-
Welder-fabricator/Soldador y fabricador
3 weeks ago
David Marroquin Los Angeles, United StatesJob Description · Job DescriptionWelding business searching for Ornamental fabricator welder with experience in welding and fabricating fences, gates, doors, handrails, etc. Minimum 5 years experience. · No contractors or subcontractors. Only laborers. · Pay is commensurate with ...
-
Welder
2 weeks ago
Amada America, Inc. La Mirada, United StatesJob Description · Job DescriptionThis position is responsible for fabricating parts according to instructions and within specified time frame, using the appropriate tools and/or equipment according to safety and quality standards, as well as carrying out any other duties as direc ...
-
Welder Helper
23 hours ago
ISAT - International Seismic Application Technology La Mirada, United StatesJob Description · Job DescriptionImmediate opening for Welder Helper · Our employees are thriving both inside and outside of the office. We are growing faster than ever and it's not because of what we do, but how we do it. It's simple, our employees are our greatest asset. We val ...
-
Welder
2 weeks ago
Aerotek Santa Fe Springs, United StatesAerotek - JobID: JP [Fabricator] As a Welder at Aerotek, you'll: Require reading blueprints to determine locations and quantities of required materials; Fabricate metal parts such as steel and aluminum frames or beams; Perform other duties as assigned...Hiring Immediately >> ...
-
MIG Welder
4 weeks ago
Aerotek La Mirada, United States**Description:**Mig welders needed for day shift (8am-5pm) in La Mirada and Brea, CA. Looking for candidates ideally experience welding 16 gauge to 1 inch thick sheet metal. Miller Welding Machine set up, also experienced with vertical welding.-This position is responsible for we ...
-
Welder
3 weeks ago
Doerfer Corporation Santa Fe Springs, United StatesSummary · The position of Welder will be responsible for performing complex, welding/fabrication operations, interpreting blueprints and drawings, setting up and operating all welding equipment and hand tools, polishing and cleaning parts, inspecting parts, using material handli ...
-
Welder
2 weeks ago
Kinetic Personnel Group Santa Fe Springs, United StatesJob Description · Job DescriptionOur client, a leader in the design, fabrication, and installation of custom process equipment located in Santa Fe Springs, CA is actively seeking Welders . · Responsibilities: · Produce high-quality welds for stainless and carbon steel structures ...
-
Welder
3 weeks ago
SIMOS La Mirada, United States· We are looking for a Welder in the Mirada, CA area. This is a temp-to-hire position with great pay and benefits. Send your resume to the RPS Recruiter at [email protected] to learn more about this position. · Perks & BenefitsWeekly paychecks · Direct Deposit or Cash Card pay ...
-
Welder
4 weeks ago
Aerotek Santa Fe Springs, United States**Description:**This facility is a custom fabrication shop.MUST HAVE AT LEAST 3-5 YEARS WORK EXPERIENCEMust be very comfortable with vertical flux core welding**Skills:**Flux Core welding, MIG welding, TIG welding, welding blueprints, welding symbols, metal fabrication**Shift:**1 ...
-
Welder
3 weeks ago
AMADA La Mirada, United StatesThis position is responsible for fabricating parts according to instructions and within specified time frame, using the appropriate tools and/or equipment according to safety and quality standards, as well as carrying out any other duties as directed by Team Leader or Supervisor. ...
-
Welder
3 weeks ago
Tradesmen International Cypress, United StatesTradesmen International - JobID: 691C054D69284C1883C3FBB3F179AD6B [Fabricator] As a Welder at Tradesmen International, you'll: Read blueprints and other engineering drawings in order to perform efficiently; Read and interrupt technical manuals as applicable; Demonstrate knowledge ...
-
MIG Welder
2 weeks ago
Aerotek La Mirada, United StatesAerotek - JobID: JP [Fabricator] As a Welder at Aerotek, you'll: Require reading blueprints to determine locations and quantities of required materials; Fabricate metal parts such as steel and aluminum frames or beams; Perform other duties as assigned...Hiring Immediately >> ...
-
MIG Welder
3 weeks ago
Aerotek La Mirada, United States**Description:** · Mig welders needed for day shift (8am-5pm) in La Mirada and Brea, CA. Looking for candidates ideally experience welding 16 gauge to 1 inch thick sheet metal. Miller Welding Machine set up, also experienced with vertical welding. · -This position is responsibl ...
-
Welder
4 weeks ago
Cascade Pump Santa Fe Springs, United StatesWelder · Cascade Pump company is a manufacture of large industrial pumps, and has been in business fir over 75 years. As a Welder you will be responsible for welding Flanges to Columns, base plates, and fitting Elbows to columns/pedal stools. · Duties and Responsibilities: · M ...
-
MIG Welder
2 weeks ago
Aerotek La Mirada, United States**Description:** · Two Mig welders needed for the day shift (8am-5pm) in large manufacturing facility in La Mirada and Brea, CA. Looking for experience ideally welding 16 gauge to 1 inch thick sheet metal and able to use Miller Welding machines. Pay will be between $25-$30 an ho ...
-
MAG welder
1 week ago
Velocity Enterprises Huntington, United StatesWe are looking for a qualified MIG welder who is responsible for the proper execution of welding work for our client. Apply now · These are your tasks as a MIG welder · Performing welding work according to technical drawings and specifications · Welding of components and structur ...
