- Install, repair, maintain, move, align, erect, or install production/facility/electrical equipment. This work may be performed from written/verbal instructions, drawings, samples, or sketches, often to close tolerances. This work may be performed using hand tools, power tools and electrical maintenance knowledge.
- Design, program, repair and maintain Programmable Logic Controllers (PLC) Systems.
- Complete work orders, PM rounds, repairs, and general maintenance.
- Diagnose trouble and determine extent of repairs necessary; repair, refit, or replace parts.
- Reorder supplies and equipment, as needed.
- Lay out carpentry work and specify materials; includes finishing and masonry work.
- Notify Supervisor or designated personnel of any irregularities or problems encountered with supplies, machinery, or processes.
- Participate in training sessions, seminars, and continual improvement opportunities.
- Safety is a personal responsibility; verify that area and equipment are safe before proceeding with duties.
- Check all safety equipment; follow all facility safety rules and procedures; wear all personal protective equipment (PPE) required.
- Lock-out/Tag-out procedures must be adhered to when equipment is down for repair or cleaning.
- Ability to clean tools and maintain identified tool boards while keeping workstation and surrounding area clean and organized.
- Keep equipment in safe operating condition, report problems to Maintenance department.
- Participate in training of new Associates as directed by the Supervisor
- Perform any other project/task as assigned by Management.
- High School diploma or equivalent is desired. Associate Degree or Technical degree in Electrical Engineering, Mechanical Engineering is preferred. Successful completion of Competency Assessment may be considered in lieu of education.
- Three (3) years industrial maintenance experience in manufacturing preferred.
- Ability to read and comprehend blueprints, service manuals and maintenance records.
- Understanding of mechanics, hydraulics, electrical and electronic control systems, pneumatics, HVAC, rubber industry production equipment internal combustion engines, single and three phase electric motors.
- Requires the ability to perform basic math (i.e., addition, subtraction, multiplication, and division).
- Ability to read a tape measure.
- Strong computer/systems skills – MS Office (Excel/Word/Outlook). Familiarity of E-Maintenance, a plus.
- Good written, verbal, and interpersonal communication skills.
- Strong cooperation and collaboration skills.
- Strong analytical and diagnostic skills
- Strong organizational skills with the ability to handle multiple tasks and meet tight deadlines
- High degree of concentration with attention to detail, high energy, and self-motivation.
- Ability to manage demands and deal with frequent changes, delays, or unexpected events through organization, prioritization, and problem-solving skills.
-
Maintenance Technician
2 weeks ago
Provision People Dyersburg, United StatesJob Description · Job DescriptionRelocation assistance is provided to the qualified candidates · Summary: · Our award-winning client is seeking a Maintenance Technician to join their team. The Maintenance Technician ensures machinery uptime by conducting repairs and preventative ...
-
Maintenance Technician
2 weeks ago
Job Juncture Dyersburg, United StatesJob Description · Job description: The Maintenance Technician is involved in equipment repair and preventive maintenance to prevent downtime of machinery consistent with company goals, business unit Key Performance Indicators (KPI's) to include safety, quality, efficiency, produc ...
-
Maintenance Technician
1 day ago
William H Hunter Recruiting Dyersburg, United StatesJob Description · Job DescriptionSeeking an experienced Industrial Maintenance Technician to maintain production equipment in the plant. Excellent pay and benefits. · Responsibilities: · Ensures operation of machinery and mechanical equipment by completing preventive maintenance ...
-
Bottling Maintenance Technician
6 days ago
Image Associates Inc. Dyersburg, United StatesFood manufacturer in Northwest Tennessee needs Maintenance Technicians who are familiar with Krones VarioDrive Belt and precise positioning of containers. I am looking for someone who will inspect, test, troubleshoot, calibrate, repair, and install food or beverage packaging mach ...
-
Maintenance Technician
2 weeks ago
Frauenshuh Hospitality Dyersburg, United StatesJob Description · Job Description · Position Summary: Execute all aspects of building grounds and equipment maintenance and repairs using standards set by Fourteen Foods and Dairy Queen International. Travel to various assigned locations, some overnight travel will be necessary. ...
-
Maintenance Technician
1 week ago
Provision People Dyersburg, United StatesRelocation assistance is provided to qualified candidates · Summary: · Our award-winning client is seeking a Maintenance Technician to join their team. The Maintenance Technician ensures machinery uptime by conducting repairs and preventative maintenance, aligning with company o ...
-
Maintenance Technician
3 weeks ago
William H Hunter Recruiting Dyersburg, United StatesSeeking an experienced Industrial Maintenance Technician to maintain production equipment in the plant. Excellent pay and benefits. · Responsibilities: · * Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements.. · * Locates sour ...
-
Maintenance Technician
2 weeks ago
Tyson Foods, Inc. Newbern, United States Full timeThis position is responsible for troubleshooting, maintaining, and repairing all equipment and company assets while maintaining a safe work environment and adhering to Tyson policies and procedures. RESPONSIBILITIES:Responsible for upkeep of the prod Maintenance Technician, Maint ...
-
Maintenance Technician
2 weeks ago
Tyson Foods Newbern, United States Full timeJob Details: · This position starts at $22.20/hr, but could be more based on experience, with a shift increase for second and third shift and potential for overtime. We currently have a position open for second shift. · If you are looking to make an impact in a meaningful way, jo ...
