Jobs
>
Port Arthur

    Outside Machinist 1st Class - Port Arthur, United States - Gulf Copper & Mfg. Corp. and Sabine Surveyors Ltd.

    Gulf Copper & Mfg. Corp. and Sabine Surveyors Ltd.
    Gulf Copper & Mfg. Corp. and Sabine Surveyors Ltd. Port Arthur, United States

    2 weeks ago

    Default job background
    Description

    Job Description

    Job Description

    Outside Machinist 1st Class

    GC Central Yard is currently seeking an Outside Machinist 1st Class. This project will be located in Orange, TX.

    Duration & Hours: Project will be for 60 days working a minimum of 40 hrs.

    *TWIC is highly preferred*

    INSTRUCTIONS ON APPLYING: Head to > Apply for this position

    Essential Duties and Responsibilities:

    This position is responsible for the following: Other duties may be assigned.

    1. Must be able to understand and perform the disassembly, repair, and reassembly of the following using safe rigging and handling practices:

    a) Steam Turbines

    b) Centrifugal Pumps

    c) Reciprocating and Vertical Pumps

    d) Gear Boxes

    e) Marine drive trains

    2. Align machines and equipment, to specified tolerances with minimal supervision, using hoists, jacks, hand tools, squares, rules, micrometers and indicators.

    3. Lay out, drill, and tap mounting holes, using measuring instruments,

    4. Level bedplates and establish centerline, using straightedge, levels, and transit.

    5. Fit bushings, sleeves, rings, liners, gears, and wheels to specified components, using interference fit by means of pressing or portable gas heating equipment and or cryogenics.

    6. Use precision measuring instruments to make measurements within specified tolerances.

    7. Write condition reports for each job performed.

    Required Education & Experience:

    1. High School Diploma and/or one year certificate from college or technical school preferred.

    2. Industrial and/or marine equipment repair experience:

    · 1st Class: 3-5 years

    · 2nd Class: 1-3 years

    Working Conditions:

    1. Open-air conditions such as noisy, hot, cold, etc.

    2. Must wear hearing, eye, and head protection.

    3. Some climbing (100 feet) and lifting (50 lbs.) involved.

    4. Working with hot and sometimes hazardous materials.

    5. Aboard ships, both on and offshore.

    6. Some travel required.

    Necessary Equipment Operation:

    1. Micrometer

    2. Feeler Gauges

    3. Hydraulic Power units.

    4. Rigging

    5. Power Tools

    6. Hydraulic jacks and other lifting equipment

    Special Skills:

    1. Ability to read and interpret blueprints, sketches, drawings and technical manuals in order to reassemble and align according to specifications.

    2. Reasonable knowledge of machinery, bearings, fasteners, seals, mechanical applications and their tolerance requirements.

    3. Perform basic mathematical functions.

    4. Excellent interpersonal and communication skills.

    5. High performance and a strong team player.

    6. Ability to work under deadlines and schedule pressures with minimum supervision.

    7. Commitment to company values and safety program

    The statements herein are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as a comprehensive list of all responsibilities, duties, and skills required of assigned personnel.

    Powered by JazzHR

    a5J1SpEFXY

  • Gulf Copper & Mfg. Corp. and Sabine Surveyors Ltd.

    Inside Machinist 1st Class

    1 week ago

    Gulf Copper & Mfg. Corp. and Sabine Surveyors Ltd. Port Arthur, United States

    Inside Machinist Gulf Copper & Manufacturing is seeking an experienced Inside Machinist for our yard in Port Arthur, TX. INSTRUCTIONS ON APPLYING: Head to > Select "Apply for this position"Essential Duties and Responsibilities:This position is responsible for the following: Othe ...

  • Gulf Copper & Mfg. Corp. and Sabine Surveyors Ltd.

    Outside Machinist 1st Class

    1 week ago

    Gulf Copper & Mfg. Corp. and Sabine Surveyors Ltd. Port Arthur, United States

    Outside Machinist 1st ClassGC Central Yard is currently seeking an Outside Machinist 1st Class. This project will be located in Orange, TX.Duration & Hours: Project will be for 60 days working a minimum of 40 hrs. *TWIC is highly preferred* INSTRUCTIONS ON APPLYING: Head to > Ap ...

  • Gulf Copper & Mfg. Corp. and Sabine Surveyors Ltd.

    Outside Machinist 1st Class

    1 week ago

    Gulf Copper & Mfg. Corp. and Sabine Surveyors Ltd. Port Arthur, United States

    Outside Machinist 1st Class · GC Central Yard is currently seeking an Outside Machinist 1st Class. This project will be located in Orange, TX. · Duration & Hours: Project will be for 60 days working a minimum of 40 hrs. · *TWIC is highly preferred* · INSTRUCTIONS ON APPLYING: ...

  • Gulf Copper & Mfg. Corp. and Sabine Surveyors Ltd.

    Outside Machinist 1st Class

    2 weeks ago

    Gulf Copper & Mfg. Corp. and Sabine Surveyors Ltd. Port Arthur, United States

    Job Description · Job DescriptionOutside Machinist 1st Class · GC Central Yard is currently seeking Outside Machinist This project will be located in Port Arthur, TX. · Duration & Hours: Project will be for 60 days working 6/10's. · INSTRUCTIONS ON APPLYING: Head to > Apply for ...

  • Cloeren Incorporated

    Manufacturing Inspector

    3 weeks ago

    Cloeren Incorporated Nederland, TX, United States

    The Manufacturing Inspector, located in a climate-controlled facility in Orange, TX, is committed to supporting Cloeren Incorporated continue to be the leader in extrusion die and feedblock quality and technology by using various gauges and other tolerance equipment to make sure ...

