- Responsible for lot-by-lot release for all shipments of forgings. Must review each lot for compliance to processing and quality requirements including NDT in all related processing factions.
- Verify proper processing procedures. Compile and furnish all related paperwork to release of forgings for source inspection and shipment. Perform an audit of each lot for complete conforming quality requirements, including dimensional verification. Present entire package to source inspection for final approval.
- Complete dimensional over inspection by using standard inspection methods. (height gage, mics, calipers, part specific ID/OD gages). Interpret customer blueprints and notes to ensure proper measurements are to blueprint and understand coordinate measurement machine (CMM) reports for conformance.
- Work with source inspection on specific problems and coordinate activity with source inspection and responsible supervision, regarding related process and quality problems.
- Detect and report defective parts, improper operation and unusual conditions to proper supervision. Maintain work area equipment in a clean and orderly 6S condition. Follow prescribed safety regulations.
- Perform a variety of forging and inspection paperwork following standard accepted practices and process requirements.
- Considerable judgment required to interpret lot conformance, complete process conformance, quality specifications and requirements, and quality purchase order/shipping requirements, and related decisions and maintain proper records.
- DSQR support (Designated Supplier Quality Representative)
- Etch out support (Daily physical and administrative transfer of parts to supporting department)
- Certification support (Review of entire customer packet of information)
- Material and Shipping support (Physical and Administrative functions of shipping. Including Export Compliance Items)
- Inventory support (Finished Goods/WIP/MRB)
- Other duties as assigned by your manager.
- Performs preparation techniques of Metallurgical mounts such as grinding, cutting, polishing and etching.
- Reads and understands drawings and specifications for correct test requirements, procedures and sampling plans.
- Able to perform Metallurgical examinations per specification and procedure.
- LEI overcheck & Grain size (NDT Overcheck and Metallurgical overcheck support).
- Metallurgical knowledge of Ni, Ti and Fe microstructures is a plus
- Complies with all environmental safe practices and regulations.
- Has knowledge of MSDS, labeling and storage requirements for chemicals.
- Be a support to Metallurgy/Engineering studies in carrying out metallographic analysis and guided data collection.
- Sufficient computer skills working with Microsoft files and programs.
- Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.
- Strong organizational skills and the ability to coordinate and prioritize multiple tasks.
- Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments.
- Constant exposure to indoor & outdoor manufacturing environment.
- Constant exposure to moderate noise.
- Working conditions may include small spaces, dust, fumes/odors, and hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfaces.
- Ability to travel as required.
- Initial training in Houston, TX may be required depending on the candidate's existing qualifications.
- High school diploma or GED required. Two-year technical associate degree preferred. One to two years of experience as a quality inspector preferably in the aerospace industry.
- Prefer 3-4 years of related metallography experience
- Familiar with equipment in Metallography Laboratory.
- Requires working knowledge of shop mathematics.
- Working knowledge of blueprints, complex drawings, and specifications.
- Working knowledge of Microsoft Office, such as Excel.
- Working knowledge of precision measuring instruments.
- Working knowledge of inspection methods and techniques, manufacturing methods and requirements.
- Professional communication and demeanor as this position is the face of Wyman Gordon with customer.
- Demonstrated written and verbal communication skills as this position will communicate directly to customer.
- Must successfully complete and maintain SAE DPRV certification to include written and practical exam.
- Must successfully complete and maintain customer grain size evaluation certifications.
- Metallurgical knowledge is a plus.
- Additional responsibilities as defined and assigned by supervisor or manager.
- Ability to lift up to thirty-five pounds on a repetitive basis.
- Must be able to stand, walk, bend, squat climb, kneel, twist and work at heights on an intermittent basis for twelve hours a day.
- Ability to stand and walk on concrete surfaces for extended periods of time.
- Must be able to work with and around forklifts and hazardous machinery.
- Requires hand manipulation including simple grasping, power grasping, pushing and pulling of materials and fine manipulation.
- Working conditions may include small spaces, dust, fumes/odors, and hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfaces.
- Ability to work holidays, weekends and overtime as scheduled.
- Must be able to wear all required Personal Protective Equipment.
- Must be able to meet or exceed the following visual acuity requirements:
-
Wyman Gordon Dillon, United States Full timeCompany Profile · With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, ...
-
Wyman Gordon Dillon, United States Full timeCompany Profile · With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, ...
-
Precision Castparts Corp Dillon, United StatesThis is a dual-function role: metallographer and DSQR (Designated Supplier Quality Representative). Workload division is based upon business needs week-by-week as directed by their supervisor. DSQR Duties and ResponsibilitiesPrepare customer source inspection package. Interpret a ...
-
Wyman Gordon Dillon, United StatesCompany Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, cr ...
-
Precision Castparts Corp Dillon, United StatesNOTE: please ensure you are providing a resume when applying.This is a dual-function role: metallographer and DSQR (Designated Supplier Quality Representative). Workload division is based upon business needs week-by-week as directed by their supervisor. DSQR Duties and Responsibi ...
-
Wyman Gordon Dillon, United StatesCompany Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, cr ...
-
Precision Castparts Corp Dillon, United StatesCountry · United States of America · State / County · South Carolina · City · Dillon · Division · Wyman Gordon · Company · Dillon · Function · Quality · Workplace Type · On-Site · Position type · Full Time · Opportunity ID · 12630 · Company Profile · With more than 120 operations ...
-
Sales representative
2 days ago
NovaWorks Dillon, United StatesSales Representative (m/f/d) · Welcome to JobImpulse · We are an experienced international staffing agency with an exceptional success story since our founding in 2006. Today, we have over 53 offices in 13 countries and employ more than 9,300 people worldwide. · We are looking f ...