-
Maintenance Technician
3 weeks ago
NSK Lenox, United StatesJob Description · Job Title: Maintenance Technician · Pay Range: $20/hr - $35/hr (Depending on Experience) · Location: Dyersburg, TN · Job Type: Full-Time · Shift: Shift is 6pm- 6:30am · 2-2-3 schedule · Work 2 days, off 2 days, work 3 days, off 2 days · Job Category: Manufacturi ...
-
Maintenance Technician
4 weeks ago
NSK Alamo, United StatesJob Description · Job Title: Maintenance Technician · Pay Range: $20/hr - $35/hr (Depending on Experience) · Location: Dyersburg, TN · Job Type: Full-Time · Shift: Shift is 6pm- 6:30am · 2-2-3 schedule · Work 2 days, off 2 days, work 3 days, off 2 days · Job Category: Manufacturi ...
-
Maintenance Technician
4 weeks ago
NSK Samburg, United StatesJob Description · Job Title: Maintenance Technician · Pay Range: $20/hr - $35/hr (Depending on Experience) · Location: Dyersburg, TN · Job Type: Full-Time · Shift: Shift is 6pm- 6:30am · 2-2-3 schedule · Work 2 days, off 2 days, work 3 days, off 2 days · Job Category: Manufacturi ...
-
Maintenance Technician
4 weeks ago
NSK Crockett Mills, TN, United StatesJob Title: Maintenance Technician · Pay Range: $20/hr - $35/hr (Depending on Experience) · Location: Dyersburg, TN · Job Type: Full-Time · Shift: Shift is 6pm- 6:30am · 2-2-3 schedule · Work 2 days, off 2 days, work 3 days, off 2 days · Job Category: Manufacturing and Safety · Th ...
-
Apartment Maintenance Technician
4 days ago
Property Management Company Caruthersville, United StatesJob Description · Job DescriptionWe are currently seeking an Apartment Maintenance Technician to join our team You will be responsible for completing work orders and other required tasks. · Responsibilities: · Complete work and repair orders in a timely fashion · Estimate time an ...
-
Maintenance Technician
4 weeks ago
NSK Halls, United StatesJob Description · Job Title: Maintenance Technician · Pay Range: $20/hr - $35/hr (Depending on Experience) · Location: Dyersburg, TN · Job Type: Full-Time · Shift: Shift is 6pm- 6:30am · 2-2-3 schedule · Work 2 days, off 2 days, work 3 days, off 2 days · Job Category: Manufacturi ...
-
Maintenance Technician
3 weeks ago
NSK Friendship, TN, United StatesJob Title: Maintenance Technician · Pay Range: $20/hr - $35/hr (Depending on Experience) · Location: Dyersburg, TN · Job Type: Full-Time · Shift: Shift is 6pm- 6:30am · 2-2-3 schedule · Work 2 days, off 2 days, work 3 days, off 2 days · Job Category: Manufacturing and Safety · Th ...
-
Maintenance Technician
4 weeks ago
NSK Yorkville, United StatesJob Description · Job Title: Maintenance Technician · Pay Range: $20/hr - $35/hr (Depending on Experience) · Location: Dyersburg, TN · Job Type: Full-Time · Shift: Shift is 6pm- 6:30am · 2-2-3 schedule · Work 2 days, off 2 days, work 3 days, off 2 days · Job Category: Manufacturi ...
-
Maintenance Technician
4 weeks ago
NSK Eaton, United StatesJob Description · Job Title: Maintenance Technician · Pay Range: $20/hr - $35/hr (Depending on Experience) · Location: Dyersburg, TN · Job Type: Full-Time · Shift: Shift is 6pm- 6:30am · 2-2-3 schedule · Work 2 days, off 2 days, work 3 days, off 2 days · Job Category: Manufacturi ...
-
Maintenance Technician
1 week ago
Aerotek Blytheville, United StatesAerotek - JobID: JP [Maintenance Technician] As a Maintenance Worker at Aerotek, you'll: Perform general and preventative property maintenance; Repair or general maintenance work of facilities, buildings, grounds, and equipment; Perform other duties as assigned...Hiring Immediate ...
-
Maintenance Technician
4 weeks ago
NSK Crockett Mills, United StatesJob Description · Job Title: Maintenance Technician · Pay Range: $20/hr - $35/hr (Depending on Experience) · Location: Dyersburg, TN · Job Type: Full-Time · Shift: Shift is 6pm- 6:30am · 2-2-3 schedule · Work 2 days, off 2 days, work 3 days, off 2 days · Job Category: Manufacturi ...
Multi-Craft Maintenance Technician - Dyersburg, United States - HEXPOL
Description
Job Description
Job DescriptionThis is a 3rd shift position
Position: Multi-Craft Maintenance Technician
Department: Maintenance
Position Reports to: Maintenance Supervisor / Maintenance Manager / General Manager/Managing Director
FLSA Status: Hourly, Non-Exempt
Location: Site
Position Summary
To maintain production machinery and mechanical equipment in proper repair and working condition according to schedule, fabricating basic machine parts and mechanical equipment parts and providing replacement parts. To install, test, service, trouble shoot and repair all facility electrical equipment and systems
Essential Duties/Responsibilities
Education, Skills, and Experience Requirements