilizing personal protective equipment and proper attire in keeping with safety standards.

    Comply with all QMS / EMS / ISO procedures and work instructions as it pertains to the position description.

    Responsibilities

    • Ensures that all Manufacturing Engineering (ME) related activities in the office and on the production floor are carried out in a safe manner. Responsible to address any unsafe practices by any employee that are witnessed in any area on the shop floor or in the office.
    • Verify BOM for parts manufactured on assigned manufacturing cells are accurate and contain proper quantities and weights for each part.
    • Supports the development of packaging and ensures BOMs & packaging instructions are accurate and correct.
    • Prepares project cost estimates, budgets, Returns On Investments (ROIs), and CARs as required
    • Works with Launch Managers, Facility Tooling, and Equipment Suppliers to develop and build assembly fixtures, assembly aids, or other equipment needed in developing manufacturing cell to manufacturing parts.
    • Ensures that work cells are set-up properly and contains the required equipment and information that enables proper number of operators to produce products at the assigned run-rate and to the required specifications.
    • Leads the creation and maintenance of specific process Work Instructions, partnering with the appropriate Business Unit counterpart(s) to ensure accuracy of process.
    • Participate in quality stand-down for customer concerns, Use problem solving tools such as corrective action process, 8D, 5Why, Fishbone Diagrams, Design of Experiment (DOE), to help identify root cause, and support team in implementing permanent corrective actions.
    • Responsible for information boards and the following metrics are being tracked daily and monthly on each cell. Scrap, Downtime, Change-over, Repair/FTY, and Labor Efficiency.

    Qualifications

    • Bachelor's Degree in Engineering (Mechanical preferred)
    • Minimum of 5 years' experience relevant manufacturing engineering; specifically in heat treat operations or combination of formal metallurgical education and experience is required
    • Proven experience in work-cell layouts and in the development of Standard Work.
    • Product Launch / Production Start-up experience including all documentation, testing, data collection, and reporting.
    • Experience leading cost savings and performance improvement initiatives within the manufacturing environment.
    • Working experience with SAP

  • Manufacturing Engineer

    5 days ago

    Only for registered members Dayton

    The position of Manufacturing Engineer at Thaler Defense Systems is responsible for the design, implementation, and optimization of manufacturing systems that meet the stringent quality and compliance standards required in the Aerospace Defense sectors. · ...

  • Manufacturing Engineer

    2 weeks ago

    Only for registered members Dayton $66,000 - $75,000 (USD)

    The manufacturing engineer will work within cross-functional teams to confirm manufacturability of products. They will understand and communicate key information for manufacturability as well as process planning during the design phase. · ...

  • Manufacturing Engineer

    4 weeks ago

    Only for registered members Dayton

    Focus on prototype and new product introduction for medical devices. Utilize hands-on CNC programming or similar machine programming. · ...

  • Manufacturing Engineer

    2 days ago

    Only for registered members Dayton $75,000 - $95,000 (USD)

    Akkodis is seeking a Manufacturing Engineer in Dayton. · The position would be direct hire and on-site. · ...

  • Manufacturing Engineer

    3 weeks ago

    Only for registered members Dayton

    · As a Manufacturing Engineer you will diagnose and troubleshoot issues and support activities that relate to machine or system repair of serial production manufacturing. ...

  • Manufacturing Engineer

    3 weeks ago

    Only for registered members Dayton

    The Manufacturing Engineer supports production operations by improving processes and leading facility projects. · Provide manufacturing engineering support to all plant departments. · Troubleshoot production and maintenance issues related to serial manufacturing. · ...

  • Manufacturing Engineer

    1 week ago

    Only for registered members Dayton

    This position requires a Manufacturing Engineer to perform various tasks including ensuring safe manufacturing practices, addressing unsafe practices, verifying BOMs and packaging instructions, and supporting the development of packaging. · ...

