Technician, Measurement - USA - New Mexico - Carlsbad
13 hours ago
Job description
Enterprise Products Partners L.P. is one of the largest publicly traded partnerships and a leading North American provider of midstream energy services to producers and consumers of natural gas, NGLs, crude oil, refined products and petrochemicals. Our services include\: natural gas gathering, treating, processing, transportation and storage; NGL transportation, fractionation, storage and import and export terminals; crude oil gathering, transportation, storage and terminals; petrochemical and refined products transportation, storage and terminals; and a marine transportation business that operates primarily on the United States inland and Intracoastal Waterway systems. The partnership's assets include approximately 50,000 miles of pipelines; 260 million barrels of storage capacity for NGLs, crude oil, refined products and petrochemicals; and 14 billion cubic feet of natural gas storage capacity.This position includes:
- Retention Bonus
- Hourly Premium Adjustment Pay
- Installing, programming and calibrating EFM Flow computers, change orifice plates and transmitters.
- Calculating volume rates and sizes of orifice plates to set flow rates.
- Collecting gas and liquid samples.
- Installing, operating and maintaining gas and liquid sampling systems.
- Installing, programming, maintaining and calibrating portable and stationary gas or liquid chromatographs.
- Acquiring information on site using stain tubes or electronic devices for obtaining H2S, CO2, O2, water content and nitrogen.
- Developing and maintaining meter test schedules,
- Installing equipment from drawings, schematics and manufacturer's manuals.
- Troubleshooting and rectifying equipment failures using voltmeters and test equipment.
- Planning, scheduling and coordinating work with other departments to ensure timely completion of equipment installation and repair.
- Installing, maintaining and troubleshooting EFM radio telemetry system both full duplex and spread spectrum systems.
- Installing, maintaining and troubleshooting process controls, regulation equipment & relief valves.
- Operating appropriate PC software.
The successful candidate will meet the following qualifications\:
- High school diploma or G.E.D. equivalent is required.
- Technical certification or equivalent training in a mechanical environment or energy related field preferred.
- Valid driver's license with acceptable driving record is required.
- Possession of a strong commitment to personal and job safety.
- Must demonstrate mechanical aptitude and dexterity in the use of tools and equipment.
- Must be able to perform basic mathematical calculations and possess basic computer skills including spreadsheet and word processing applications.
- Must have good decision making skills and a strong work ethic.
- Ability to work independently as well as the ability to maintain and promote good working relationships within a team environment.
- Ability to assume responsibility, be flexible, perform duties and handle multiple tasks under potentially stressful and/or hazardous conditions.
- Must have reliable means of contact for call-out purposes; willingness to work overtime and handle call-outs.
- Must live or relocate to within 1 hour response time of job assignment.
- At least 3 years previous experience in the measurement field is desired.
- Must have understanding of and possess ability to use computers and understand and interpret equipment manuals.
- Will be required to provide understandable and legible reports.
- Must have a history of being dependable and reliable, take pride in a job well done, and enjoy working hard.
- Must have good organizational skills, good customer relation skills.
- Must possess good verbal and written communication skills with the ability to interface with land owners and other corporate and field personnel.
- Ability to work indoors and outdoors; in and around industrial and electrical equipment.
- Required to climb about equipment and work in confined areas and at various heights (i.e. tanks, between compressors, vessels).
- Ability to work in a standing, sitting, lying down, crouched or kneeling position.
- Ability to work in temperature extremes due to weather conditions and operating equipment.
- Must be able to wear special safety equipment while working and be able to lift and put on emergency breathing apparatus and/or protective equipment.
- Required to routinely react to visual, aural and other signals; including alarms and instructions.
- Required to visually inspect work.
- Must be able to regularly bend, stoop, and move from ground to higher levels; raise/lift up to 50 lbs. from ground level, manually transport a load up to 75 lbs., and apply up to 100 foot pounds of torque.
- Must have ability to get in and out of vehicles regularly and ride over rough roads.