-
Salesperson with cashier duties
3 days ago
Titan Industries Little Rock, SC, United States Freelance**Job Description:** · famila Nordost is an expanding and dynamic retail company that belongs to the owner-managed Bartels-Langness group based in Kiel. famila operates over 80 department stores in the northern German region and employs over 7,000 employees, including 500 apprent ...
-
RN, Home Care
1 week ago
BAYADA Home Health Care Lumberton, United StatesCome for the Flexibility, Stay for the Culture · Needing more 'life' in your work-life balance? Apply to our talent network today · BAYADA Offers Our Registered Nurses: · One on one care · Flexible scheduling based on your preferences · Weekly pay · Preventive Care Coverage for A ...
-
Dentist – DDS
2 weeks ago
Aspen Dental Florence, United States Full timeThis opening is a lead dentist role, Managing Clinical Director. · Up to $20000 Sign On Bonus and $7500 Relocation. · At Aspen Dental, we put You first, offering the financial security and job stability that comes with working with a world-class Dental Service Organization (DSO). ...
-
Dialysis Staff Home Therapy Registered Nurse
2 weeks ago
Fresenius Medical Care Lumberton, United States Full timePURPOSE AND SCOPE: · The professional registered nurse Home Therapies RN CAP 2 may be an entry level designation into the Clinical Advancement Program (CAP) for new employees who meet the RN CAP 2 criteria or attained through advancement from RN CAP 1. This position is accountab ...
-
Registered Nurse
1 week ago
Fresenius Medical Care Lumberton, United States Full timePOSITION FEATURES:Schedule: 12-Hour Shift (3 days a week) or 10-hour Shift (4 days a week) · No Sunday or Overnight Shifts · RN—Clinical · About this role: As a Dialysis Clinic Registered Nurse (RN) with Fresenius Medical Care, you will be part of a close-knit, collaborative team ...
-
Outpatient Registered Nurse
1 week ago
Fresenius Medical Care Florence, United States Full timePOSITION FEATURES: · Willing to train or Training Provided · PURPOSE AND SCOPE: · The professional registered nurse Outpatient RN CAP 1 is an entry level designation into the Clinical Advancement Program (CAP). This position is accountable and responsible for the provision and c ...
-
Lumberton Independent School District Lumberton, United States**Primary Purpose**: · Under moderate supervision, coordinate the collection and reporting of campus Public Education Information Management System (PEIMS) data. · Under mínimal supervision, coordinate the maintenance of student academic records at the campus level · Monitor stud ...
-
Sales Representative
1 week ago
High & Tight Roofing Lumberton, United States**Join Our Winning Team: Roofing Sales Superstars Wanted** · Are you ready to reach new heights in your career? Excited about the opportunity to work outside the typical office environment? If yes, come and join our dynamic sales team at High & Tight Roofing We are currently look ...
-
Locum Physician
3 weeks ago
Delta Locum Tenens Dillon, United States contractCOVERAGE REQUIREMENTS OB hospitalist (OB)Aug 5 at 8a through Oct 28 at 8a · POSITION DETAILS OB hospitalist (OB)24-hour call · NP will cover clinic and might ask locum to cover pt they are not able to handle (rare) · Daily rounding, 1-3pts/day · Average deliveries per day 1-3 · V ...
-
Locum Physician
1 week ago
Delta Locum Tenens Dillon, United StatesCOVERAGE REQUIREMENTS OB hospitalist (OB) POSITION DETAILS OB hospitalist (OB) · August 12th @ 8:00am thru August 16th @ 8:00am · September 3rd @ 8:00am thru September 6th @ 8:00am · September 9th @ 8:00am thru September 12th @ 8:00am · 24-hour call · NP will cover clinic and mig ...
-
McLeod Health Dillon, United States1. Maintains a professional image and exhibits excellent customer relations to patients, visitors, physicians, and co- · workers in accordance with our Service Excellence Standards and Core Values. · 2. Performs any other duties assigned by Clinical Supervisor or Office Manager · ...
-
Physician Office LPN, McLeod Pediatrics
1 week ago
McLeod Health Dillon, United States* Maintains a professional image and exhibits excellent customer relations to patients, visitors, physicians, and co-workers in accordance with our Service Excellence Standards and Core Values. · * Assists the physician in assessing the needs of patients based on data collected t ...
Metallographer / Designated Supplier Quality Representative (Ultrasonic NDT) - Dillon, United States - Precision Castparts Corp
Description
NOTE:
please ensure you are providing a resume when applying.
This is a dual-function role: metallographer and DSQR (Designated Supplier Quality Representative). Workload division is based upon business needs week-by-week as directed by their supervisor.
DSQR Duties and Responsibilities
Prepare customer source inspection package. Interpret all purchase orders and quality data requirements. Process, procedure, and related quality customer requirements.
Review all manufacturing sequences of operations to ensure that all operations have been performed in compliance with customer and in-house requirements.
Redirect parts for re-inspection and reprocessing as necessary.Metallographer Duties and Responsibilities
Working Conditions
Education & Experience
Physical Requirements
o Near Vision:
Tumbling E in accordance with ISO 18490
20/25 (Snellen) at 16" (40.64cm) +/- 1" (2.54cm) in at least one eye, natural or corrected.
Jaeger No.1 at not less than 12" (30.48cm) in at least one eye, natural or corrected.
o Color Perception:
Individual shall be capable of adequately distinguishing and differentiating colors used in the process involved.
/*generated inline style */
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
/*generated inline style */ This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees.
/*generated inline style */