  • Cloeren Incorporated

    Manufacturing Inspector

    1 week ago

    Cloeren Incorporated Nederland, United States

    The Manufacturing Inspector, located in a climate-controlled facility in Orange, TX, is committed to supporting Cloeren Incorporated continue to be the leader in extrusion die and feedblock quality and technology by using various gauges and other tolerance equipment to make sure ...

  • Cloeren Incorporated

    Manufacturing Inspector

    3 weeks ago

    Cloeren Incorporated Nederland, TX, United States

    The Manufacturing Inspector, located in a climate-controlled facility in Orange, TX, is committed to supporting Cloeren Incorporated continue to be the leader in extrusion die and feedblock quality and technology by using various gauges and other tolerance equipment to make sure ...

  • Cloeren

    Manufacturing Inspector

    2 weeks ago

    Cloeren Nederland, United States

    The Manufacturing Inspector, located in a climate-controlled facility in Orange, TX, is committed to supporting Cloeren Incorporated continue to be the leader in extrusion die and feedblock quality and technology by using various gauges and other tolerance equipment to make sure ...

  • Cloeren Incorporated

    Manufacturing Inspector

    2 weeks ago

    Cloeren Incorporated Nederland, TX, United States

    The Manufacturing Inspector, located in a climate-controlled facility in Orange, TX, is committed to supporting Cloeren Incorporated continue to be the leader in extrusion die and feedblock quality and technology by using various gauges and other tolerance equipment to make sure ...

  • Cloeren Inc.

    CNC Machinist

    5 days ago

    Cloeren Inc. Orange, United States

    Job Description · Description: · The Computer Numerical Control (CNC) Machinist, located in a climate-controlled facility in Orange, TX, is committed to supporting Cloeren Incorporated continue to be the leader in extrusion die and feedblock quality and technology by operating CN ...

  • Cloeren Inc.

    CNC Machinist

    4 days ago

    Cloeren Inc. Orange, United States

    Job Description · Description: · The Computer Numerical Control (CNC) Machinist, located in a climate-controlled facility in Orange, TX, is committed to supporting Cloeren Incorporated continue to be the leader in extrusion die and feedblock quality and technology by operating CN ...

  • Cloeren Inc.

    CNC Machinist

    1 week ago

    Cloeren Inc. Orange, United States

    Job Description · Description: · The Computer Numerical Control (CNC) Machinist, located in a climate-controlled facility in Orange, TX, is committed to supporting Cloeren Incorporated continue to be the leader in extrusion die and feedblock quality and technology by operating CN ...

  • Cloeren Inc.

    CNC Machinist

    1 week ago

    Cloeren Inc. Orange, United States

    Job Description · Description: · The Computer Numerical Control (CNC) Machinist, located in a climate-controlled facility in Orange, TX, is committed to supporting Cloeren Incorporated continue to be the leader in extrusion die and feedblock quality and technology by operating CN ...

  • Cloeren

    CNC Machinist

    1 week ago

    Cloeren Orange, United States

    : The Computer Numerical Control (CNC) Machinist, located in a climate-controlled facility in Orange, TX, is committed to supporting Cloeren Incorporated continue to be the leader in extrusion die and feedblock quality and technology by operating CNC machines in a safe and produc ...

  • Cloeren Inc.

    Machinist

    1 week ago

    Cloeren Inc. Orange, United States

    Job Description · Description: · JOB TYPE: · Full Time · POSITION SUMMARY: · If you enjoy working with world class machine tool equipment and want to help our customers build a better world with our state-of-the-art extrusion equipment, we have a great opportunity for you. Workin ...

  • Cloeren Inc.

    Production CNC Machinist

    1 week ago

    Cloeren Inc. Orange, TX, United States

    The Computer Numerical Control (CNC) Machinist, located in a climate-controlled facility in Orange, TX, is committed to supporting Cloeren Incorporated continue to be the leader in extrusion die and feedblock quality and technology by operating CNC machines in a safe and producti ...

  • Cloeren Incorporated

    Manufacturing Inspector

    1 week ago

    Cloeren Incorporated Beaumont, United States

    The Manufacturing Inspector, located in a climate-controlled facility in Orange, TX, is committed to supporting Cloeren Incorporated continue to be the leader in extrusion die and feedblock quality and technology by using various gauges and other tolerance equipment to make sure ...

  • Cloeren

    CNC Machinist

    1 week ago

    Cloeren Orange, United States

    : The Computer Numerical Control (CNC) Machinist, located in a climate-controlled facility in Orange, TX, is committed to supporting Cloeren Incorporated continue to be the leader in extrusion die and feedblock quality and technology by operating CNC machines in a safe and produc ...

  • Cloeren

    CNC Machinist

    3 days ago

    Cloeren Orange, United States

    : The Computer Numerical Control (CNC) Machinist, located in a climate-controlled facility in Orange, TX, is committed to supporting Cloeren Incorporated continue to be the leader in extrusion die and feedblock quality and technology by operating CNC machines in a safe and produc ...

  • Cloeren Inc.

    CNC Machinist

    1 week ago

    Cloeren Inc. Orange, TX, United States

    : · The Computer Numerical Control (CNC) Machinist, located in a climate-controlled facility in Orange, TX, is committed to supporting Cloeren Incorporated continue to be the leader in extrusion die and feedblock quality and technology by operating CNC machines in a safe and pro ...