  • Manufacturing Engineer

    1 month ago

    Only for registered members Dayton

    + Manufacturing Engineering applies technical expertise to optimize manufacturing processes and drive continuous improvement.Key Responsibilities: Lead and manage continuous improvement projects that reduce downtime, scrap, and tooling costs while increasing productivity and equi ...

  • Manufacturing Engineer

    1 week ago

    Only for registered members Dayton

    About Creative Foam is seeking a Manufacturing Engineer to administer and control all manufacturing processes related to the manufacture of molded urethane products. · ...

  • Manufacturing Engineer

    3 weeks ago

    Only for registered members Dayton

    We are seeking a highly motivated Manufacturing Engineer to join our team in Dayton, Ohio.This full-time, on-site role focuses on optimizing manufacturing operations, improving production efficiency and driving continuous improvement initiatives across the facility. · ...

  • Manufacturing Engineer

    2 weeks ago

    Only for registered members Dayton, OH

    The manufacturing engineer will work within cross-functional teams to confirm manufacturability of products and communicate key information for manufacturability as well as process planning during the design phase. · ...

  • Manufacturing Engineer

    1 week ago

    Only for registered members Dayton Full time

    About Creative Foam: Since 1969, Creative Foam has been a leading supplier of cellular and non-cellular foam and plastic products for customers in the automotive, medical and composite markets. We have manufacturing locations nation-wide and in Mexico. · To administer and control ...

  • Manufacturing Engineer

    1 day ago

    Only for registered members Dryden Rd, Moraine, OH , USA InternshipSHIP

    Empower Manufacturing es una empresa de maquinaria orientada a los empleados que fabrica ejes personalizados y componentes para nuestros socios confiables utilizando tecnologías punteras e innovadoras. · ...

  • Manufacturing Engineer

    4 weeks ago

    Only for registered members Dayton

    Under minimal direction provides technical expertise to internal/external customers for parts processing for Turnkey processing. · Participates in project kickoff meetingsProvide pre-machine arrival "front end" engineering workEarnsure approval prints are accurate and complete/li ...

  • Manufacturing Engineer

    3 weeks ago

    Only for registered members Dayton

    We are looking for a Manufacturing Engineer to join our manufacturing plant in Dayton, OH. · The incumbent will support our machining department, · providing daily operational support as well as assisting · with the design of new process to better service customers. · Provide equ ...

  • Manufacturing Engineer

    2 weeks ago

    Only for registered members Dayton

    As a Manufacturing Engineer reporting to the Supervisor of Manufacturing Engineering (PTC), you will be responsible to diagnose and troubleshoot issues and support activities that relate to machine or system repair of serial production manufacturing. · ...

  • Manufacturing Engineer

    1 week ago

    Only for registered members Dayton

    The Manufacturing Engineer will administer and control all manufacturing processes related to the manufacture of molded urethane products. The ideal candidate will have experience in chemical process engineering, project management, and tooling development. · Plans and coordinate ...

  • Manufacturing Engineer

    1 month ago

    Only for registered members Dayton Metropolitan Area

    The Manufacturing Engineering applies technical expertise to optimize manufacturing processes and drive continuous improvement. · Serve as project manager for assigned process improvement initiatives aligned with annual plant metrics. · Mentor and support engineering team members ...

  • Manufacturing Engineer

    1 week ago

    Only for registered members Dayton

    We are seeking an enthusiastic and self-motivated Mechanical Engineer with great communication skills to join our team as a Manufacturing Engineer. The successful candidate will have the ability to perform to the requirements listed below. · ...

  • Manufacturing Engineer

    1 day ago

    Only for registered members Moraine, OH, US

    +Responsible for improving pretreatment product quality, reducing the scrap rate in the pretreatment production process, enhancing output. · +Analyze and improve production processes to enhance efficiency and reduce waste · Support the maintenance and optimization of manufacturin ...

Jobs
>
Manufacturing engineer
>
Jobs for Manufacturing engineer in Dayton