Supervisory General Engineer - West Point, NY, United States - Department of the Army

Description

DutiesServes as the Deputy Director, Directorate of Public Works (DPW).

As second in line of authority within the DPW, shares in the overall technical and administrative management of the Directorate.

Provide leaders with strategies and viable solutions to program problems.

Coordinates the activities of all DPW organizational elements daily, providing direction, supervision, guidance, and technical assistance in all program areas.

Serves as professional advisor and consultant on engineering matters, attending policy, community relations, and planning conferences and meetings with Garrison, USMA command and staff personnel and other governmental agencies.

Keeps apprised of the progress of operations, to provide remedial assistance, assure proper scheduling of priorities and explain implications of policy revisions.

Requirements Conditions of EmploymentAppointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.

This position is supervisory as defined by the Office of Personnel Managements (OPM) General Schedule Supervisory Guide (GSSG). A one-year probation to assess your ability to perform supervisory duties is required unless previously completed.


QualificationsWho May Apply:
Only applicants who meet one of the employment authority categories below are eligible to apply for this job.

You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected.

See Proof of Eligibility for an extensive list of document requirements for all employment authorities.

Current Department of Army Civilian EmployeesCurrent Department of Defense (DOD) Civilian Employee (non-Army)Executive Order (E.O Interagency Career Transition Assistance PlanLand Management Workforce Flexibility ActMilitary Spouses, under Executive Order (E.

O Non-Appropriated Fund Instrumentality (NAFI)Non-Department of Defense (DoD) TransferPeople with Disabilities, Schedule APriority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician EligiblePriority Placement Program, DoD Military Spouse Preference (MSP) EligiblePriority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability RetirementPriority Placement Program, DoD Retained Grade Preference EligibleReinstatementVeterans Employment Opportunity Act (VEOA) of 1998
In order to qualify, you must meet the education and experience requirements described below.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social).

You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience. Your transcripts will be required as part of your application. Additional information about transcripts isin this document.

Basic Requirement for Supervisory General Engineer:
A


Degree:
Bachelor's degree (or higher degree) in engineering.

To be acceptable, the program must:
(1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B.


Combination of Education and Experience:

College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.

The adequacy of such background must be demonstrated by one of the following:

• Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
• Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
• Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
• Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience:
One year of specialized experience which includes: 1) Providing technical assistance on site planning, facility layout and/or development for engineering and/or facility management operations; 2) Leading/supervising engineering and/or facility management operations; and 3) Prepares and delivers training briefs, work plans and/or budget spend plans.

This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-13).

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience aloneno substitution of education for experience is permitted.
You will be evaluated on the basis of your level of competency in the following areas:LeadershipPlanning and EvaluatingProgram ManagementTechnical Competence

Time in Grade Requirement:

Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-13).

Education


FOREIGN EDUCATION:

If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S.

education program; or full credit has been given for the courses at a U.S. accredited college or university.


For further information, visit:
.
Additional informationMale applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
You will be required to provide proof of U.S. Citizenship.
One year Supervisory trial/probationary period may be required.
Direct deposit of pay is required.
Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.

If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.

This is a(n) 18 Career Field position.
Multiple positions may be filled from this announcement.
Salary includes applicable locality pay or Local Market Supplement.

When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable.

Visit for more information.

Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.

Recruitment and relocation incentives may be authorized.
Student loan repayment may be authorized.
Salary negotiations for those candidates who are NEW to Federal service MAY be authorized.
Credit for Prior Non-Federal Work Experience and Certain Military Service for Determining Annual Leave Accrual Rate may be authorized. Help

A career with the U.S. government provides employees with a comprehensive benefits package.

As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding.

Opens in a new windowLearn more about federal benefits.

Review our benefitsEligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent.

Contact the hiring agency for more information on the specific benefits offered.

How You Will Be EvaluatedYou will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement.

If you are minimally qualified, your resume and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process.

If selected, you may be required to provide supporting documentation.
You may claim Military Spouse preference.

Military Spouse Preference (MSP) applicants will receive preference consideration and will be placed (if selected) at the highest grade for which they have applied and are determined best qualified, up to and including the full performance level.

You may claim Priority Placement Program (PPP) preference.
DoD Priority Placement Program (PPP) Applicants will receive preference consideration at the full-performance grade level only.
Only MSP/PPP applicants currently occupying a formal training program position are entitled to exercise their priority status.
Interagency Career Transition Assistance Program (ICTAP).

If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position.

To receive selection priority, you must:
(1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.