- May interface with land owners, pipeline companies, producers, corporate contacts and other field personnel.
#LI-SW1
#IND123
Similar jobs
+Job Summary · Coterra is hiring a Measurement Technician in Reeves County, Texas or Carlsbad, New Mexico · +++ ...
3 weeks ago
Coterra is hiring a Measurement Technician in Reeves County, Texas or Carlsbad, New Mexico. As a Measurement Technician for Coterra, you will be responsible for executing and supporting measurement projects and maintenance on operations systems. · ...
1 week ago
The Measurement Technician supports oil and gas production operations by verifying measurement systems. · Perform field verification at oil and gas production facilities · Inspect measurement equipment and production systems · ...
2 weeks ago
+The Measurement Technician is responsible for the measurement of high and low pressure gathering systems. Other responsibilities include installing, programming and calibrating EFM Flow computers, change orifice plates and transmitters. · +Installing equipment from drawings, sch ...
2 weeks ago
The Measurement Technician is responsible for the measurement of high and low pressure gathering systems. · This position includes retention bonus and hourly premium adjustment pay. · Installing, programming and calibrating EFM Flow computers. · Covering gas and liquid samples. ...
2 weeks ago
Coterra is hiring a Measurement Technician for measurement projects and maintenance on operations systems. ...
1 month ago
This Measurement Technician role at ExxonMobil involves commissioning, maintaining, and repairing measurement equipment to determine the quantity and quality of produced oil and gas. · ...
4 days ago
The success of our Upstream business is the result of talent curiosity drive people who bring solutions every day to optimize our strategy energy chemicals lubricants lower-emissions technologies. · ...
4 days ago
Liquid Measurement Technician · Job Overview · The Liquid Measurement Technician is responsible for ensuring the accurate measurement and monitoring of the oil and gas production processes. You will install, calibrate, and maintain measurement equipment used in the oilfield. This ...
1 day ago
Measure gas flow and perform maintenance tasks. · ...
3 days ago
We are seeking a skilled and experienced Gas · Mechanical Technician to join our team. The ideal candidate will possess in-depth knowledge of gas measurement systems.Perform and oversee the calibration and maintenance of electronic gas flow measurement devices. · Troubleshoot is ...
4 days ago
The Measurement Technician Will Be Responsible For · Having basic knowledge of field measurement · Experience with flow computer configuration software · Ability to perform preventative maintenance · Knowledge of or familiarity with AGA/GPA Gas Measurement Guidelines, BLM and COG ...
1 day ago
The Service Technician Supervisor - Gaming is responsible for overseeing a team of technicians who diagnose, repair and service consoles and related equipment. This role ensures quality repair standards, timely service delivery and a high level of customer satisfaction. · ...
1 month ago
The Patient Care Technician provides high-quality patient-centered care by performing delegated tasks in alignment with the PCT's training and the department's needs. · ...
3 days ago
Airswift is searching for a Measurement Technician to work on a long-term contract near Carlsbad. · ...
2 weeks ago
The Field Survey Technician will assist in collecting data for boundary surveys, topographic surveys, and construction staking. · ...
1 month ago
We're looking for a hands-on Instrumentation Technician who thrives in the field · and takes pride in keeping critical systems running safely and efficiently. · Competitive compensation including a 401(k) plan. · Comprehensive benefit package. · ...
1 week ago
Field Service Technician – 14x14 Rotator in Carlsbad, NM
Only for registered members
We are seeking a skilled and experienced Field Service Technician to join our team in the Carlsbad, TX area, · supporting operations across the Permian Basin. · This is a · 14x14 rotational position, · where you'll work two weeks on and two weeks off, · supporting field operation ...
1 month ago
Safelite busca un tecnico para su equipo en Carlsbad (US). · ...
1 week ago
Cleans the service and customer areas. Performs routine building maintenance in such a manner as to minimize interruption of customers or employees. · ...
2 weeks ago