-
Welder
3 weeks ago
Kinetic Personnel Group, Inc Santa Fe Springs, United StatesOur client, a leader in the design, fabrication, and installation of custom process equipment located in Santa Fe Springs, CA is actively seeking Welders . · *Responsibilities:* · * Produce high-quality welds for stainless and carbon steel structures and pipes. · * Expertly weld ...
-
Welder Fabricator
3 weeks ago
ISAT - International Seismic Application Technology La Mirada, United StatesJob Description · Job DescriptionImmediate opening for Welder / Fabricator · Our employees are thriving both inside and outside of the office. We are growing faster than ever and it's not because of what we do, but how we do it. It's simple, our employees are our greatest asset. ...
-
MIG Welder
2 weeks ago
Aerotek La Mirada, United States Contract to RegularAPPLY TODAY AND INTERVIEW TOMORROW ENTRY LEVEL WELDERS AND EXPERIENCED WELDERS NEEDED · Description: · Mig welders needed for day shift (8am-5pm) in La Mirada and Brea, CA. Looking for candidates ideally with sheet metal welding experience. · -This position is responsible for we ...
-
MIG Welder
3 days ago
Aerotek La Mirada, United States Contract to RegularDescription: · Mig welders needed for day shift (8am-5pm) in La Mirada and Brea, CA. Looking for candidates ideally with sheet metal welding experience. · -This position is responsible for welding accurate, quality parts according to instructions and within specified time frame, ...
Welder - La Mirada, United States - Amada America , Inc.
Description
This position is responsible for fabricating parts according to instructions and within specified time frame, using the appropriate tools and/or equipment according to safety and quality standards, as well as carrying out any other duties as directed by Team Leader or Supervisor.
ESSENTIAL JOB FUNCTIONS:
Primary Job Functions Weight : 70 %
1) Performs Troubleshooting and Fabrication Duties
by fabricating parts as directed by Team Leader or Supervisor; by troubleshooting fabrication problems; by requesting parts and/or tools, when necessary; by performing accurate, quality fabrication in a timely manner; by performing adjustments needed to ensure factory settings and specifications; by using schematics, engineering documentation, and precedent to fabricating parts; and by submitting fabricated parts to Quality Control, appropriate Team member, or Department.
2) Maintains Tools, Equipment, and Work Spaceby following instructions on tool and equipment use; by reporting problems, repairs needed, and repairs performed to Team Leader or Supervisor; by performing repairs as needed; by regularly cleaning tools, equipment, and work space throughout shift; by cleaning and detailing tools, equipment, and work space at the end of every shift; and by following instructions regarding routine maintenance and/or treatment for tools, equipment, and work space.
Secondary Job Functions Weight: 20 %1) Keeps Management Informed
by reporting problems immediately to management verbally or in writing, in order to avoid confusion and problems.
2) Manages Time and Resources
by using Company resources in order to maximize productivity and accomplish tasks on time.
3) Complies with Established Procedures
by learning and following all policies and procedures of the Department in order to work efficiently and to meet the expectations of the Company.
Common Job Functions Weight: 10 %1) Contributes to the Team Effort
by being flexible in work assignments; by covering for other Staff as needed; and by accomplishing related tasks when reasonably requested.
2) Maintains Professional and Technical Knowledgeby attaining job-related certification; by keeping up on industry trends; and by applying that knowledge to the job.
3) Acts on Constructive Feedback
by being open to feedback from peers, supervisors, and clients.
4) Improves Processes
by examining departmental work processes, research procedures, administrative procedures, etc.; and by recommending changes where appropriate.
5) Upholds Work Standards
by maintaining professional conduct and appearance; by realizing ones own limitations and to seek assistance when needed; and by using established communication channels.
ESSENTIAL JOB REQUIREMENTS:
Physical Requirements & Working Environment
While performing the duties of this job, the Staff Member is regularly required to sit and talk or hear.
The Staff Member is occasionally required to stand, walk, use hands to pick-up, handle, or feel, and reach with hands and arms.
The Staff Member must occasionally lift and/or move up to 40 pounds.Specific vision abilities required by this job include close vision and ability to adjust focus.
The noise level in the work environment is usually noisy (i.e., working with powered tools, moving parts, and heavy machinery).
The Staff Member may be required to work beyond normal business hours when necessary.NON-
ESSENTIAL JOB FUNCTIONS:
Demonstrate commitment to an Injury-Free Environment by actively participating in company safety programs.
Comply with all aspects of the corporate environmental, health, and safety program.
PAY RATE:
$24-$29HR
Experience/Minimum Qualifications Needed
Language Skills
Ability to effectively respond to questions from Management, Staff, clients, and the general public in English.
Ability to communicate verbally and in writing to individuals and groups in English.
Mathematical Skills
Ability to perform addition, subtraction, multiplication, and division.
Reasoning Skills
Ability to apply knowledge and sense of understanding to carry-out detailed written or oral instructions.
Ability to deal with problems involving a few concrete variable in standardized situations.
Other Skills
Must be tactful, mature, flexible, and able to successfully respond to multiple work pressures.
Education
High school education; or up to one month related experience or training; or equivalent combination of education and experience.
Experience working in a manufacturing and production preferred.
Experience driving forklift and using measuring tools preferred.
ISO and SAP experience a plus
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant.
However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractors legal duty to furnish information.
41 CFR c)